Chapter
An Inquisitive into the Indirect Measurement and Comparison of the Viscosity of Nanoconfined Polystyrene Nanoparticles
Effect of Grain Size and Load Ratio on the near Threshold Stress Intensity Factor during Fatigue Crack Propagation of Dual Phase Steel
Cerium Doped Bismuth Based High Tc Superconductor: Synthesis and Study of Superconducting Properties
Tempering Response to Different Morphologies of Martensite in Tensile Deformation of Dual-Phase Steel
Effects on Structural, Electronic Transport & Optical Properties of Doped & Undoped ZnTe Thin Films for CdTe/CdS Solar Cells
The Effect of Double Pass GMAW Process on Microstructure and Mechanical Properties of Aa 6061-T6 Joining Plates
Martensitic Transformation and Microstructural Characteristics in Copper Based Shape Memory Alloys
Effect of Ageing on Mechanical and Shape Memory Properties of Ti-5Cr-4Ag Alloy
A Hierarchical Approach to Purify and Functionalize Pristine Carbon Nanotubes
Synthesis of Single and Multi Walled Carbon Nanotubes by Improved Arc Discharge Method
Effect of Substrate Temperature on the Structural and Electrical Properties of MBE Grown ZnO
Synthesis, Crystallization Behavior and Surface Modification of Ni-Cr-Si-Fe Amorphous Alloy
Acoustic Properties of Ho2Si2O7 Single Crystal Investigated by Brillouin Light Scattering
Liner Material's Output Characteristics of Explosively Formed Projectiles (EFPs)
Characterization of Physical Properties of Thermally Evaporated Doped CdS Thin Films for Photovoltaics
Effect of Sintering Temperature on Structural, Electrical and Dielectric Parameters of Mn-Zn Nano Ferrites
Synthesis and Thermoelectric Studies in Cr Doped Cobalt Ferrites Nano Particles
Optoelectronic Properties of Cadmium Sulfide Thin Films Deposited by Thermal Evaporation Technique
Synthesis, Characterization and Hall Effect Measurements of Nanocrystalline ZnO Thin Films
Electrical and Dielectric Spectroscopic Characterization of Polycrystalline Dy2Si2O7
Role of Synthesis Parameters on Structural and Electrical Properties of M-Type Hexa-Ferrites
Failure of the Pressure Bulkhead of a Passenger Aircraft - A Case Study
Effect of Heat Treatment on Deformation Induced Martensite in Austenitic Stainless Steel
Microstructures, Electrical and Magnetic Properties of Zn Doped Co Nanoferrites
Investigation of Source of N-Type Conductivity in Bulk ZnO
Study of Corrosion-Electrochemical Behavior of Aluminum-Beryllium Alloys Alloyed with Yttrium, Lanthanum and Cerium
Effect of Zirconium Addition on the Grain Size and Mechanical Behavior of Aluminum Grain Refined by Titanium Plus Boron (Ti+B) in the as Cast and Cold Extruded Conditions
Preparation, Structural and Electrical Properties of Nanocrystalline Zr-Mn Cobalt-Ferrite Synthesized by the Co-Precipitation Method
Structural and Thermal Characterization of Polymorphic Er2Si2O7
Laser Induced Backside Dry Etching of BK-7 and Quartz in Vacuum
Comparative Study of Temperature Dependent Barrier Heights of Pd/ZnO Schottky Diodes Grown along Zn- and O-Faces
Preparation and Characterization of Carbon Supported Nano-Nickel and its Sorption Behavior for Zinc from Aqueous Solutions
Effect of Cork Loading on Mechanical and Thermal Properties of Silica-Ethylene-Propylene-Diene Monomer Composite
An Electrochemical Impedance Spectroscopy Study of Al-Zn and Al-Zn-Sn Alloys in Tropical Seawater
A Comparison of the Electrical and Thermal Behavior of ZrO2-Ni Interpenetrating Phase Composite Produced by Microwave and Conventional Sintering
Electrical, Dielectrical and Magnetic Properties of Zr-Mn Doped Nano-Ferrites
Isotropic and Anisotropic Nanocrystalline NdFeB-Based Magnets Prepared by Spark Plasma Sintering and Hot Deformation
Single Step Heat Treatment Cycle for Development of Isotropic Fe-Cr-Co Magnets
