Influence of the stress, strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

By Muñoz-Escalona Patricia   Melkote Shreyes   Liu Kai  

Journal of Materials Engineering and Performance, Vol. 14, Iss. 5, 2005-10 ,pp. : 582-590

Springer Publishing Company

Access to resources Recommend Favorite

The Evolution of Grain Boundary Character during Superplastic Deformation of an Al-6 Pct Cu-0.4 Pct Zr Alloy

By Eddahbi M.   McNelley T.R.   Ruano O.A.  

Metallurgical and Materials Transactions A, Vol. 32, Iss. 5, 2001-05 ,pp. : 1093-1102

Springer Publishing Company

Access to resources Recommend Favorite

Microtexture evolution during annealing and superplastic deformation of Al-5 pct Ca-5 pct Zn

By Pérez-Prado M.   Ruano O.   González-Doncel G.   McNelley T.  

Metallurgical and Materials Transactions A, Vol. 29, Iss. 2, 1998-02 ,pp. : 485-492

Springer Publishing Company

Access to resources Recommend Favorite

The microstructural development of Mg-9 pct Al-1 pct Zn alloy during injection molding

By Czerwinski F.  

Metallurgical and Materials Transactions A, Vol. 33, Iss. 9, 2002-09 ,pp. : 2963-2972

Springer Publishing Company

Access to resources Recommend Favorite

The Effect of Fe-Rich Intermetallics on the Weibull Distribution of Tensile Properties in a Cast Al-5 Pct Si-3 Pct Cu-1 Pct Fe-0.3 Pct Mg Alloy

By Zahedi H.   Emamy M.   Razaghian A.   Mahta M.   Campbell J.   Tiryakioğlu M.  

Metallurgical and Materials Transactions A, Vol. 38, Iss. 3, 2007-03 ,pp. : 659-670

Springer Publishing Company

Access to resources Recommend Favorite