Chapter
An Intelligent Cutting Database for Die and Mold Making Operations
Study on Ultra-Precision Ball Surface Floating Polishing Kinematics Mechanism
A Novel Edge Detector for the Pressed Characters Based on the Facet Model and the Topographic Structures
Effect of Filler Shape and Volume Fraction on Strain Damage of Particulate-Reinforced Dental Composites
Study on the Synthesis Mechanism of Nanocrystalline Diamond Thick Films
Constitutive Equation for 7050 Aluminum Alloy at High Temperatures
The Validation of the Feasibility of Abnormal Form Patch Winding
Research on Material Removal Mechanism of Magnetorheological Finishing
The Fracture Microphology of the Ceramics by Strong Laser Shock Processing
Determining and Optimizing of Guide Rolls Motion Track in Cold Ring Rolling Process
A Novel Superfine Machining Technology Based on the Magnetorheological Effect of Abrasive Slurry
Research on Variation of Stress and Strain Field and Wall Thickness during Cone Spinning
Research of Mechanism of Chipping in Step Tapping of Superalloy Based on Wavelet Analysis
Wear Characteristics of ID Saw Blade in Silicon Ingot Slicing Process
An Analytical Model for Electrically Actuated Scanning Probe in Electrostatic Force Microscopy
Study Morphology Transitions in Self-Assembled Triblock Copolymer Thin Films with Nanostructures by AFM
Ultra-Precision Cutting of Brittle Materials with Ultrasonic Vibrated Diamond Tool
Experimental Research on Machining Performance of Electrode Materials in Dry EDM
Analysis of Disassembled Module with Damage Model for Recycling
Research on Mechanism of Electrochemical Mechanical Finishing
Arc Envelope Grinding of Non-Axisymmetric Aspheric Surface Using Equal-Envelope Height
Research on the Plunge Milling Techniques for Open Blisks
The Study of Tool Wear and Breakage Based on the Characteristic Analysis of Acoustic Spectrum
Fabrication and Characterization of HA/CNT Bioceramics
Research on Stress and Strain Distribution during Multi-Pass Conventional Spinning under Different Roller Motion Modes
Research on Influence of the Material Anisotropy to the Surface Quality during SPDT Machining of Crystal KDP
Analysis of Chip Breaking Prediction in Cutting Aluminum Alloys
Research on Thermal Spray Al-Al2O3/TiO2 Coating and Diffusion Treatment on Magnesium Alloy
Fabrication of Microelectrode by Current Density Control in Electrochemical Micromachining
Study on Technology of Micro-EDM with Lower Working Voltage
Research on a Novel Testing Way for Collective Short Cracks by Industrial CT
Modeling of Back Pressure Distribution on the Wafer Loaded in a Multi-Zone Carrier in Chemical Mechanical Polishing
Study on Process of Planing Forming of Plate Fin Heat Sinks
Study on Surface Integrity of an Ultra-High Strength Alloy in HSC Process
Study on the Multi-Phase and Multi-Scale Nanocomposite Ceramic Tool Material
Deposition and Characterization of Ultra-Smooth Nanocrystalline Diamond Films Using a Graphite-Grid Assisted Hot Filament CVD Method
Research on EDC Special Pulse Generator and Its Experiments
Study on Effects of the Feed on AFM-Based Nanomachining Process
A Reappraisal of Various Compacting Processes for Wasted Expandable Polystyrene (EPS) Foam
Study on Scanner for Large-Diameter Tubular Joint Welds Based on Ultrasonic Phased Array
Performances of HSK Spindle/Toolholder Interface for HSM
Study on Finishing Cut with Dry WEDM
Research on the Curvature Radius of Roller-Trace in the Forming Process of Conventional Spinning
Effect of TiN and Al2O3 on the Low Temperature Degradation of 3Y-TZP
Comparison of Bending Strength for Metal-Diamond Composites of Two Bond Matrices
Research on Grinding Temperature of WC-Co Coating by Cup Wheel
Research on the Cutting Track of Cutter and Fuzzy Comprehensive Evaluation for High Speed Ball-End Milling
Prediction of Surface Quality for Silicon Carbide Wheel Grinding of Silicon Nitride
The Influence of Acoustic Cavitation to Microscopic Material Removal in Polishing Process Based on Vibration of Liquid: A Numerical Study
Fabrication of Micro Structure Using EDM Deposition
Research on the Modeling Algorithm for the Camber of Large-Sized Revolving Parts
Kinematic Modeling and Error Analysis for a 3DOF Parallel-Link Coordinate Measuring Machine
A Study on Machining Quality of a Kind of Functional Hollow Lightweight Metallic Micro-Helixes by Bio-Limited Forming
Dry-Cutting Concrete Study of Diamond Saw Blade with Different Segment Width
