Greenhouse Covering Materials Measurement and Modelling of Thermal Properties Using the Hot Box Method, and Condensation Effects

Author: Feuilloley P.   Issanchou G.  

Publisher: Academic Press

ISSN: 0021-8634

Source: Journal of Agricultural Engineering Research, Vol.65, Iss.2, 1996-10, pp. : 129-142

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Two isothermal hot boxes were designed, built, and set up in the open to investigate the overall heat transfer coefficient or K factor (Wm K), of different greenhouse covers. Tests were made on plastic films and glass, both dry and in the presence of condensation. Experiments were conducted with the same cover on two boxes, one with condensation and the other without. Condensation was found to be favourable for plastic films as it reduced the overall heat transfer coefficient and hence heat losses. Conversely, condensation increased heat losses with glass. Anti-drop films were found to degrade with age, in terms of preventing drop formation, but this did not significantly modify the K factor. A model for the hot boxes was developed which allows simulation of the behaviour of plastic films or glass under predetermined conditions. Curves and simple regressions were computed which gave relationships between the K factor and the emissivity of the cover, the temperature difference, the wind speed and sky temperature. The accuracy of the external hot box method is within 2%, of the measured value of K .

Related content