High strain rate torsional behavior of an ultrahigh carbon steel (1.8 Pct C-1.6 Pct Al) at elevated temperature

By Carsi Manuel   Ruano Oscar   Peñalba Felix   Sherby Qleg  

Metallurgical and Materials Transactions A, Vol. 28, Iss. 9, 1997-09 ,pp. : 1913-1920

Springer Publishing Company

Access to resources Recommend Favorite

Interfacial Reaction Between CaO-SiO 2 -MgO-Al 2 O 3 Flux and Fe- x Mn- y Al ( x = 10 and 20 mass pct, y = 1, 3, and 6 mass pct) Steel at 1873 K (1600 °C)

By Kim Dong  

Metallurgical and Materials Transactions B, Vol. 43, Iss. 4, 2012-08 ,pp. : 875-886

Springer Publishing Company

Access to resources Recommend Favorite

Dimensional Anisotropy in 18 Pct Ni Maraging Steel

By Farooque M.   Qaisar S.   Ul Haq A.   Khan A.Q.  

Metallurgical and Materials Transactions A, Vol. 32, Iss. 5, 2001-05 ,pp. : 1057-1061

Springer Publishing Company

Access to resources Recommend Favorite

Effects of Heat Treatment and Alloying Elements on the Microstructures and Mechanical Properties of 0.15 Wt Pct C Transformation-Induced Plasticity–Aided Cold-Rolled Steel Sheets

By Kim Sung-Joon   Lee Chang Gil   Choi Ildong   Lee Sunghak  

Metallurgical and Materials Transactions A, Vol. 32, Iss. 3, 2001-03 ,pp. : 505-514

Springer Publishing Company

Access to resources Recommend Favorite

Quench Sensitivity of an Al-7 Pct Si-0.6 Pct Mg Alloy: Characterization and Modeling

By Tiryakioğlu Murat   Shuey Ralph  

Metallurgical and Materials Transactions B, Vol. 38, Iss. 4, 2007-08 ,pp. : 575-582

Springer Publishing Company

Access to resources Recommend Favorite