Study on the Method for the Optimization of Cutting Parameters
Study on the Thermal Properties of Phenolic Resin Mix-Modified by Nano-Alumina
An Air Texturing Process for Hybridization of Different Reinforcement Filament Yarns by Commingling Process
Breaking Elongation Properties of Hybrid Yarns by Commingling Process
Research on High Speed Face Milling Cutter Based on the Model of Stress Field
Laser Fabrication of Low Resistivity Electrode on Glass
Study on Machinability of 35CrMnSiA Steel in Hard Turning Process
Study on Fabrication of a Large Al-Cu-Mn Wheel with Indirect Squeeze Casting Process
Research on Nano-Cutting Processes Based on Parallel Molecular Dynamics
Rotary Ultrasonic Machining of Advanced Ceramics
Research on the Boring Chatter Suppression Based on MR Fluid
Effect of Air Cooling on the Process of High Speed Hard Cutting GCr15
Microstructure and Performance of Porous Ni-Cr Alloy Bonded Diamond Grinding Wheel
Induction Brazing Diamond Grinding Wheel with Ni-Cr Filler Alloy
Performance of Brazed Diamond Wheel in Grinding Cemented Carbide
Comparison of Different Diamond Coatings in Co-Based Bond Matrix for Wire Saws
Research on Adhesion Failure of Milling Insert and Mechanical-Thermal Coupled Field in Milling of Difficult-to-Cut Materials
An Approach to the Influence of Flotative Abrasive Balls on Polishing Process
Study on the Fabrication of Blazed Grating with Sub-Micrometer Space on Aluminum Film
Research on the Relationship between the Clearance and Product Precision of Micro Punching Dies
Mechanism of Organic Grinding Fluid of Ceramics Based on Long Carbon Chain Alcohol and Halogenated Hydrocarbons
Research on Properties of Ternary Boride Hard Alloy Materials Added Nickel and Chromium
Effect of Different Edge Preparation on High Speed Turning Hardened Steel Process
Surface Roughness Characteristics of Finely Ground Ceramics
Nano Ferrofluidic Scale the String Axle of Big Length to Radius
Optimizing TiN Coating Surface Roughness with RSM
Experimental Researches on Rapid Forming Full Compacted Metal Parts by Selective Laser Melting
FEM Analysis of Grinding Damage Mechanisms for Ceramics Materials
Study on the Wear of Diamond Beads in Wire Sawing
Prediction and Design of the Optimal Punch Shape for Recess Forging
Experiment Study on Machinability of Six Kinds of Wrought Nickel-Based Superalloys
Analyze and Correct Model for Machining Involute Spline
Study of the Removing Depth of the Polishing Surface Based on a Novel Spinning-Inflated-Ballonet Polishing Tool
Application of an Intelligent Force Controller for Robotic Deburring Process
Study on Fixed Abrasive Lapping Technology for Ceramic Balls
Investigation of Technology and Analysis of Residual Stress in Large Area Diamond Films
Fabrication of Ultra-Fine Abrasive Polishing Pads by Gel Technique
A Study of Double Sided Polishing Process for Ultra-Smooth Surface of Silicon Wafer
Finite Element Analysis of the Electromagnetic Field of Untouched Permanent Induction Magnetic Coupling
Effects of CH4 Concentration on CVD Diamond Coatings Deposited on Cemented Carbide Cutting Cools
On Study of Cutting Forces Generated by Minor Cutting Edges
Parameters Optimization on the Lapping Process for Advanced Ceramics by Applying Taguchi Method
Manufacturing Technique of High Precision Intricate Diamond Dressing Roller
Study of Fuzzy Integral and Support Vector Machine Algorithm in Machinery Diagnosis
A Practical Approach to Generating Accurate NURBS Tool Paths for CNC Machining of Sculptured Surface Parts
Application of Atmospheric Pressure Plasma in the Ultrasmooth Polishing of SiC Optics
Technology and Study on Circular Arc Flexible Forming of Sheet Metal Using Plasma Arc
Evolution Trends of Material Usage and Processing in Spectacle Frame
An XML-Based Middleware for Information Integration of Enterprise Heterogeneous Systems
Variable Radius Conformal Cooling Channel for Rapid Tool
Fabrication of Patterned Metal Films on Organic Substrates by Transfer Printing
Study on Pre-Stress Cutting of Bearing Race and Its Machined Surface State
Study on Material Removal Mechanism of Fine-Crystalline ZrO2 Ceramics under Two Dimensional Ultrasonic Grinding
Effect of Rounded Cutting Edge Radius on Residual Stress within Machined Sublayer
Study on Surface Integrity in Hard Milling of Hardened Die Steel
Defect Free Machining of Glass with Improved Surface Characteristics
Metal Machinability Evaluation with DEA Method
