Author: Zenkovets G. Tanashev Yu. Danilevich V. Tsybulya S. Gavrilov V. Shutilov A. Parmon V.
Publisher: MAIK Nauka/Interperiodica
ISSN: 0023-1584
Source: Kinetics and Catalysis, Vol.51, Iss.3, 2010-06, pp. : 444-448
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The physicochemical properties of titania (anatase) prepared from hydrated titanium dioxide by centrifugal thermal activation (CTA) at 140–700°C were studied. It was found that the microstructure and the texture parameters of anatase prepared by the above method were considerably different from those of the samples prepared by the traditional thermal decomposition of titanium hydroxide. The conditions of centrifugal activation exerted a considerable effect on the structure and the texture parameters of the resulting anatase. The crystal structure of anatase prepared at a temperature lower than 650°C was imperfect, and it approached a regular structure only at a temperature of >650°C. At temperatures higher than 300°C, the samples of TiO2 prepared using CTA were characterized by higher specific surface areas, fine pore structures, and comparable mesopore volumes, as compared with the samples prepared by commonly used synthetic methods.
Related content
By Campostrini R. Ischia M. Palmisano L.
Journal of Thermal Analysis and Calorimetry, Vol. 71, Iss. 3, 2003-03 ,pp. :
By Campostrini R. Ischia M. Palmisano L.
Journal of Thermal Analysis and Calorimetry, Vol. 75, Iss. 1, 2004-01 ,pp. :
By Campostrini R. Ischia M. Palmisano L.
Journal of Thermal Analysis and Calorimetry, Vol. 75, Iss. 1, 2004-01 ,pp. :
By Campostrini R. Ischia M. Palmisano L.
Journal of Thermal Analysis and Calorimetry, Vol. 71, Iss. 3, 2003-03 ,pp. :