Chapter
Non-Linear Drive Control System for Electric Car
Optimizing Assembly Sequence Time Using Particle Swarm Optimization (PSO)
An Effect of Fractal Flow Conditioner Thickness on Turbulent Swirling Flow
Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process
Radio Frequency Identification (RFID) Application in Remanufacturing Operations
The Use of Multi-Agent Systems in Managing Sustainable Supply Chain
Optimization of Machining Parameters on Turning of Hybrid Metal Matrix Composite
Prediction of Wear Coefficient of Manganese Phosphate Coated AISI D2 Steel with Oil Lubricant
Development of Hazard Assessment for Hydrogen Refueling Station in Malaysia
Modeling and Simulation of Solar Powered Hydrogen System
Influence of Woven and Cross-Ply Laminates on Mechanical Properties of Coir Epoxy Composite
Geometrical Defect Evaluation of Cold Embossing AA6061 Based on FEA and Physical Modeling Technique
Performance of Turning Steels by Using Polycrystalline Cubic Boron Nitride Cutting Tool
Optimization of Parameter for HSS Tool Wear by Using Taguchi Method and Finite Element Method
Development and Structural Analysis of Injection Moulding-Hydraulics Clamping Unit Testing System
The Effects of Water Content towards the Packaging Properties of Paper Made from Coconut Coir
Review of Relationship between TQM and Business Performance
The Effect of Parameter Setting towards the Processing of Hinges Test Samples through Cadmould 3D-F Injection Moulding Simulation
Development of an Integrated FMEA (i-FMEA) Using DAIREC Methodology for Automotive Manufacturing Company
Application of Modified 4th Order Runge Kutta-TVD Scheme for the Flow Past through Symmetrical Model
Life Cycle Assessment of Membrane System for Wastewater Treatment: A Review and Further Research
Dynamics Control of Pendulums Driven Spherical Robot
Selecting a CNC Machine Tool Using the Intuitionistic Fuzzy TOPSIS Approach for FMC
An Integrated Approach for Sustainable Supplier Selection Using Fuzzy Logic and Fuzzy AHP
The Use of Taguchi-Grey-Fuzzy to Optimize Performance Characteristics in Turning of AISI D2
Effect of Mesh Topologies on Wall Heat Transfer and Pressure Loss Prediction of a Blade Coolant Passage
Power Consumption Modeling for Indoor Environment Using Artificial Neural Network
Effect of Different Filler Materials in the Development of Bipolar Plate Composite for Polymer Electrolyte Membrane Fuel Cell (PEMFC)
Integrated Steering System Design for Bus Driver Drowsy Behavior Change
Up-Scaling and Optimisation of Fire Fighting Ground Vehicle Track System
Effect of Tool Wear on Tool Life and Surface Finish when Machining DF-3 Hardened Tool Steel
Experimental Study and Analysis of the Influence of Drawbead against Restriction and Deep Drawing Force of Rectangular Cup-Cans with Tin Plate Material
Catalytic Steam Gasification of Waste Palm Tree Trunk Derived Bio-Char
Formation of Alumina Inclusions during Counter Diffusion of Aluminum and Oxygen Dissolved in Molten Iron
Comparison Results between MacCormack Scheme and Steger Warming Scheme for the Case of Supersonic Flow Pass through Divergent Nozzle
Aerodynamics Analysis on Unsymmetrical Fuselage Models
Development of STEP-NC Based Machining System for Machining Process Information Flow
Fuzzy Decision Tree Approach for Optimal Supplier Base
Effect of Gas-Jet Ignition Technique on the Extension of CNG Lean Combustion Limit
Analysis of Mixture Formation and Flame Development of Diesel Combustion Using a Rapid Compression Machine and Optical Visualization Technique
Experimental Design and Analysis of Relative Effects of Variable Factors on Electro Discharge Sawing Process Using Taguchi Approach
Melted Zone Characteristics of Laser Welded Titanium Alloy (Ti-6Al-4V) under Different Process Parameters
Application of Size Optimization on Steel Wheel Rim
Vibration Analysis of a Beam Structure Attached with a Dynamic Vibration Absorber
Effect of Wall Configuration on Atomization of Rapeseed Oil Diesel Spray Impinging on the Wall