Development of a Control System on 5-Axes Automatic Scanning for Nondestructive Ultrasonic Test
Subvoxel Level Short Crack Simulation and Visualization
The Study of Collateral Damages in the Process of Femtosecond Laser Micromachining Single-Crystalline Silicon
Microstructure and Mechanical Property of Electron Beam Brazing and Vacuum Brazing Joints of Stainless Steel
Fabrication of Three-Dimensional Micro-Structures with Two-Photon Absorption by Femtosecond Laser
Ultrafast Relaxation Character of Nonequilibrium Carriers in GaAs Excited by Femtosecond Laser
Study on Connotation and Architecture of the Ecological Economic Booster Explosive Green Manufacturing Process
Formation and Control of Feed Direction Burrs in Machining
Research of Surface Hardening Based on Transverse Feed Grinding
Experimental Study on the Growth Behaviors of Oxide Layers in ELID Pre-Dressing Process
The Centerline Position Measuring and Online Machining Compensation of the Rail Base for High-Speed MAGLEV
A Study on Ti3SiC2 Reinforced Copper Matrix Composite by Warm Compaction Powder Metallurgy
Laser Marking System of 3D Nondestructive Anti-Counterfeiting Identifiers Based on Liquid Crystal Mask
Study on the Intelligent Control of Springback in Stretch Bending Process Based on Neural Networks
A CAI System for GNC Precision Complex Product
Research on the 5-axis Machining of Blisk
Research on the Chatter Suppression During Machining Thin-Walled Complex Blades
Studies on the Solid Conveying Process in Micro Injection Molding Machine
Effects of Surface Conditions on Rheological Properties and Phase Orientation of Sheared LCP Melts in Nanochannels by MD Studies
Reconfiguration Methods for Exception Handling in Reconfigurable Manufacturing Systems
Study on the Approach of Deformation Path Control Using Numerical Simulation and Neural Network
Study of the Classification of Cutting Forces and the Build of Accurate Milling Force Model in End Milling
Study on Formalizable Aircraft Assembly Process Planning Knowledge
Tool Wear and Surface Integrity in High Speed Milling of a Near Alpha Titanium Alloy
Damage Analysis of Particulate Polymer Composites Based Structure by Using Micro-Meso-Macro Finite Element Approach
Design and Production of Wind Tunnel Testing Models with Selective Laser Sintering Technology Using Glass-Reinforced Nylon
Diode Laser Modification of Surface Gradient Layer Properties of a Hot-Work Tool Steel
High-Quality NC-Data Generation in Mold and Die Manufacturing
A Novel Fabrication Method for Mold Insert of Injection Molded Microlens Array
The Solving Methods of Dwell Time or Pressure in CCOS for Optical Complex Surfaces
Study on the Tool Path Generation of an Automotive Headlamp Reflector in Ultra-Precision Raster Milling
Synthesis and Analysis of 4-DOF Parallel Manipulator with Passive Subchain
Temperature and Humidity Effects on Micro/Nano Handling
Convenient Method to Fabricating Complicated Microstructures on Thermoplastics
An Investigation of Form Compensation in Fabricating Microlens Arrays by Ultra-Precision Fast-Tool-Servo Technology
A Study of a Digital Manufacturing Procedure for Freeform Optics
The Effect of Up-Cutting and Down-Cutting Directions on Materials Swelling in Ultra-Precision Raster Milling
Numerical Simulation on Thixoforming of Wrought Magnesium Alloy
Topological Design of Three-Dimensional Microstructure Based on Homogenization Effective Method
Determination of the Interface Heat Transfer for the Investment Castings of Aerofoil-Shaped Turbine Blades Using Optimization and FE Method
Efficient Algorithms for Calibration of Cutting Force Coefficients in Flat End Milling
The Calculation of Two-Phase Gas/Liquid Homogenous Flow in Bearing Chambers
Thermal Elasto-Plastic Asperity Contacts of Layered Media
Using Gray Forecasting Estimates Cost of Aviation Project
Cutter Optimal Selection of CAPP System Facing to the Modern Manufacture
3D Rigid-Viscoplastic FEM Simulation of Forging Process of a Gas Turbine Rotor Blade
Development of 3D Parameterized Design System for Turbine Compressor Impellers
Maximum Shear Stress Analyses of the Cermet Cladding Part under Wear Condition
Fabrication of Fiber-Reinforced CPC Composite Artificial Bone by RP/RT
Finite Element Simulation of High-Speed Cutting Alloy Cast Iron
Finite Element Analysis of Cutting Forces in High Speed Machining
Optimization of the Clamping Scheme of the Aero Monolithic Component Based on Even-Bedded Residual Stress Distribution
