Membrane Electrode Assembly with Ultra Low Platinum Loading for Cathode Electrode of PEM Fuel Cell by Using Sputter Deposition

Publisher： John Wiley & Sons Inc

E-ISSN： 1615-6854|15|2|288-297

ISSN： 1615-6846

Source： FUEL CELLS (ELECTRONIC), Vol.15, Iss.2, 2015-04, pp. : 288-297

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Microfluidic direct methanol fu

By  

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol. 39, Iss. 10, 2015-08 ,pp. : 1430-1436

John Wiley & Sons Inc

Access to resources Recommend Favorite

Evaluation of Low‐Cost Separators for Increased Power Generation in Single Chamber Microbial Fuel Cells with Membrane Electrode Assembly

By  

FUEL CELLS (ELECTRONIC), Vol. 15, Iss. 1, 2015-02 ,pp. : 230-238

John Wiley & Sons Inc

Access to resources Recommend Favorite

Tailoring the Membrane‐Electrode Interface in PEM Fuel Cells: A Review and Perspective on Novel Engineering Approaches

By  

ADVANCED ENERGY MATERIALS (ELECTRONIC), Vol. 8, Iss. 4, 2018-02 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

Performance Improvement by Temperature Control of an Open‐Cathode PEM Fuel Cell System

By  

FUEL CELLS (ELECTRONIC), Vol. 14, Iss. 3, 2014-06 ,pp. : 466-478

John Wiley & Sons Inc

Access to resources Recommend Favorite

Correlation of the electrochemical reversibility and resolution of the anode and cathode peaks of the electrode processes of hydroquinone and metol on graphite and platinum

By Kiryushov V.   Aleksandrova T.   Skvortsova L.   Vais A.  

Journal of Analytical Chemistry, Vol. 66, Iss. 2, 2011-02 ,pp. : 201-206

MAIK Nauka/Interperiodica

Access to resources Recommend Favorite