Fabrication of Al-3 Wt pct Mg matrix composites reinforced with Al₂O₃ and SiC particulates by the pressureless infiltration technique

By Lee Kon   Kim Youn   Kwon Hoon  

Metallurgical and Materials Transactions A, Vol. 29, Iss. 12, 1998-12 ,pp. : 3087-3095

Springer Publishing Company

Access to resources Recommend Favorite

Microstructure Characterization and Creep Deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu Nanocomposite

By Hayes R.W.   Berbon P.B.   Mishra R.S.  

Metallurgical and Materials Transactions A, Vol. 35, Iss. 12, 2004-12 ,pp. : 3855-3861

Springer Publishing Company

Access to resources Recommend Favorite

Phosphorus Partition between Liquid Steel and CaO-SiO₂-FeO _x -P₂O₅-MgO Slag Containing 15 to 25 Pct FeO

By Basu Somnath   Lahiri Ashok   Seetharaman Seshadri  

Metallurgical and Materials Transactions B, Vol. 38, Iss. 4, 2007-08 ,pp. : 623-630

Springer Publishing Company

Access to resources Recommend Favorite

Interfacial Reaction Between CaO-SiO 2 -MgO-Al 2 O 3 Flux and Fe- x Mn- y Al ( x = 10 and 20 mass pct, y = 1, 3, and 6 mass pct) Steel at 1873 K (1600 °C)

By Kim Dong  

Metallurgical and Materials Transactions B, Vol. 43, Iss. 4, 2012-08 ,pp. : 875-886

Springer Publishing Company

Access to resources Recommend Favorite

Effect of Mg and Sr additions on the formation of intermetallics in Al-6 Wt pct Si-3.5 Wt pct Cu-(0.45) to (0.8) Wt pct Fe 319-type alloys

By Samuel F.   Samuel A.   Ouellet P.   Doty H.  

Metallurgical and Materials Transactions A, Vol. 29, Iss. 12, 1998-12 ,pp. : 2871-2884

Springer Publishing Company

Access to resources Recommend Favorite