Research on Product Systematic Innovative Design Based on TRIZ
Application of Numerical Simulation in Analysis and Optimization of Constant Flux Blanking Plug
On Auto-Programming for NC Machining of Aspheric Curve
Study on Ultrasonic Vibration Assisted Grinding in Theory
Research on Modeling Turbine Blade in Reverse Engineering
Study on Side Contact Layer Model and Parameters in Quick-Point Grinding
Cutter Location Generation Via Development of UG/OPEN API for Turbine Blades Machining
General Subdivision Inferred from Catmull-Clark Subdivision Algorithm
Modeling of Virtual Machining System for Contour Milling of Gear Indexing Cam
The Kinematic Analysis of a Novel Parallel Machine Tool with 3-HSS Structure
Thermal Effects on Elasto-Plastic Contacts between Rough Surfaces
Research on Machinability and Evaluation Methods of Feature-Based Part under Concurrent Engineering Environment
A Study on the Process Sequence Design of a Tub for Washing Machine Container by Finite Element Analysis
Representation of Developable Surfaces and Achievement of the Algorithm
Mechanical Models and Numerical Simulation of Rolling Compaction for Metal Powders
Module and Product Family Formation Based on Improved Interpretive Structure Model
Optimization Design of Heterogeneous Mold Based on Genetic Algorithm
Research on Application Technology of Customer-Oriented Product Cooperative Design
Simulation of Gas-Solid-Liquid Three-Phase Flow Inside and Outside the Abrasive Water Jet Nozzle
Technology of Redevelop and Intelligent Reconfiguration Oriented to Open CNC System
Modeling of Mold Filling Process of Al Casting and Validation with X-Ray In-Situ Observation
Cutting Force Experiment and Simulation by Hard Turning GCr15 Bearing Steel with High Speed Considering Cutting Edge Preparation
The Research on the Orientation Error of Three-Axis Turntable in Theory and Measuring Method Based on Assembling
Study on the New Tooth Profile of Silent Chain
Study on the Technology of Bridge Crane Design and Explore with Green Quality Function Deployment
Application of Abductive Network and FEM to Predict the Maximum Forging Force and the Final Face Width of Spur Gear
The Prediction of Earing and the Design of Initial Shape of Blank in Cylindrical Cup Drawing
The Study of Five-Axis NC Simulation by Stencil Buffer Algorithm
An Optimal Feed Interpolation Algorithm for High-Speed Five-Axis Machining
A Virtual Cutting Based Method for Aero Engine Turbine Blade Reverse Modeling from Its Cone Beam CT Images
Elastic-Plastic Contact Analysis of Materials with Gradient Yield Strength
Study on Non-Interference Normal Tracking Algorithm for NC Quick-Point Grinding of the Curve Parts
A New Method for Solving the Direct Kinematics of 6-DOF SPS
Contact Analysis and Optimization of Elastic Orientating Component by Finite Element Method
Research on GA-ANN Integration and Its Applications to Cold Extrusion Process Design
TRIZ-Aided Innovation in Conceptual Design of Control Strategies
Real-Time Model Building and Experiment Researching of Grinding Force for External Plunge Grinding Process
Research on Integration Technology of Numerical Engineering Collaborative Design and Simulation Platform
Case-Based Assembly Coordination Process Planning for Aircraft
Research on an Information Integration Framework on the Large Complex Product Development PMIS with ERP
Experiment Study on Shape Defect of Cylinder Shallow Shell
Numerical Simulation of Orthogonal Cutting Process of a Kind of Difficult-to-Cut Material
Research on XML-Based Database Integration for Collaborative Design and Manufacture of Space Antenna
Manufacturing-Oriented Multi-State Model for Aircraft Sheet Metal Parts
Prediction of Shot Peen Forming Parameters of Integral Aircraft Wing Panels
Firm Discrimination Pricing Strategies with Network Effect
A Study on Titanium Alloys Deep-Hole Drilling Technique
Applying Hierarchical Clustering to Discover the Typical Process Route
Numerical Simulation of Heat and Mass Transfer of the Infiltration in Liquid Infiltration Extrusion Process
Numerical Simulation of Temperature Field and Grain Structure in the Solidification of K4169 Superalloy Shell Casting
A New Adaptive-Surface Elastic-Plastic Contact Model of Rough Surfaces: Parameter Correlations
Design of Forming Sheet Electrodes in Electrochemical Finishing of ZDC2 Castings Surface
