Determining underground roof bolting machine operators noise exposure using laboratory results

By Matetic R.J.   Kovalchik Peter   Cole Gregory   Peterson Jeffrey   Pend Syd  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2007, Iss. 1, 2007-10 ,pp. : 1567-1576

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Noise and vibration assessment of a roof bolting machine

By Yantek David S.   Camargo Hugo E.   Jurovcik Paul  

Noise Control Engineering Journal, Vol. 58, Iss. 6, 2010-11 ,pp. : 601-610

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Laboratory evaluations of a 25-mm drill bit isolator to reduce noise from roof bolting machines in underground coal mines

By Azman Amanda S.   Alcorn Lynn   Li Mingfeng  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 250, Iss. 3, 2015-08 ,pp. : 3432-3441

Institute of Noise Control Engineering

Access to resources Recommend Favorite

A noise control for a roof bolting machine: Collapsible drill steel enclosure

By Matetic Rudy J.   Kovalchik Peter G.   Peterson J. Shawn   Alcorn Lynn A.  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2008, Iss. 1, 2008-07 ,pp. : 1439-1445

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Application of a microphone phased array to identify noise sources on a roof bolting machine

By Yantek David S.   Peterson J. Shawn   Smith Adam K.  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2007, Iss. 1, 2007-10 ,pp. : 150-161

Institute of Noise Control Engineering

Access to resources Recommend Favorite