Direct Selective Extraction of Actinides (III) from PUREX Raffinate using a Mixture of CyMe₄BTBP and TODGA as 1-cycle SANEX Solvent Part III: Demonstration of a Laboratory-Scale Counter-Current Centrifugal Contactor Process

By Wilden Andreas   Modolo Giuseppe   Schreinemachers Christian   Sadowski Fabian   Lange Steve   Sypula Michal   Magnusson Daniel   Geist Andreas   Lewis Frank W.   Harwood Laurence M.   Hudson Michael J.  

Solvent Extraction and Ion Exchange, Vol. 31, Iss. 5, 2013-08 ,pp. : 519-537

Taylor & Francis Ltd

Access to resources Recommend Favorite

Direct Selective Extraction of Actinides(III) from PUREX Raffinate Using a Mixture of CyMe 4- BTBP and TODGA as 1-cycle SANEX Solvent PART II: Flow-sheet Design for a Counter-Current Centrifugal Contactor Demonstration Process

By Magnusson Daniel  

Solvent Extraction and Ion Exchange, Vol. 31, Iss. 1, 2013-01 ,pp. : 1-11

Taylor & Francis Ltd

Access to resources Recommend Favorite

Demonstration of a SANEX Process in Centrifugal Contactors using the CyMe4-BTBP Molecule on a Genuine Fuel Solution

By Magnusson D.   Christiansen B.  

Solvent Extraction and Ion Exchange, Vol. 27, Iss. 2, 2009-03 ,pp. : 97-106

Taylor & Francis Ltd

Access to resources Recommend Favorite

Demonstration of a TODGA based Extraction Process for the Partitioning of Minor Actinides from a PUREX Raffinate

By Magnusson Daniel   Christiansen Birgit  

Solvent Extraction and Ion Exchange, Vol. 27, Iss. 1, 2009-01 ,pp. : 26-35

Taylor & Francis Ltd

Access to resources Recommend Favorite

Development of a TODGA based Process for Partitioning of Actinides from a PUREX Raffinate Part I: Batch Extraction Optimization Studies and Stability Tests

By Modolo Giuseppe   Asp Hanna   Schreinemachers Christian   Vijgen Hendrik  

Solvent Extraction and Ion Exchange, Vol. 25, Iss. 6, 2007-11 ,pp. : 703-721

Taylor & Francis Ltd

Access to resources Recommend Favorite