Compatibilization of polyethylene/polyamide 6 blend nanocomposite films

Publisher： John Wiley & Sons Inc

E-ISSN： 1548-0569|36|6|992-998

ISSN： 0272-8397

Source： POLYMER COMPOSITES, Vol.36, Iss.6, 2015-06, pp. : 992-998

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Effect of uniaxial stretching on thermal, oxygen barrier, and mechanical properties of polyamide 6 and poly(m‐xylene adipamide) nanocomposite films

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 5, 2015-05 ,pp. : 1113-1127

John Wiley & Sons Inc

Access to resources Recommend Favorite

Assessment of compatibilization efficiency of SEBS in the PP/PS blend

By  

JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 135, Iss. 18, 2018-05 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

Mechanical and barrier properties of ternary nanocomposite films based on polycarbonate/amorphous polyamide blends modified with a nanoclay

By  

POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 26, Iss. 6, 2015-06 ,pp. : 665-673

John Wiley & Sons Inc

Access to resources Recommend Favorite

Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers

By Palabiyik M.   Bahadur S.  

Wear, Vol. 253, Iss. 3, 2002-08 ,pp. : 369-376

Elsevier

Access to resources Recommend Favorite

Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer

By Palabiyik M.   Bahadur S.  

Wear, Vol. 246, Iss. 1, 2000-11 ,pp. : 149-158

Elsevier

Access to resources Recommend Favorite