Author： El-Magd Essam Gebhard Jürgen Stuhrmann Jan
Publisher： Springer Publishing Company
ISSN： 0022-2461
Source： Journal of Materials Science, Vol.42, Iss.14, 2007-07, pp. : 5666-5670
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In order to characterise the mechanical behaviour of sandwich structures, which combine an interlayer of a woven wire mesh between two thin walled sheet metals, creep tests at 650, 680 and 750 °C were carried out on sheet metals made of the nickel based alloy Nicrofer 6025 HT (2.4633). In addition to the tests the creep behaviour was simulated by a model, which considers the creep rate as a function of the applied stress σ and the internal deformation resistance including an internal back stress σi and a particle resistance σP. The damage is included by a damage parameter D, which converges to “one” with increasing damage. A concluding comparison with the creep test results shows that the model is able to describe the creep behaviour of the investigated sheet metals.
Related content
Access to resources
Recommend
Effect of Pack Cementation Temperature on Oxidation Behavior of NiCoCrAl Coated Layer
Advanced Materials Research, Vol. 2015, Iss. 1112, 2015-08 ,pp. :