Abstract
Purpose– Cosserat continuum models are motivated by modeling size effects in materials with micro-structure. While elastic Cosserat continuum models can reproduce size effects in deformation stiffness, inelastic models are often used to capture localization and post failure behavior of materials. In application of inelastic Cosserat models, parameter determination is a difficult issue not fully addressed. The purpose of this paper is to discuss parameter-related characteristic lengths in Cosserat continuum modeling of granular materials.Design/methodology/approach– Based on a Cosserat continuum extension of a hypoplastic model for granular media, interpretation of additional parameters are sought through analysis of simple one-dimensional shear. Governing equations are obtained, respectively, for small strain shear formation and for stead flow state in localized zone.Findings– Two characteristic lengths are obtained analytically for granular materials: one governs the size effect near boundaries in shear deformation, the other scales the thickness of shear band in failure. While both characteristic lengths are proportional to the micro-structure length (the mean grain diameter), the former is related to the micro-stiffness parameter, and the latter depends on the micro-strength parameter. The results reveal a connection between size effects, the micro-structure length and the material properties. The work also provides a new perspective to inelastic Cosserat continuum models, as well as a possible way for determination micro-deformation and strength parameters.Originality/value– The results reveal a connection between size effects, the micro-structure length and the material properties. The work provides a new perspective and an interpretation to the micro-deformation and strength parameters of inelastic Cosserat continuum models, as well as a possible way for determination of these parameters.