Author： EFTEKHARI ALI
Publisher： Taylor & Francis Ltd
ISSN： 0098-6445
Source： Chemical Engineering Communications, Vol.192, Iss.7, 2005-07, pp. : 897-907
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
A system was designed based on a sensing process for continuous release of . A polymer-modified electrode was prepared by electropolymerization of aniline onto a platinum electrode from a solution containing the monomer and to form a layer of polyaniline/ (PA/FCN). The FCN incorporated into the polymer film can be released by applying a sufficient potential. An FCN-selective electrode was used as the counter electrode of the system. As the sensor exhibits potentiometric response to the FCN ions, the generated potential causes the release of from the polymer film electrode. The system was examined as a continuous releaser of for study of a chemical oscillator as a typical application.
Related content
Access to resources
Recommend
Inorganic modification of proton-conductive polymer DMFC membranes
Fuel Cells Bulletin, Vol. 2002, Iss. 10, 2002-10 ,pp. :
Phase diagram of the LaFeO3-LaSrFeO4 system
By Tugova E. Popova V. Zvereva I. Gusarov V.
Glass Physics and Chemistry, Vol. 32, Iss. 6, 2006-12 ,pp. :