Mechanical properties of copper to titanium joined by friction welding

Author： Kim S-Y. Jung S-B. Shur C-C. Yeon Y-M. Kim D-U.

ISSN： 0022-2461

Source： Journal of Materials Science, Vol.38, Iss.6, 2003-03, pp. : 1281-1287

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Mechanical response of 2024-7075 aluminium alloys joined by Friction Stir Welding

By Cavaliere P. Cerri E. Squillace A.

Journal of Materials Science, Vol. 40, Iss. 14, 2005-07 ,pp. : 3669-3676

Springer Publishing Company

Access to resources Recommend Favorite

Microstructure and mechanical properties of friction stir welded copper

By Sakthivel T. Mukhopadhyay J.

Journal of Materials Science, Vol. 42, Iss. 19, 2007-10 ,pp. : 8126-8129

Springer Publishing Company

Access to resources Recommend Favorite

Heterogeneous Friction Stir Welding: Improved Properties in Dissimilar Aluminum Alloy Joints through Insertion of Copper Coupled with External Heating

By Kandasamy J.

Materials and Manufacturing Processes, Vol. 27, Iss. 12, 2012-12 ,pp. : 1429-1436

Taylor & Francis Ltd

Access to resources Recommend Favorite

The mechanical properties related to the dominant microstructure in the weld zone of dissimilar formed Al alloy joints by friction stir welding

By Lee W. B. Yeon Y. M. Jung S. B.

Journal of Materials Science, Vol. 38, Iss. 20, 2003-10 ,pp. : 4183-4191

Springer Publishing Company

Access to resources Recommend Favorite

The Influence of Cu/Ti Overlapping Region Microstructures on the Mechanical Tensile Properties of the Joint via Friction Stir Lap Welding

Advanced Materials Research, Vol. 2017, Iss. 1142, 2017-02 ,pp. : 260-264

Trans Tech Publications

Access to resources Recommend Favorite