Investigations on Edge Chipping in Rotary Ultrasonic Machining Using Finite Element Analysis
Study of the Strain Rate Effect on Cold-Reduced Carbon Steel and Aluminium Alloy with Numerical Simulations
Effects of Stress Relieving on Limit Dome Height of Titanium Tailor-Welded Blanks at Elevated Temperatures
Forming Simulation of Ti-TWBs at Different Elevated Temperatures
Decision Model in Selecting Engineering Materials for Pump Manufacture
Surface Characterization in Diamond Turning of Highly Anisotropy Brittle Crystals: A Multi-Spectrum Analysis Approach
Mechanical Event Simulation of Drop Testing for Toy Product
A Web-Based Cost Estimation System for Collaborative Development of Injection Mould
A New Algorithm to Refresh File Aggregates in Distributed Enterprises
Real-Time Dispatch Strategy for Products Manufacture Based on Singular and Lattice Order Rough Set Theory
The Applications of RFID Technology in Logistics Management and Constraints
Green Manufacturing of Suspended Bio-Carriers
A New Method on Judgment and Choice of Supplier in Core Enterprise under Supply Chain
A Model for Comparative Analysis of Inventory Costs of JIT and EOQ Purchasing in the Ready Mixed Concrete Industry
Research and Application in Supply Chain Management Based on Correlation Analyze of Association Rules Algorithm
Green, Flexible, Intelligent: Clamping System Based on Thermal Sensitive Material with Volume Effect
An Integrated Method for Product Material Selection Considering Environmental Factors and a Case Study
A New Approach to Achieve Lean Production in Workshop-Production Preparation Package
A CAS Approach for the Coordination and Optimization Problem in Supply Chains
Prediction of Spring Back of the Two-Axle Rotary Shaping Based on Neural Network
Research on Man-Machine Cooperation Manipulator and Information Integrated Technology in Advanced Manufacturing
An Exploratory Study of Logistics Service Quality Model
A Study on Multi-Colony Diploid Immune Algorithm and Its Application in Manufacture
A Study on the Aviation Manufacture Cell Scheduling Based on Adaptive Ant Colony Algorithm
Framework of Virtual Private Supply Chain Management
Study on Approach to Fuzzy Product Configuration Based on Vague Customer Requirements
Reconfigurable Manufacturing Execution Systems Based on Model-Driven Architecture
Research on the Problem of MC Assembly Line Balancing Based on Genetic Algorithm
Research on Analyzing and Coding Technology of Manufacturing Information Resource Based on Granularity-Structure
A Job Shop Scheduling Heuristic Algorithm Based on Probabilistic Model of the Search Space
A New Software Design Method Based on Configuration Conception
Improving Supply Chain Traceability with the Integration of Logistics Information System and RFID Technology
A Manufacturing Supply Chain Business Model and Its Implementation in a Plastics Manufacturing Company
STEP-NC Based Integrated CAD/CAPP/CAM/CNC System
Application of Ant Colony Algorithm and Grey Relation Theory in Selecting Cooperative Manufacturing Partner
A STEP-NC Programming System for Prismatic Parts
Research on Web Based Remote Monitor and Control System for Grinding Process
Knowledge Based Process Scheduling and Management for Multi-Agent Distributed Collaborative Manufacturing
Studying on the Life Cycle Information Share and Discovery for Complicated Products Based on Data Mining and Data Grid Technology
One Kind of Integrated Scheme of Regional Networked Manufacturing Systems
Implementation of Decision-Making Model System for Autonomous Vehicles in Virtual Environment
Measurement Technique of Grinding Wheel Topography Based on Binocular Stereo Vision
The Key Technology Research of Synchronous Collaborative Assembly Based on B/S Framework
Expert System of the Parameter Optimization in the Heavy-Duty Cutting Processing
Research on Innovative Product Design System Based on QFD and TRIZ
A New Approach to the Communication of the Distributed Collaborative System Based on COM+
Research on Sawing and Milling Features and NC Programming of Plastic Door and Window
Semantic Integration of Manufacturing Data Sources
Real Time Monitoring of Cutting Chatter Based on Fuzzy Hidden Markov Models
Monitoring Surface Roughness of Turning by Using Image Processing Technology
MMAP: An Intelligent Object Paradigm for the Monitoring and Control of Mobile-Enterprise
Advances in Materials Manufacturing Science and Technology II
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
