Author: Viswanathan A. Sastikumar D. Kamachimudali U. Kumar Harish Nath A. K.
Publisher: Maney Publishing
ISSN: 1743-2944
Source: Surface Engineering, Vol.23, Iss.2, 2007-03, pp. : 123-128
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Al–Si alloy was laser surface treated with various compositions of TiC and Ni under different laser processing parameters to produce a TiC reinforced composite layer on it. The study shows that TiC composite layer is formed when the composition is 75TiC–25Ni (wt-%) and laser power 2·5 kW and scan speed 0·2 m min−1. The layer exhibited an average microhardness of ∼750 HV, which is free from pores as well as cracks and contained TiC and Al–Si phases distributed in the Ni–Al matrix. Mechanical strength of layer is studied by the hardness test.