Description
The papers in this special volume represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technology and applications. Especially, the papers cover the topics of advanced manufacturing technology and equipment, material forming science and technology, digital manufacturing system and management, modern design theory and methodology, and MEMS and ultra precision manufacturing.Volume is indexed by Thomson Reuters CPCI-S (WoS).
The overall themes of the proceedings are advanced manufacturing technology and equipment, material forming science and technology, digital manufacturing systems and management, modern design theory and methodology, and micro-electromechanical systems (MEMS) and ultra-precision machining. The 87 papers discuss such topics as the finite analysis of cutting temperatures with an internal lubricating tool, abrasive-assisted electroforming of nickel on a translational cathode, analyzing the stability of the Hebei Hongfeng Wind Farm integration, simulating the acoustic field of a spherical shell focused ultrasonic transducer, the diagnosis of engineering mechanical faults based on the Internet of Things, and experimental research on the relationship between surface polishing and fracture strength for ground ceramics.
Chapter
High-Speed Turning of Titanium Matrix Composites with PCD and Carbide Tools
Interfacial Microstructure of Ultra-High Frequency Induction Brazed CBN Grains Using Ag-Based Alloy
Test and Simulation of Indentation and Scratch on ZnS
The Analysis on Dynamic Characteristics and the Structural Optimization of HRG Polishing Machine Tool
Study on the Automatic Test Device of Airflow Performance in Refrigerator Transportation Vehicle
Study on the Cutting Forces and Surface Integrity in High Speed Milling of Aluminum-Lithium Alloy
Study on the Milling Technologies of Super-Slender Rod
Study on Tool Life and Tool Wear Mechanisms in Dry Cutting Pure Iron
The Dynamic Analysis of High-Speed Energy Storage Flywheel Rotor System
The Measuring Method of Uniaxial Force Induced Error on CNC Machine Tool
The Multi-Objective Optimization on Milling Parameters of Ultra-High Strength Steel 30Cr3SiNiMoVA
Experimental Study on Heat Transfer Effect of Heat Pipe Grinding Wheel
Experimental Study on Precision Milling of High Volume Fraction SiCP/Al Composites with PCD End Mills
Investigation of Cutting Force in High Feed Milling of Ti6Al4V
Geometry Optimization of D-Type Micro End-Mill with FEM Analysis
Study on Application of Lubrication Technology in Turning Pure Iron
Thermal Design and Analysis of an Internally Cooled Smart Cutting Tool and its Implementation Perspectives
Tool Life of Coated Tools in Face Milling of GH4169 at Various Cutting Speeds
Tribological Properties of CVD Diamond Films against Zirconia Ceramic
Turning of Cast Inconel 718 with Coated Carbide and Whisker Reinforced Ceramic Tools
A New Method of Variable Forming Point Grinding Revolving Parts with Convex Function Generatrix
Abrasive-Assisted Electroforming of Nickel on Translational Cathode
Advanced Nano-Finishing Process of SrTiO3 Substrate by Cluster MR-Effect Plate
Analysis of Wind Load Effect on Ship Loader in Shipping Process
Analysis on Residual Stresses of the Casing Part in Aeroengine Based on Hole-Drilling Method
Development of Multidimensional Loading Material Testing Machine
Energy Characteristics Analysis of Engineering Ceramics during the Process of Edge Chipping Based on AE
Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics
Experimental Study in High Efficiency Milling of Hydrogenated Ti6Al4V Alloy
Ringing Effect and Reversed Current Analysis of RC-Pulse Generator in Electrical Discharge Machining
Safety and Stability Analysis of the Ship Loader during Shipping
Simulation of the Effect of Sintering Temperature on Microstructure Evolution in Nanocomposite Ceramic Tool Materials
Some Observations in Grinding Surface Quality of FRCMC
Study on Acoustic Emission Characteristics of Fiber Reinforced Ceramic Matrix Composites
Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials
Analyzing on the Stability of Hebei Hongfeng Wind Farm Integration
