Optimisation of welding parameters in pulsed MIG/MAG welding with width-controlled sine-wave current pulses. Part 2: Determination of an optimum material transfer through the arc and a control method

By Langus Danijel   Kralj Viljem   Grum Janez  

International Journal of Materials and Product Technology, Vol. 29, Iss. 1-4, 2007-04 ,pp. : 255-271

Inderscience Publishers

Access to resources Recommend Favorite

The optimisation of powder flame-spraying parameters using a Taguchi method

By Grum J.   Bergant Z.  

International Journal of Microstructure and Materials Properties, Vol. 3, Iss. 4-5, 2008-12 ,pp. : 682-700

Inderscience Publishers

Access to resources Recommend Favorite

Design optimisation of machining parameters for turning titanium alloys with Taguchi-Grey method

By Satyanarayana Kosaraju   Gopal Anne Venu   Babu Popuri Bangaru  

International Journal of Machining and Machinability of Materials, Vol. 13, Iss. 2-3, 2013-04 ,pp. : 191-202

Inderscience Publishers

Access to resources Recommend Favorite

Optimisation of continuous casting process parameters based on coupled heat and stress model

By Chen W.   Zhang Y.-Z.   Wang B.-X.  

Ironmaking & Steelmaking, Vol. 37, Iss. 2, 2010-02 ,pp. : 147-154

Maney Publishing

Access to resources Recommend Favorite

Optimisation of brake friction material on tribological characteristics and cost using constrained mixture design method

By Ertan Rukiye   Yavuz Nurettin  

International Journal of Materials and Product Technology, Vol. 39, Iss. 3-4, 2010-10 ,pp. : 271-290

Inderscience Publishers

Access to resources Recommend Favorite