Modeling of holes in close-fitting acoustical enclosures

Publisher： Institute of Noise Control Engineering

ISSN： 0736-2935

Source： INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol.1978, Iss.1, 1978-05, pp. : 337-342

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Three Methods for Predicting the Insertion Loss of Close-Fitting Acoustical Enclosures

By Tweed Lorne W. Tree David R.

Noise Control Engineering, Vol. 10, Iss. 2, 1978-03 ,pp. : 74-79

Institute of Noise Control Engineering

Access to resources Recommend Favorite

A model of close fitting acoustical enclosures

By Tweed Lorne W. Tree David R.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1977, Iss. 1, 1977-10 ,pp. : 319-330

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Tumbler Noise Reduction: The Close-Fitting Acoustical Enclosure

By Toothman Edwin H.

Noise Control Engineering, Vol. 14, Iss. 3, 1980-05 ,pp. : 143-145

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Sealed, Close-Fitting, Machine-Mounted Acoustic Enclosures with Predictable Performance

By Byrne K. P. Fischer H. M. Fuchs H. V.

Noise Control Engineering Journal, Vol. 31, Iss. 1, 1988-07 ,pp. : 7-15

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Evaluation and validation of numerical calculation methods for prediction of insertion loss of close-fitting engine enclosures

By Augusztinovicz F. Sas P.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1993, Iss. 5, 1993-08 ,pp. : 721-726

Institute of Noise Control Engineering

Access to resources Recommend Favorite