Description
Collection of selected, peer reviewed papers from the International Scientific and Practical Conference "Actual Problems in Machine Building", March 25th, 2015, Novosibirsk, Russian Federation. The 52 papers are grouped as follows: Chapter 1: Innovative Technologies of Materials Processing in Mechanical Engineering; Chapter 2: Applied Materials Science in Machine Building; Chapter 3: Technological Equipment, Machining Attachments and Instruments
Keywords: Technology, Technological Equipment, Machining Attachments, Instrument, Materials Science, Mechanical Engineering, Machine Building
The conference addressed the need for industries in Siberia to replace and modernize the equipment, and the mathematics and engineering required. The 52 papers cover innovative technologies of materials processing in mechanical engineering; applied materials science in machine building; and technological equipment, machining attachments, and instruments. Among the topics are forecasting machined surface waviness by analyzing self-oscillations, the impact of a magnetic field on a fine copper structure under creep failure conditions, the effect of thermo-mechanical treatment on the properties of steel with a mixed Martensitic-Bainitic structure, the fracture mechanics of thermo-mechanically processed low-carbon steel, the influence of pulsed heat and power supply on the structure and properties of welded joint metals and surfaced coatings, and equipment of in situ studies of the s
Chapter
Features of Forming the Surface Microrelief of Low-Wear Coatings by Electro-Diamond Grinding
Forecasting of Machined Surface Waviness on the Basis of Self-Oscillations Analysis
High-Precision Plasma Cutting of the Steel - Aluminum ”Bimetallic Composition“
Influence of Technological Parameters of High-Precision Plasma Cutting on the Position of the Anode Spot on the Cut Edge
Investigation of the Laser-Powder Cladding Effect on Steel Surface Hardening
Laser-Plasma Treatment of Structural Steel
Modeling of Deformation Processes for Conditions of Ultrasonic Frequency Impulse Impact on the Surface Layer of Metals and Alloys
Modeling of the Magnetic Abrasive Machining Process of Flat Surface Workpieces on Numerically Controlled Machine Tools
Nickel-Based Composition Coating with Titanium Nanoboride
Plastic Imprint Formation in the Process of Ultrasonic Surface Hardening
Quality Improvement of Wear-Resistant Coatings in Plasma Spraying Integrated with High-Energy Heating by High Frequency Currents
Selection of Synthesis Corundum Grain in Grinding Flat Parts from Hardened Steel 30ChGSA by the Macrogeometry Criterion
Some Provisions of Rational Contact Conditions for a Composite Cutting Tool during Turning Operations on Intermittent Areas
Chapter 2: Applied Materials Science in Machine Building
An Impact of the Magnetic Field on the Fine Copper Structure under Creep Failure Conditions
Analysis of the Influence of High Temperature Synthesis Parameters on the Structure Formation in the Mechanically Activated 3Ti+Al Powder Mixture
Cladding of Ni-Cr-Si-B Powder Coatings by an Electron Beam Injected into the Atmosphere
Depth Distribution of Temperature in Steel Parts during Surface Hardening by High Frequency Currents
Design of a Combined Setup for Simultaneous Measurements of the Microstructural and Thermo-Analytical Parameters of Nanogram-Size Samples
Dry Sliding Wear Behavior and Wear Mechanisms of Thermally Sprayed WCCo-Coatings
Effect of Plastic Deformation of the Initial Components and Particle Size Reduction on the Structure and Properties of the PN85YU15-Ni Composite Material Produced by Spark Plasma Sintering
Effect of Thermomechanical Treatment on the Properties of Steel with a Mixed Martensitic-Bainitic Structure
Effects of Heating Atmosphere on Structure and Thermal Expansion of Aluminum Alloys
Energy Approach to Material Hardness Determination
Formation of Intermetallic Structures by Spark Plasma Sintering of Titanium and Aluminum Powders
Fracture Mechanism of Thermomechanically Processed Low-Carbon Steel
Influence of Thermal Cyclic Deformation and Hardening Heat Treatment on the Structure and Properties of Steel 10
Mechanical and Tribological Properties of γ-TiAl-Based Coatings Produced by the Laser Cladding Technology
Meyer Law Application for Solving Problems of Surface Plastic Deformation by Spherical Indentation
Regularities of Changing Amorphous Metallic Alloys Properties under Exposure to External Influences
Shear-Type Mechanisms of Deformation Development in Structural Elements of a Deformation Relief
Simulation of Structure Formation Processes of Dissimilar Steels Welded Joints Using an Intermediate Layer
Structure of the Al-Сr-Ni Coating Formed on the H20N80 Alloy Substrate and its Transformation at 1150 °С
Structure, Properties and Texturing of Ti-Ta-Mo Alloys Produced by Non-Vacuum Electron Beam Surface Alloying of Ti
Surface Alloying of Cylindrical Steel Parts Using Non-Vacuum Electron Beam Treatment
Surface Hardening of Steel by Electron-Beam Cladding of Ti+С and Ti+B4C Powder Compositions at Air Atmosphere
Techniques of SrAl12O19 Platelets Formation in ZTA
The Effect of Heat Temperature on the Structure of Plasma Coating of the Ni-Cr-Si-B System
The Influence of Pulsed Heat and Power Supply on the Structure and Properties of Welded Joint Metals and Surfaced Coatings
The Structure and Corrosion Resistance of the Coatings Obtained by Non-Vacuum Electron Beam Cladding of the Ti-Nb Powder Mixture on a Titanium Substrates
Wear Resistance of Hypereutectoid Steel Alloyed with Copper and Aluminum
Wear-Resistant Coating on Hard Alloy
X-Ray Studies of Welded Joints of Ferrite-Pearlite Steels Working in Conditions of Low-Frequency Temperature and Force Loading
Chapter 3: Technological Equipment, Machining Attachments and Instruments
Analysis and Technology of the Bricard Linkage Kinematic Parameters Comparative Experiments
Equipment for In Situ Studies of the Surface Structure of Thin Surface Layers in the Process of their Formation
Metal Explosion Chambers and their Application
Prospective Designs of Flap Grinding Wheels – New Opportunities and Approaches to Import Substitution of Grinding Tools
Specifications of Machine-Tool Equipment: Forecasting Techniques
A Promising Method for Improving Wear Resistance of Metal Cutting Tools
Actual Problems and Decisions in Machine Building
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.