Short Review: Effect of UV Light on Precipitation of Hydroxyapatite on TiO2 in Simulated Body Fluid
Energy Savings and CO2 Reduction through Solar Water Heater Technology in Sindh Pakistan
Effect of Cross Sectional Shape on the Energy Absorbing Characteristics of a Tube under Quasi-Static Loading
Educational Software for Stress Analysis of Idealized Thin Walled Open Sections
Scramjet Flow and Intake SBLI: Technical Challenges and Case Study
Effect of Sintering Temperature on Membrane Properties of Sayong Ball Clay
An Investigation of the Effect of Air Filter Elements on Spark Ignition Engine Performance
Wind Tunnel Testing of Composite Wing Flutter Speed due to Control Surface Excitation
Technology Transfer at Malaysia: Pharmaceutical Manufacturing Industry
Effects of Pulse Duration and Current on EDM Process of Allegheny Ludlum D2 Tool Steel
A Framework for Multivariate Process Monitoring and Diagnosis
Performance Study of Waste Heat Driven Pressurized Adsorption Chiller
Basic Concept of Implementing Artificial Bee Colony (ABC) System in Flow Shop Scheduling
Study of Indoor Air Quality in Academic Buildings of a University
Load Behavior Prediction in a Tumbling Mill
Influence of TiO2 on Selfclean Bio Coating
Influence of Bio Polymer Composites as Heat Absorption Coating
Computational Analysis of Frontal Area of a Front Grill Passenger Car
Effects of Cutting Condition on Surface Roughness when Turning Untreated and Sb-Treated Al-11%Si Alloys Using PVD Coated Tools
Differential Ceramic Shell Thickness Evaluation for Direct Rapid Investment Casting
Hydrogen as an Alternative: Life Cycle Cost Analysis between Hydrogen Internal Combustion Engine (Al+Hci) and Gasoline Engine Based on Brake Specific Fuel Consumption
Preliminary Fabrication of Polymer Membranes from Renewable Resources
Numerical Investigation of 2-D Free Convection of Nanofluid in L-Shaped Enclosure
Prediction of the Flow around a Surface-Mounted Cube Using Two-Equation Turbulence Models
A Review: Natural Fiber as Reinforcement in Waste Paper Recycling and its Processing Methods
Influence of Hot Compression Moulding of Biopolymer Filled Waste Granulate Biopolymer
PFI Retrofit-Kit as Green Technology for Small 4-Stroke S.I. Engine
Exploration of Fine Lines Profile Effects in Flexographic Printing
Heat Transfer Modeling of Metal Deposition Employing Welding Heat Source
An Investigation into Printing Processes and Feasibility Study for RFID Tag Antennas
Total Productive Maintenance: Competing or Complementary to other Initiatives?
Viability of Some Kano-Nigerian Clays for Refractory Applications
Evaluation of Noise and Air Flow on a Motorized Adaptive Valve Lift and Timing Engine
Promoting Sustainability through Water Hydraulic Technology – The Effect of Water Hydraulic in Industrial Scissor Lift
Theoretical Analysis of Close Loop Behaviour of Ideal Cascade Controller Structure for Positioning of XY Table Ballscrew Drive System
Effects of Intake Temperature and Equivalence Ratio on HCCI Ignition Timing and Emissions of a 2-Stroke Engine
Cost Reduction Through Value Engineering Practices in Manufacturing Assembly
Off-Road Seat Suspension Optimization by Particle Swarm Algorithm
Numerical Prediction of Heat Transfer from Localized Heating in Enclosure Using CIP Method
Performance and Emissions Characteristics of Diesel Engine Fuelled by Biodiesel Derived from Palm Oil
Turbulence Kinetic Energy Performance on Wind Turbine Blade Using CFD
Experimental Investigation of Mechanical Properties and Forming Capabilities in Thin Magnesium Sheet at Elevated Temperature
Numerical Prediction of Heat Transfer from Heated Thin Plate in a Square Cavity by Using LBM
Current Reverse Logistic for End of Life Computer in Malaysia
Investigation on Sand Particle Impingement on Steel Pipe in Two Phase Flow Using Acoustic Emission Technology
Investigating the Capability of Acoustic Emission Technology to Determine Slug Velocity in Gas/Water Two Phase Flow in Horizontal Pipes
