Description
The subjects of the symposia are on composite materials with matrices behaving as brittle in normal or special conditions. Brittle matrix composites are applied in various domains (civil engineering, mechanical equipment and machinery, vehicles, etc.) and in the last decades their importance is increasing together with their variety. Papers include: aggregate-binder composites (concretes, fibre concretes, rocks); sintered materials (ceramics); high strength composites with brittle matrices. In principle, the general problems of structures made of composite materials are not included in the papers. Various approaches to the material engineering problems are presented in the papers.
Chapter
STUDY ON THE FLEXURAL BEHAVIOUR OF REINFORCED FIBROUS CONCRETE BEAMS
pp.：
24 – 36
ROUND PANEL VS. BEAM TESTS TOWARD A COMPREHENSIVE AND HARMONIC CHARACTERIZATION OF FRC MATERIALS
pp.：
36 – 46
THE INFLUENCE OF STEEL FIBRE CONTENT AND CURING CONDITIONS ON MECHANICAL PROPERTIES AND DEFORMABILITY OF REACTIVE POWDER CONCRETE AT BENDING
pp.：
46 – 56
INTERFACE BOND CHARACTERISTICS BETWEEN WOOD FIBRES AND A CEMENT MATRIX
pp.：
56 – 66
SHEAR STRENGTH AND DUCTILITY OF BEAMS REINFORCED WITH SYNTHETIC MACRO-FIBERS
pp.：
66 – 76
THE IMPACT OF AMOUNT AND LENGTH OF FIBRILLATED POLYPROPYLENE FIBRES ON THE PROPERTIES OF HPC EXPOSED TO HIGH TEMPERATURE
pp.：
76 – 84
ASSESSMENT BY LAW OF MIXTURES APPROACH OF INTERFACIAL ADHESION STRENGTH IN CELLULOSE-CEMENT COMPOSITES
pp.：
84 – 94
TENSILE FATIGUE RESPONSE OF SISAL FIBER REINFORCED CEMENT COMPOSITES
pp.：
94 – 104
INVESTIGATION ON THE STRENGTH AND FLEXURAL TOUGHNESS OF HYBRID FIBRE REINFORCED CONCRETE
pp.：
104 – 114
TEXTILE REINFORCED CONCRETE – DURABILITY ISSUES: CHANGES OF THE BOND AND TENSILE STRENGTH DUE TO AGEING
pp.：
114 – 124
IMPACT STUDY OF TEXTILE REINFORCED CEMENTITIOUS MATERIALS: TEST METHOD AND PRELIMINARY RESULTS
pp.：
124 – 134
THE DUCTILE BEHAVIOR OF HPFRCC IN COMPRESSION
pp.：
134 – 144
INVESTIGATION ON RANDOM DISTRIBUTION OF FIBRES IN CEMENT COMPOSITES
pp.：
144 – 152
PERMEABILITY OF SFRCC BASED ON FINE AGGREGATE AFTER PRE-LOAD CYCLES
pp.：
152 – 162
STATISTICAL OPTIMIZATION OF LOW SLUMP TERNARY CONCRETE MIXTURES WITH GROUND GRANULATED BLAST FURNACE SLAG (GGBS) AND HIGH CALCIUM FLY ASH FOR PAVEMENT APPLICATIONS
pp.：
162 – 174
DURABILITY PERFORMANCE OF ROLLER COMPACTED CONCRETE USING FLY ASH
pp.：
174 – 182
STRUCTURE AND PROPERTIES OF NAOH ACTIVATED CEMENT FREE BINDER (CFB) CONCRETES
pp.：
182 – 196
MODEL OF CONCRETE CARBONATION AS LIMITED PROCESS – EXPERIMENTAL INVESTIGATIONS OF FLUIDAL ASH CONCRETE
pp.：
196 – 208
MODIFICATION OF MINERAL BINDING MATRICES CARBON NANOSTRUCTURES
pp.：
208 – 214
MECHANICAL-ACOUSTIC AND STRUCTURAL STUDY OF DEGRADATION PROCESSES IN CORUNDUM CERAMICS AND ALUMINOUS PORCELAIN
pp.：
214 – 228
DESCRIPTIVE MICROSTRUCTURE AND FRACTURE SURFACE OBSERVATIONSOF FIRED VOLCANIC ASH
pp.：
228 – 230
DEHYDRATION, DEHYDROXYLATION, DENSIFICATION AND DEFORMATION DURING SINTERING OF GEOPOLYMERS BASED ON THE K2O-AL2O3-SIO2 SYSTEM
pp.：
230 – 232
MULTICRITERIAL OPTIMISATION OF AUTOCLAVED AERATED CONCRETE PROPERTIES AND EXPENDITURE OF ENERGY RESOURCES
pp.：
232 – 240
APPLICATION OF MACHINE LEARNING FOR PREDICTION OF CONCRETE RESISTANCE TO MIGRATION OF CHLORIDES
pp.：
240 – 250
CARBON SPHERES AS POSSIBLE MICRO-REINFORCEMENT OF CEMENT-BASED COMPOSITES
pp.：
250 – 258
PROPERTIES OF FIBER REINFORCED CEMENT COMPOSITES WITH CENOSPHERES FROM COAL ASH
pp.：
258 – 268
HOW TO GET RELIABLE 3D INFORMATION ON CONCRETE POROSITY?
