Author: Dykhuizen R. Neiser R.
Publisher: Springer Publishing Company
ISSN: 1059-9630
Source: Journal of Thermal Spray Technology, Vol.15, Iss.3, 2006-09, pp. : 332-339
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Quality control of a thermal spray system manufacturing process is difficult due to the many input variables that need to be controlled. Great care must be taken to ensure that the process remains constant to obtain a consistent quality of the parts. Control is greatly complicated by the fact that measurement of particle velocities and temperatures is a noisy stochastic process. This article illustrates the application of quality control concepts to a wire flame spray process. A central feature of the real-time control system is an automatic feedback control scheme that provides fine adjustments to ensure that uncontrolled variations are accommodated. It is shown how the control vectors can be constructed from simple process maps to independently control particle velocity and temperature. This control scheme is shown to perform well in a real production environment. We also demonstrate that slight variations in the feed wire curvature can greatly influence the process. Finally, the geometry of the spray system and sensor must remain constant for the best reproducibility.
Related content
Advances in modeling of the thermal spray process
By Pfender E.
Journal of Thermal Spray Technology, Vol. 6, Iss. 2, 1997-06 ,pp. :