Author： Padma Sree R. Chidambaram M.
Publisher： Taylor & Francis Ltd
ISSN： 0098-6445
Source： Chemical Engineering Communications, Vol.192, Iss.1, 2005-01, pp. : 1-13
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
A systematic method is given for selection of the set point weighting parameter (b) in PI/PID controllers for unstable first-order plus time delay systems. The method is based on minimizing the integral square error (ISE) for a servo problem. The present work also extends the method of Chidambaram (2000a, 2000b) by minimizing overshoot for the cases of damping coefficient, >1 and =1. The responses of PID controllers without and with the set point weighting are compared. Simulation results are also given for an FOPTD transfer function system, for a higher order transfer function model, and on a nonlinear chemical reactor problem. The present method gives an improved performance.
Related content
ADDENDUM: SET POINT WEIGHTED PI/PID CONTROLLERS
Chemical Engineering Communications, Vol. 189, Iss. 5, 2002-05 ,pp. :
Access to resources
Recommend
Design of Optimal PID Controllers for Integrating Systems
Indian Chemical Engineer, Vol. 56, Iss. 3, 2014-07 ,pp. :
Tuning of PID Controllers for Continuous Stirred Tank Reactors
By Krishna D.
Indian Chemical Engineer, Vol. 54, Iss. 3, 2012-09 ,pp. :