pp.：
268 – 278
ANALYSIS OF THE INFLUENCE OF TYPE, AMOUNT AND WAY OF INTRODUCTION OF ANTI-FOAMING ADMIXTURE (AFA) ON THE PROPERTIES OF SELF-COMPACTING CONCRETE MIX
pp.：
278 – 288
PREDICTING THE ELASTIC MODULI OF ENHANCED POROSITY (PERVIOUS) CONCRETES USING RECONSTRUCTED 3D MATERIAL STRUCTURES
pp.：
288 – 304
ENHANCED DURABILITY OF CONCRETE BY SUPERABSORBENT POLYMERS
pp.：
304 – 314
VOLUMETRIC STABILITY OF CONCRETE USING RECYCLED CONCRETE AGGREGATES
pp.：
314 – 326
DAMAGE ASSESSMENT IN SECTIONS FOR DURABILITY PURPOSES: TWO ARGUMENTS NOT TO OPT FOR AUTOMATION
pp.：
326 – 336
THE EFFECTS OF LASER CLEANING PROCESS ON GEOMETRICAL MICROSTRUCTURE OF CEMENTITIOUS COMPOSITES
pp.：
336 – 348
ASSESSING THE REPEATABILITY OF THE RESTRAINED RING TEST
pp.：
348 – 360
PERFORMANCE EVALUATION OF RAPID-SETTING MATERIALS FOR CONCRETE PAVEMENT/BRIDGE DECK REPAIRS: LABORATORY AND FIELD PERSPECTIVES
pp.：
360 – 372
THE EFFECT OF TEMPERATURE ON THE RHEOLOGICAL PROPERTIES OF SELF-COMPACTING CONCRETE
pp.：
372 – 382
ASSESSMENT OF THE RHEOLOGICAL PROPERTIES OF CEMENT MIXES USING ELECTRICAL RESISTANCE
pp.：
382 – 392
EXPERIMENTAL TECHNIQUES FOR MULTI-SCALE CHARACTERIZATION OF MECHANICAL RESPONSE IN CEMENT-BASED MATERIALS
pp.：
392 – 404
INFLUENCE OF HYDROTHERMAL CURING ON MICRO STRUCTURE AND MECHANICAL PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE
pp.：
404 – 412
PATCHES IN CONCRETE: RECENT EXPERIMENTAL DISCOVERY OF A NATURAL PHENOMENON – SUPPORTING EVIDEDENCE BY DEM
pp.：
412 – 422
RELATIONSHIPS BETWEEN FRACTAL DIMENSION AND THE MECHANICAL AND STRUCTURAL PARAMETERS OF CONCRETES WITH BASALT AGGREGATE
pp.：
422 – 432
T-STRESS VALUES DURING FRACTURE IN WEDGE SPLITTING TEST GEOMETRIES: A NUMERICAL STUDY
pp.：
432 – 442
THE INFLUENCE OF AGGREGATE SIZE ON THE WIDTH OF FRACTURE PROCESS ZONE IN CONCRETE MEMBERS
pp.：
442 – 452
EFFECT OF STEEL STRIP GEOMETRY ON PULL-OUT STRENGTH OF AERATED CONCRETE
pp.：
452 – 462
INDEX OF CONTRIBUTORS
pp.：
462 – 464
SUBJECT INDEX: THE NUMBERS REFER TO THE OPENING PAGES OF THE RELEVANT PAPERS
pp.：
464 – 465
Brittle Matrix Composites 9
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
