Monitoring of Occupational Exposure to Methylene Chloride: Sampling Protocol and Stability of Urine Samples

ISSN： 0146-4760

Source： Journal of Analytical Toxicology, Vol.29, Iss.8, 2005-11, pp. : 794-798

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

A sampling protocol for biomonitoring of the volatile solvent methylene chloride (MeCl₂) by analysis of urine from exposed workers was established. Storage temperature, sample volume in headspace vial (HSV), and time to sealing HSV on determination of MeCl₂ in urine were evaluated. MeCl₂ was analyzed by a solid-phase microextraction technique combined with gas chromatography. Volume of urine in HSV has no effect on MeCl₂ analysis. Delays of 30 and 60 min from collection of urine until sealing the HSV caused 14.47 ± 6.98% and 26.17 ± 9.57% decreases from baseline concentration, respectively. MeCl₂ concentration in spiked urine samples stored in sealed HSVs decreased on day 2 and then remained stable for 2 weeks. Refrigeration did not improve recovery although it seems to be associated with less variability. MeCl₂ in urine samples of seven exposed workers was in the range of 0.02–0.06 mg/L. Sampling of MeCl₂-containing urine should include collection of urine in closed plastic bottles, transfer to HSV within 15 min, sealing and clamping of HSV within 15 s, and storage of HSV in refrigeration until analysis, but no longer than 2 weeks. Standard samples should be prepared on the day of test sample collection and handled under the same conditions.