End-bearing capacity of driven piles in sand using the stress characteristics method: analysis and implementation

By Veiskarami Mehdi   Eslami Abolfazl   Kumar   Jyant  

Canadian Geotechnical Journal, Vol. 48, Iss. 10, 2011-10 ,pp. : 1570-1586

NRC Research Press

Access to resources Recommend Favorite

Cone penetration test (CPT) methods for end-bearing assessment of open- and closed-ended driven piles in siliceous sand

By Xu Xiangtao   Schneider James A.   Lehane Barry M.  

Canadian Geotechnical Journal, Vol. 45, Iss. 8, 2008-08 ,pp. : 1130-1141

NRC Research Press

Access to resources Recommend Favorite

Effect of spatial correlation of standard penetration test (SPT) data on bearing capacity of driven piles in sand

By Zhang Lianyang   Chen Jin-Jian  

Canadian Geotechnical Journal, Vol. 49, Iss. 4, 2012-04 ,pp. : 394-402

NRC Research Press

Access to resources Recommend Favorite

Incorporating setup into load and resistance factor design of driven piles in sand

By Yang Luo   Liang Robert  

Canadian Geotechnical Journal, Vol. 46, Iss. 3, 2009-03 ,pp. : 296-305

NRC Research Press

Access to resources Recommend Favorite

Reliability-based calibration of resistance factors for static bearing capacity of driven steel pipe piles

By Kwak Kiseok   Kim Kyung J.   Huh Jungwon   Lee Ju Hyung   Park Jae Hyun  

Canadian Geotechnical Journal, Vol. 47, Iss. 5, 2010-05 ,pp. : 528-538

NRC Research Press

Access to resources Recommend Favorite