Author： Balasubramanian N.
Publisher： Taylor & Francis Ltd
ISSN： 0737-3937
Source： Drying Technology, Vol.25, Iss.10, 2007-10, pp. : 1595-1599
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Solid particles were dried in the riser of circulating fluidized bed with internals to study the drying kinetics. Experiments were conducted in a circulating fluidized bed, having perforated plates as internals covering wide range in the operating parameters. The effects of various operating parameters, i.e., initial moisture content, temperature, and flow rate, of the heating medium and solid circulation rate on the rate of drying have been critically examined. It has been observed from the present investigation that the presence of internals enhances the solids holdup in the riser of circulating fluidized bed. The drying efficiency of a circulating fluidized bed with internals has been compared with the drying performance of a circulating fluidized bed without internals under the same operating conditions.
Related content
Korean Journal of Chemical Engineering, Vol. 30, Iss. 4, 2013-04 ,pp. :
Access to resources
Recommend
Drying Kinetics of Paddy in a Reduced Pressure Superheated Steam Fluidized Bed
By Kozanoglu B.
Drying Technology, Vol. 31, Iss. 4, 2013-03 ,pp. :
Drying of Potato Slices in a Pulsed Fluidized Bed
Drying Technology, Vol. 25, Iss. 4, 2007-04 ,pp. :