Optimum Combustion Chamber Geometry for a Compression Ignition Engine Retrofitted to Run Using Compressed Natural Gas (CNG)
Modelling of Shockwave Propagation in Orthotropic Materials
Experimental Investigations and Modeling of Machining Titanium Alloy – Ti-6Al-4V
Sliding Wear Properties of near β Titanium Alloy as a Function of β Solution Treatment Temperature
The Influence of Hot Air Environment and Humidity towards the Performance of Folding Endurance for Polypropylene Hinges
Experimental Determination of Sound Absorption Coefficients of Four Types of Malaysian Wood
Effect of Powder Loading and Binder Materials on Mechanical Properties in Iron-ABS Injection Molding Process
Evaluation of Different Internal Structure and Build Orientation for Multijet Modeling Process
Acid Pretreatment of WC-Co for Surface Roughening and Cobalt Removal Prior to CVD Diamond Coating
Integrated Thermoelectric Power Generator - Wireless Sensor Node for Remote Area Application
Modeling River Stream Flow Using Support Vector Machine
Multivariate Process Monitoring and Diagnosis: A Case Study
Experimental Study on Ballistic Resistance of Sandwich Panel Protection Structure with Kenaf Foam as a Core Material against Small Arm Bullet
Active Force Control Applied to Spray Boom Structure
Hand-Arm Vibration Analysis of Palm Oil Fruit Harvester Machine
Modelling and Simulation the Flexible Link in Water to Generate Dissolved Oxygen
The Effect of Compression Temperature and Time on 2D Woven Kenaf Fiber Reinforced Acrylonitrile-Butadiene-Styrene (ABS)
Plane-Stress Analysis of the New Stress Tensor Decomposition
Review on Anthropometric Test Dummy and Computational Modelling
The Effect of Optimum Number of Kanbans in just in Time Production System to Manufacturing Performance
Numerical Study on Heat Transfer and Fluid Flow Characteristic of Tube Bank with Integral Wake Splitter-Effect of Wake Splitter Length
Probabilistic Analysis of Surface Crack in Round Bars under Tension Loading
Surface Topography in Machining of AISI D2 Hardened Steel
Development of J-Integral Prediction Model for Surface Cracks in Round Bars under Combined Loadings
Mercerization Treatment Conditions Effects on Kenaf Fiber Bundles Mean Diameter Variability
Wettability of Molten Sn-Zn-Bi Solder on Cu Substrate Ervina Efzan
Vibration Analysis of Unbalanced and Misaligned Rotor System Using Laser Vibrometer
Lean Manufacturing Practices Implementation in Malaysian's SME Automotive Component Industry
The Novel Continues Biodiesel Proses Using Ultrasonic Clamp on Tubular Reactor
Hand-Arm Vibration of Unskilled Oil Palm Motorised Cutter Operator
The Influence of Plasma Nitrocarburizing Process Temperature to Commercially Pure Titanium Surface Hardness
An Axiomatic Approach to Design for Sustainable End-of-Life: A Review of Literature
The Effect of Drying Air Temperature and Humidity on the Drying Kinetic of Kenaf Core
Design and Analysis of a New Natural Illumination Device through Lumen Method Approach
Fabrication of TiB2-TiC Composites Optimized by Different Amount of Carbon in the Initial Ti-B-C Powder Mixture
Characterization of Chalawa River Sand for Foundry Application
Effect of Operating Temperature on Direct Recycling Aluminium Chips (AA6061) in Hot Press Forging Process
An EOQ Based Multi-Storage Location of Spare Part Inventories: A Case Study
Effect of Process Parameters on Quality of Cold Spinned Tube Head
Determination of Important Parameters and Technical Characteristic for Welding Fumes Index Development by Using QFD Approach
Dimensional Deviation Affected by Cutting Parameters and Machine Tool Rigidity in Dry Turning of S45C Steel
Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah
Computational Issues in the Simulation of High Speed Ballistic Impact: A Review
Laminate Orientation Effect on Drilling of Carbon Fiber Reinforced Plastic Composites
Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component
