Study of precipitation kinetics in a super purity Al-0.8 pct Mg-0.9 pct Si alloy using differential scanning calorimetry

By Gupta A.   Lloyd D.  

Metallurgical and Materials Transactions A, Vol. 30, Iss. 3, 1999-03 ,pp. : 879-884

Springer Publishing Company

Access to resources Recommend Favorite

Role of cold work and SiC reinforcements on the β′/β precipitation in Al-10 pct Mg alloy

By Bhargava N.   Samajdar I.   Ranganathan S.   Surappa M.  

Metallurgical and Materials Transactions A, Vol. 29, Iss. 11, 1998-11 ,pp. : 2835-2842

Springer Publishing Company

Access to resources Recommend Favorite

Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy

By Chang C.  

Metallurgical and Materials Transactions A, Vol. 42, Iss. 7, 2011-07 ,pp. : 1960-1964

Springer Publishing Company

Access to resources Recommend Favorite

Quench Sensitivity of an Al-7 Pct Si-0.6 Pct Mg Alloy: Characterization and Modeling

By Tiryakioğlu Murat   Shuey Ralph  

Metallurgical and Materials Transactions B, Vol. 38, Iss. 4, 2007-08 ,pp. : 575-582

Springer Publishing Company

Access to resources Recommend Favorite

The Effect of Fe-Rich Intermetallics on the Weibull Distribution of Tensile Properties in a Cast Al-5 Pct Si-3 Pct Cu-1 Pct Fe-0.3 Pct Mg Alloy

By Zahedi H.   Emamy M.   Razaghian A.   Mahta M.   Campbell J.   Tiryakioğlu M.  

Metallurgical and Materials Transactions A, Vol. 38, Iss. 3, 2007-03 ,pp. : 659-670

Springer Publishing Company

Access to resources Recommend Favorite