Author: Bellet Michel Jaouen Olivier Poitrault Isabelle
Publisher: Emerald Group Publishing Ltd
ISSN: 0961-5539
Source: International Journal of Numerical Methods for Heat & Fluid Flow, Vol.15, Iss.2, 2005-02, pp. : 120-142
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Purpose - The present paper addresses the computer modelling of pipe formation in metal castings. Design/methodology/approach - As a preliminary, a brief review of the current state-of-the-art in pipe shrinkage computation is presented. Then, in first part, the constitutive equations that have to be considered in thermomechanical computations are presented, followed by the main lines of the mechanical finite element resolution. A detailed presentation of an original arbitrary Lagrangian-Eulerian (ALE) formulation is given, explaining the connection between the Lagrangian and the quasi Eulerian zones, and the treatment of free surfaces. Findings - Whereas most existing methods are based on thermal considerations only, it is demonstrated in the current paper that this typical evolution of the free surface, originated by shrinkage at solidification front and compensating feeding liquid flow, can be effectively approached by a thermomechanical finite element analysis. Research limitations/implications - Future work should deal with the following points: identification of thermo-physical and rheological data, automatic and adaptive mesh refinement, calculation of the coupled deformation of mold components, development of a two-phase solid/liquid formulation. Practical implications - An example of industrial application is given. The proposed method has been implemented in the commercial software THERCAST® dedicated to casting simulation. Originality/value - The proposed numerical methods provide a comprehensive approach, capable of modelling concurrently all the main phenomena participating in pipe formation.
Related content
The International Journal of Advanced Manufacturing Technology, Vol. 37, Iss. 1-2, 2008-04 ,pp. :
The Development of a Window for Stuck Pipe Prediction
By Shahbazi K. Shahri M. Pordel
Petroleum Science and Technology, Vol. 30, Iss. 2, 2012-01 ,pp. :