Chapter
Influence of the Magnetic Anisotropy on Electrical Machines
Analysis of Structural Deformation and Vibration of Electrical Steel Sheet by Using Magnetic Property of Magnetostriction
Rapid Design of Sandwich Windings Transformers for Stray Loss Reduction
Application of Logarithmic Potential to Electromagnetic Field Calculation in Convex Bars
Multi-Frequency Sensitivity Analysis of 3D Models Utilizing Impedance Boundary Condition with Scalar Magnetic Potential
Very Fast and Easy to Compute Analytical Model of the Magnetic Field in Induction Machines with Distributed Windings
Coupling Thermal Radiation to an Inductive Heating Computation
Consideration of Coupling Between Electromagnetic and Thermal Fields in Electrodynamic Computation of Heavy-Current Electric Equipment
Force Computation with the Integral Equation Method
Chapter B. Computer Methods in Applied Electromagnetism
Numerical Simulation of Non-Linear Electromagnet Coupled with Circuit to Rise up the Coil Current
Numerical Calculation of Power Losses and Short-Circuit Forces in Isolated-Phase Generator Busbar
Numerical Methods for Calculation of Eddy Current Losses in Permanent Magnets of Synchronous Machines
3-D Finite Element Analysis of Interior Permanent Magnet Motors with Stepwise Skewed Rotor
Advance Computer Techniques in Modelling of High-Speed Induction Motor
Computation of the Equivalent Characteristics of Anisotropic Laminated Magnetic Cores
Improving Solution Time in Obtaining 3D Electric Fields Emanated from High Voltage Power Lines
Thermal Distribution Evaluation Directly from the Electromagnetic Field Finite Elements Analysis
Coordination of Surge Protective Devices Using “Spice” Student Version
B2. Numerical Models of Devices
Nonlinear Electromagnetic Transient Analysis of Special Transformers
Some Methods to Evaluate Leakage Inductances of a Claw Pole Machine
Reduction of Cogging Torque in Permanent Magnet Motors Combining Rotor Design Techniques
Optimum Design of Linear Motor for Weight Reduction Using Response Surface Methodology
Analytical Evaluation of Flux-Linkages and Electromotive Forces in Synchronous Machines Considering Slotting, Saliency and Saturation Effects
Radiation in Modeling of Induction Heating Systems
Time-Domain Analysis of Self-Complementary and Interleaved Log-Periodic Antennas
New Spherical Resonant Actuator
C1. Electrical Machines and Transformers
Influence of the Correlated Location of Cores of TPZ Class Protective Current Transformers on Their Transient State Parameters
Machine with a Rotor Structure Supported Only by Buried Magnets
FEM Study of the Rotor Slot Design Influences on the Induction Machine Characteristics
Concentrated Wound Permanent Magnet Motors with Different Pole Pair Numbers
Air-Gap Magnetic Field of the Unsaturated Slotted Electric Machines
Dynamic Simulation of the Transverse Flux Reluctance Linear Motor for Drive Systems
Influence of Air Gap Diameter to the Performance of Concentrated Wound Permanent Magnet Motors
Squirrel-Cage Induction Motor with Intercalated Rotor Slots of Different Geometries
Analysis and Performance of a Hybrid Excitation Single-Phase Synchronous Generator
Numerical Calculation of Eddy Current Losses in Permanent Magnets of BLDC Machine
Analysis of High Frequency Power Transformer Windings for Leakage Inductance Calculation
Influence of the Stator Slot Opening Configuration on the Performance of an Axial-Flux Induction Motor
Characteristics of Special Linear Induction Motor for LRV
Electromagnetic Computations in the End Zone of Power Turbogenerator
C2. Actuators and Special Devices
The Impact of Magnetic Circuit Saturation on Properties of Specially Designed Induction Motor for Polymerization Reactor
Electromagnetic Design of Variable-Reluctance Transducer for Linear Position Sensing
The Influence of the Matrix Movement in a High Gradient Magnetic Filter on the Critical Temperature Distribution in the Superconducting Coil
Macro- and Microscopic Approach to the Problem of Distribution of Magnetic Field in the Working Space of the Separator
Electric Field Exposure Near the Poles of a MV Line
Study on High Efficiency Swithced Reluctance Drive for Centrifugal Pumping System
Power Quality Effects on Ferroresonance
FEM Computation of Flashover Condition for a Sphere Spark Gap and for a Special Three-Electrode Spark Gap Design
Recent Developments in Magnetic Sensing
Modelling of Open Magnetic Shields’ Operation to Limit Magnetic Field of High-Current Lines
Selected Problems of the Flux Pinning in HTc Superconductors
The Effect of the Direction of Incident Light on the Frequency Response of p-i-n Photodiodes
3-D Finite Element Mesh Optimization Based on a Bacterial Chemotaxis Algorithm
Electro-Quasistatic High Voltage Field Simulation of Large Scale 3D Insulator Structures Including 2D Models for Conductive Pollution Layers
Electromagnetic Aspects of Data Transmission
Application of the Magnetic Field Distribution in Diagnostic Method of Special Construction Wheel Traction Motors
Advanced Computer Techniques in Applied Electromagnetics
( Studies in Applied Electromagnetics and Mechanics )
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
