Final Report: A dc reference standard with 1.018 V and 10 V output and two standard resistors of 10 Ω and 10 kΩ

Author：  

Publisher： IOP Publishing

ISSN： 0026-1394

Source： Metrologia, Vol.38, Iss.3, 2001-06, pp. : 281-283

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

200 kΩ ac resistance transfer standard

By Coogan P. C.   Darlow J. M.   Fiander J. R.   Small G. W.  

Metrologia, Vol. 38, Iss. 6, 2002-01 ,pp. : 503-507

IOP Publishing

Access to resources Recommend Favorite

Bilateral comparison of 1 Ω, 10 kΩ and 100 MΩ resistance standards between the PTB and the UME

By Orhan D. Atesalp   Sakarya H.   Schumacher B.  

Metrologia, Vol. 37, Iss. 4, 2000-10 ,pp. : 341-344

IOP Publishing

Access to resources Recommend Favorite

A 10 V programmable Josephson voltage standard and its applications for voltage metrology

By Tang Y.   Ojha V.N.   Schlamminger S.   Rüfenacht A.   Burroughs C.J.   Dresselhaus P.D.   Benz S.P.  

Metrologia, Vol. 49, Iss. 6, 2012-12 ,pp. : 635-643

IOP Publishing

Access to resources Recommend Favorite

A new primary standard oil manometer for absolute pressure up to 10 kPa

By  

Metrologia, Vol. 52, Iss. 1, 2015-02 ,pp. : 111-120

IOP Publishing

Access to resources Recommend Favorite

EUROMET Project 432: Frequency performance of 12 906 Ω and 6453 Ω reference resistors for ac quantum Hall effect experiments

By Boháček J.  

Metrologia, Vol. 39, Iss. 2, 2002-04 ,pp. : 231-237

IOP Publishing

Access to resources Recommend Favorite