Cavity Pressure Response and Melt Flow Length During Dynamic Injection Molding

By Hong-wu Wu   hai-hang Xu   Jin-ping Qu   Shao-dan Zhang  

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 8, 2006-01 ,pp. : 935-937

Taylor & Francis Ltd

Access to resources Recommend Favorite

The effects of velocity and viscosity on solid-liquid interfacial behavior during dynamic contact angle measurement

By Morra M.   Occhiello E.   Garbassi F.  

Journal of Adhesion Science and Technology, Vol. 6, Iss. 6, 1992-01 ,pp. : 653-665

Taylor & Francis Ltd

Access to resources Recommend Favorite

Burning Rate of Liquid Fuel on Carpet (Porous Media)

By Ma Tingguang   Olenick Stephen M.   Klassen Michael S.   Roby Richard J.   Torero Jose L.  

Fire Technology, Vol. 40, Iss. 3, 2004-07 ,pp. : 227-246

Springer Publishing Company

Access to resources Recommend Favorite

Determination of spreading pressure and its effect on polymer surface tension from contact angle data. Combination of the two-liquid contact angle method with the one-liquid contact angle method

By Erbil H. Yildirim  

Journal of Adhesion Science and Technology, Vol. 3, Iss. 1, 1989-01 ,pp. : 29-38

Taylor & Francis Ltd

Access to resources Recommend Favorite

MEASUREMENT OF THE FLOW RATE AND VOLUME VOID FRACTION OF GAS-LIQUID BUBBLE FLOW USING A VORTEX FLOW METER

By Sun Zhiqiang  

Chemical Engineering Communications, Vol. 197, Iss. 2, 2010-01 ,pp. : 145-157

Taylor & Francis Ltd

Access to resources Recommend Favorite