In-duct pressure measurements to determine sound generation, characteristic reflection and transmission factors of an air moving device in air-flow

By Terao Michihito   Sekine Hidehisa  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1989, Iss. 3, 1989-12 ,pp. : 143-146

Institute of Noise Control Engineering

Access to resources Recommend Favorite

The influence of agglutinated wood chips on the insertion loss of splitter attenuators

By Balint Jamilla   Graber Gerhard   Hahn Herbert   Moczon Michael  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 250, Iss. 4, 2015-08 ,pp. : 3304-3310

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Acoustic performance of a splitter duct silencer with zigzag airways

By Terao M   Sekine H   Itoh M  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1999, Iss. 3, 1999-12 ,pp. : 579-582

Institute of Noise Control Engineering

Access to resources Recommend Favorite

The tight-coupled monopole (TCM) and tandem (TCT) attenuators in a duct

By Hong W.K.W.   Eghtesadi Kh.   Leventhall H.G.  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1983, Iss. 3, 1983-07 ,pp. : 439-442

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Measurement of material properties and power reflection and transmission coefficients at high frequency on a T-beam structure

By Ungelnieks Robert J   Bernhard Robert J  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1996, Iss. 1, 1996-09 ,pp. : 711-716

Institute of Noise Control Engineering

Access to resources Recommend Favorite