Related content

Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide

By Liu Nun-Ming   Chiang Ko-Ta   Horng Jenn-Tsong   Chen Chih-Cherng  

The International Journal of Advanced Manufacturing Technology, Vol. 51, Iss. 5-8, 2010-11 ,pp. : 587-598

Springer Publishing Company

Access to resources Recommend Favorite

Development of an inversion model for establishing EDM input parameters to satisfy material removal rate, electrode wear ratio and surface roughness

By Sánchez Horacio  

The International Journal of Advanced Manufacturing Technology, Vol. 57, Iss. 1-4, 2011-11 ,pp. : 189-201

Springer Publishing Company

Access to resources Recommend Favorite

Effects of the impact angle variations on the erosion rate of glass in powder blasting process

By Park Dong   Cho Myeong-Woo   Lee Honghee  

The International Journal of Advanced Manufacturing Technology, Vol. 23, Iss. 5-6, 2004-03 ,pp. : 444-450

Springer Publishing Company

Access to resources Recommend Favorite

Modeling and analysis of electrode wear and white layer thickness in die-sinking EDM process through response surface methodology

By Çaydaş Ulaş   Hasçalik Ahmet  

The International Journal of Advanced Manufacturing Technology, Vol. 38, Iss. 11-12, 2008-10 ,pp. : 1148-1156

Springer Publishing Company

Access to resources Recommend Favorite

Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al₂O₃+TiC mixed ceramic

By Chiang Ko-Ta  

The International Journal of Advanced Manufacturing Technology, Vol. 37, Iss. 5-6, 2008-05 ,pp. : 523-533

Springer Publishing Company

Access to resources Recommend Favorite