Influence of Contact Materials on Phenomena in a Short Electrical Arc
Anomalous Behavior of Chemically Synthesized Magnetoplumbite Strontium Ferrite Nano Particles
Effect of Thermal Treatments on the Structural and Optical Properties of Thermally Deposited Polycrystalline Cu Thin Films
Proficient Ni-Zn-Cr Ferrites: Synthesis and Characterization
Effect of Sintering Temperature on Nanostructured Multiferroic BiFeO3 Ceramics
Effect of Zirconium Addition on Welding of Aluminum Grain Refined by Titanium
Effect of Thermal Treatment on Nano-Crystallites and Phase Transformation of CaZrO3Thermal Barrier Coatings
Improved Hydrogen Desorption Kinetics of MgH2 Nanoparticles by Using TiC Nanocatalyst
Software Development for Specific Geometry and Safe Design of Isotropic Material Multicell Beams
Material Selection for Design, Manufacturing and Application
Role of Heat Treatment in Magnetic Properties of Fe-Co-Ni-Al-Cu-Ti Alloy
Failure Analysis of a Helicopter's Main Rotor Bearing
Combustion Characteristics of the Mustard Methyl Esters
Resistance Pressure Sensor Based on Ag/Cu2O-PEPC-NiPc/Al Composite
Role of Equiaxed Primary Alpha (α׳) and Mechanical Properties of Ti-6Al-4V Alloy
Comparison of Structural Properties of Thermally Evaporated CdTe Thin Films on Different Substrates
Effect of Strain Rate on Cavity Closure during Compression between Flat Platens Using Superplastic Tin-Lead Alloy
SEM Examination and Analysis of the Interface Character in Surface Modified Aramid-Epoxy Composite
Variations in Structural and Electrical Properties of Ba-Hexaferrite due to Pb Substitution
Synthesis of Phase Pure Strontium Doped Lead Zirconate Titanate Nano Crystalline Powder by Sol-Gel Approach
Non-Destructive Evaluation of Plasma Sprayed CaZrO3 Coatings by Eddy Current Technique
Effect of Post-Deposition Annealing Treatment on the Structural, Optical and Gas Sensing Properties of TiO2 Thin Films
Characterization of Cold Rolled Austenitic Stainless Steel by Ultrasonic Longitudinal Velocity
Effect of Vanadium Addition to Aluminum and Aluminum Grain Refined by Titanium on their Chemical Corrosion Rate in Acidic Solution, HCL, at Different Temperatures
Correlation of Microstructures with Electrical Transport Properties in Mn Doped Co Nanoferrite Particles
Synthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool Steel
Influence of Solid Particle Size on Burning and Mechanical Properties of AP/Al/HTPB Composites
Development of Fe-Cr-Co Permanent Magnets by Single Step Thermo-Magnetic Treatment
Failure Analysis of Engine Bearing
Piezoelectricity in 0-3 PZT-PVDF Nano Composites Prepared via a Modified Solution Casting Process
Synthesis and AC Electrical Characterization of Co Doped Bismuth Manganite Nanoparticles
Effect of Carbon Black on Curing Behavior, Mechanical Properties and Viscoelastic Behavior of Natural Sponge Rubber-Based Nano-Composites
Effect of Air Plasma Spraying Parameters on WC-Co Cermet Coating
Plasma Sprayed Alumina Coating on Ti6Al4V Alloy for Orthopaedic Implants: Microstructure and Phase Analysis
Influence of Degree of Deformation on Anisotropy in Mechanical Properties in Wrought Magnesium Alloy ZK60
Design of Axially Loaded Helical Spring Isolation Systems
Comparative Performance of Locally Made and the Foreign Made Dynamic Compression Plates
Investigation of Fiber-Reinforced Modified Epoxy Resin Composites
Effects of Sintering Temperature on Structural and Electrical Transport Properties of Zinc Ferrites Prepared by Sol-Gel Route
Use of Flexible Engineered Cementitious Composite in Buildings
Measurement of Loose Powder Density
Permeability Measurement of some Barrier Materials as a Function of Temperature and Pressure
Development of APDL Program for Analysis of Composite Material Multicell Beams
Advanced Materials XII
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
