Development of elastomeric isolators to reduce roof bolting machine drilling noise

By Michael Robert   Yantek David   Johnson David   Ferro Ernie   Swope Chad  

Noise Control Engineering Journal, Vol. 59, Iss. 6, 2011-11 ,pp. : 591-612

Institute of Noise Control Engineering

Access to resources Recommend Favorite

The development of a damped drill steel to reduce roof bolting machine drilling noise

By Peterson J. Shawn   Camargo Hugo  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2010, Iss. 1, 2010-04 ,pp. : 1287-1297

Institute of Noise Control Engineering

Access to resources Recommend Favorite

A control suite to reduce roof bolting machine drilling noise

By Lowe M. Jenae   Peterson J. Shawn   Yantek David S.   Alcorn Lynn A.   Michael Robert  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2010, Iss. 1, 2010-04 ,pp. : 1373-1384

Institute of Noise Control Engineering

Access to resources Recommend Favorite

A noise control for a roof bolting machine: Collapsible drill steel enclosure

By Matetic Rudy J.   Kovalchik Peter G.   Peterson J. Shawn   Alcorn Lynn A.  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2008, Iss. 1, 2008-07 ,pp. : 1439-1445

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Laboratory evaluations of a 25-mm drill bit isolator to reduce noise from roof bolting machines in underground coal mines

By Azman Amanda S.   Alcorn Lynn   Li Mingfeng  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 250, Iss. 3, 2015-08 ,pp. : 3432-3441

Institute of Noise Control Engineering

Access to resources Recommend Favorite