Author： Abu Bakar Aznizam
Publisher： Taylor & Francis Ltd
ISSN： 0360-2559
Source： Polymer-Plastics Technology and Engineering, Vol.49, Iss.15, 2010-11, pp. : 1563-1570
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The influence of untreated and treated OPEFB content on the mechanical properties of acrylic impact-modified PVC was investigated. The formulations were first dry blended before being milled into sheets on a two-roll mill. Test specimens were then hot pressed. The modulus significantly increased while the impact and flexural strength insignificantly improved with increasing of treated OPEFB contents. The reduction in water absorption, the formation of new absorption bands and the slight number of treated fiber pulled-out proved that there was an interaction between fiber and matrix. However, this interaction was insufficient to enhance the impact and flexural strength significantly.
Related content
By Bakar A.
Polymer-Plastics Technology and Engineering, Vol. 44, Iss. 6, 2005-01 ,pp. :
Access to resources
Recommend
By Bakar Aznizam Abu Hassan Azman Yusof Ahmad Fuad Mohd
Polymer-Plastics Technology and Engineering, Vol. 49, Iss. 4, 2010-01 ,pp. :
By Abu Bakar Aznizam Baharulrazi Norfhairna
Polymer-Plastics Technology and Engineering, Vol. 47, Iss. 10, 2008-10 ,pp. :