Comparison of Methods for Estimating Carbonaceous Bod Parameters

ISSN： 0959-3330

Source： Environmental Technology, Vol.22, Iss.8, 2001-08, pp. : 915-926

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

The performance of seven different methods (Differential, Fujimoto, Thomas, Graphical, Integral, Log-Difference, and Nonlinear Regression) for estimating first-stage, carbonaceous biochemical oxygen demand (CBOD), curve parameters, namely k and L₀, were compared using synthetic data generated by Monte Carlo simulation technique. The comparison of the methods was made based on their efficiency in retrieving the original values of k and L₀, which were selected to generate the synthetic data. In the first part of the study, five sets of “true” data (without error substitution) with different k and L₀ value pairs, (k (d⁻¹)-L₀ (mg l⁻¹): 0.23-10,000; 0.23-250; 0.23-50; 0.10-250; and 0.50-250) were used to obtain information about the effect of different k-L₀ combinations and of using 5-day and 20-day CBOD data on the performance of the methods. In the second part, the same methods were used to calculate k and L₀ for ten sets of synthetic data with log-normally distributed random errors at the coefficient of variation (COV) levels of 0.1, 0.2, and 0.3 for a single k-L₀ value pair, (0.23 d⁻¹; 250 mg l⁻¹). The results indicated that: (1) different combinations of k-L₀ values had no significant effect on the performance of CBOD curve parameter estimation methods with the “true” data; (2) use of CBOD₂₀ data, i.e., CBOD data collected for 20 days, provided better estimates for k and L₀; (3) the Integral and Nonlinear Regression techniques were found to be the most reliable methods for the estimation of CBOD curve parameters among the other methods considered in this study.