The Effect of Laser Focal Point Distance on Carbon Fiber Reinforced Plastics (CFRP) Cutting Performance
An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Daytime
An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night
Combustion Characteristics of Compressed Natural Gas in a Direct Microchannel-Injection Engine under Various Operating Conditions
Evaluation of Sustainability Performance of Product Design Element Concepts Using Analytic Hierarchy Process
The Effect of Oil Supply Pressure on the Circumferential Pressure Profile in Hydrodynamic Journal Bearing
Improvement of Mechanical Properties of Polycaprolactone (PCL) by Addition of Nano-Montmorillonite (MMT) and Hydroxyapatite (HA)
Hydrogen Embrittlement Susceptibility of Pipeline Steel
Evaluation of Sound Comfort in Examination Hall Using Acoustical Environmental Analyses
Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess
An Investigation of the Scope for Improvement of the Performance of Multi-Stage Downdraught Evaporative Coolers Using CFD
The Optimization in Machining AISI 1030 Using Taguchi Method for Dry and Flood Cutting Condition
Effect of High Performance EDM on Surface Characteristics of AISI D2 Hardened Steel
A Review of Experiments on Cold Start of PEM Fuel Cells
Effect of Pouring Temperature on Microstructure Properties of Al-Si LM6 Alloy Sand Casting
Mechanical Behavior of Polyurethane Composite Foams from Kenaf Fiber and Recycled Tire Rubber Particles
Creep Analysis of Functionally Graded Material Thick-Walled Cylinder
Energy Absorption Characteristics of Polyurethane Composite Foam-Filled Tubes Subjected to Quasi-Static Axial Loading
Computational Analysis of Mechanism Operability
The Substructures Technique Including Contact Problem
The Effect of Wavy Groove Liner on Pressure Distribution of Journal Bearing
Strategies for Integrating Quality, Environmental, Safety and Health Management Systems
Effectiveness of Enterprise Resource Planning System in Supporting the Lean Manufacturing
Melt Flow and Mechanical Properties of Polypropylene/Recycled Plaster of Paris
Investigation on the Fretting Wear of a Coated Substrate with Interlayer
Effects of Mig Welding to Corrosion Behaviour of Carbon Steel
Effect of Mica Content on the Physical, Mechanical and Morphological Properties of Alumina-Cullet-Mica Ceramic
An Exploration to Develop Concrete Walls Using MnxZn1-xFe2O4 Ferrite as Absorbing Material to Provide Defense against Electromagnetic Pollution
Boundary Conditions and Constraint Equations for Simulation of Energy Exchange
Friction Characteristics of RBD Palm Olein Using Four-Ball Tribotester
Palm Fatty Acid Distillate as an Alternative Source for Hydraulic Oil
Experimental Study on the Effect of Different Speeds Applied with Palm Olein Using Pin-on-Disk Tester
The Effect of Sliding Speed on Friction and Wear of RBD Palm Olein
Effects of Palm Oil Biodiesel Blends on the Emissions of Oil Burner
Towards Biomimetic Actuation in Prostheses Using Shape Memory Alloy
Analysis of Unimorph Piezoceramic Patches on Damped Square Shaped Plate
The Effect of Pretreatment Powder Using Ball Mill and Ultrasound on the Properties of Single Cell Solid Oxide Fuel Cell
Experimental Study of Oil Supply Pressure Effects on Bearing Friction in Hydrodynamic Lubrication
Study of the Influence of Normal and High Blood Pressure on Normal and Stenosed Carotid Bifurcation Using Fluid-Structure Interaction
Development of Wood-Based Composites Material for 3D Printing Process
Characterization of Micro Metal Injection Molding by Using PMMA & PEG
Experimental and Simulation Validation Methods of Local Exhaust Ventilation (LEV) in Training Facilities Building
Development of Mechanical Robot for Ducting Monitoring in Mechanical Ventilation and Air Conditioning (MVAC) System
Catalytic Combustion of Waste Palm Trunk Derived Biochar and Biomass
Mechanical & Manufacturing Engineering
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
