Author： Rykowska Iwona Wasiak Wiesław
Publisher： Taylor & Francis Ltd
ISSN： 0306-7319
Source： International Journal of Environmental and Analytical Chemistry, Vol.91, Iss.15, 2011-12, pp. : 1466-1476
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
This paper describes our research on the synthesis of the sorbent with chemically bonded ketoimine groups, and, furthermore, using this sorbent in the SPE technique to extract and preconcentrate trace amounts of metal ions in water samples. Surface characteristics of the sorbent were determined by elemental analysis, NMR spectra for the solid phases (29Si CP MAS NMR), and analysis of pore size distribution of the sorbent and nitrogen adsorption-desorption. The newly proposed sorbent with ketoimine groups was applied for the extraction and preconcentration of trace amounts of Cu (II), Cr (III) and Zn (II) ions from the water from a lake, post-industrial water and purified water unburdened back to the lake. The determination of the transition-metal ions was performed on an emission spectroscope with inductively coupled plasma ICP-OES. For the batch method, the optimum pH range for Cu (II) and Cr (III) extraction was equal to 5, and Zn(II)–to 8. All the metal ions can be desorbed from SPE columns with 10 mL of 0.5 mol HNO3. The detection limits of the method were found to be 0.7 µg L−1 for Cu (II), 0.08 µg L−1 for Cr (III), and 0.2 µg L−1 for Zn (II), respectively.
Related content
International Journal of Environmental and Analytical Chemistry, Vol. 93, Iss. 8, 2013-07 ,pp. :
Access to resources
Recommend
By Wang Qihui Chang Xijun Hu Zheng Li Dandan Tu Zhifeng
International Journal of Environmental and Analytical Chemistry, Vol. 92, Iss. 11, 2012-09 ,pp. :
International Journal of Environmental and Analytical Chemistry, Vol. 82, Iss. 6, 2002-01 ,pp. :