Numerical Simulation of Milling Process: A Total Procedure
Numerical Simulation on Stress Distribution and Failure of Composites Holes with Cold Expansion
The Wear of Al2O3-Based Ceramic Cutting Tool in High-Speed Face Milling of AISI H13 Steel
Research on Critical Cut Depth of Glass BK7 in Diamond Cutting
Research on Machinability of SF6 in Diamond Cutting with Cutting Fluid
Research on Micromechanical Drilling of Micro-Hole Array in PVC Mask
Research on the Influence of Different Surface Machining States on the Inclination of the Porous Gas Bearing
Research on the Modeling and Experimenting of Burr Formation Process in Double-Edged Micro-Plat End Milling Operation
Optimization of the Two-DOF Passive Damper for the Machining Vibration Control Based on the SDM
Numerical Simulation on the Jet Characteristics of Abrasive Jet
Effect of Grinding Speed on Energy Partition for Grinding of Inconel 718 with Vitrified CBN Wheels
Micro-Displacement, Stain and Stress Measurement Based on Electronic Speckle Pattern Interferometry
Research on Cutting Force Characteristics of Laser and Ultrasonic Assisted Cutting of Sintered Tungsten Carbide with FEA Method
Experimental Study of Tool Wear in Milling Multidirectional CFRP Laminates
Simulation and Experiment Researches on Acoustic Field of Spherical Shell Focused Ultrasonic Transducer
Friction and Wear Morphology between Hydrogenated Titanium Alloy and Cemented Carbide
Research on Maintenance Strategy of Large-Scale Grab Ship Unloader Based on Reliability
II. Material Forming Science and Technology
FEM Simulation of the Cold Drawing Process for Copper Strip with Diamond-Coated Shaped Die
The Dynamic Characteristics of Concrete Sawing Based on Wavelet Multi-Scale Analysis
Effects of Nano-Al2O3 on the Mechanical Property and Microstructure of Nano-Micro Composite Self-Lubricating Ceramic Tool Material
Study on the Efficiency-Reinforcement Design for Elastomeric Hydraulic Reciprocating Sealing Based on QFD/TRIZ
Multiple-Section Process Information Description Method for 3D Instruction Publishing
Collaborative Refinement Method for Process Innovation Knowledge Network
Constitutive Relationship and Parameters Optimization of 6181 H18 Aluminum Alloy Hot Forming Process with Synchronous Cooling
Research on Deformation Behavior of 2024 H18 Aluminum Alloy at Elevated Temperature
The Quantitative Relationships between Microstructure and Damage Tolerance of TC21 Titanium Alloy
III. Digital Manufacturing System and Management
A Macroprogram-Based Study of Hyperboloid of Two Sheets CNC Milling
Design of PV/Wind Hybrid Generation Control System Based on PLC
Exceeded Slender Micro-Shaft Machined by Micro-EDM Process
Extraction of Cutter-Workpiece Engagement for Multi-Axis Milling
Geometrical Modeling Method of Process Driven by Typical Process Model
Study on Diagnosis of Engineering Mechanical Fault Based on Internet of Things
Study on the Machined Surface Geometry Generated by Multi-Axis Ball End Milling Process
IV. Modern Design Theory and Methodology
A Study on Tribological Behavior of Engineering Ceramics - Representative Metals
Structure Optimization Design and Application of a Strain Based Dynamometer
An Improved Mathematical Model of Resin Concrete and the Study of its Thermal Stability
Application and Prospect of the Non-Newtonian Fluid in Industrial Field
Finite Element Analysis for Strength Checking of Driven Wheels of "Ferris Wheel" Amusement Machine
The Strength Check for the Cockpit of "Ferris Wheel" Amusement Machine with ANSYS
Development of Oxygen-Rich Supply System Applied in Biomedical Titanium Alloy Cutting
Structure Design and Research of Heat Pipe Cooled Hot Forging Die
V. MEMS and Ultra-Precision Machining
The Design and Fabrication of Dimples Pattern on the Surface of UHMWPE
The Segmentation of Ferrography Images: A Brief Survey
Experimental Research on the Relationship between Surface Polishing and Fracture Strength for Ground Ceramics
Advances in Materials Manufacturing Science and Technology XV
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
