Chapter
Preparation and Properties of Graphene/Polyamide 6 Composites by Melt Compounding
The Effects of B2O3 Addition and Sintering Temperature on the Electrical Properties of SnO2 Based Varistors
A Research of the Spongy Foams from Interpenetrating Polymer Network of Polyurethane/ Epoxy Resin
Preparation of Flame Retardant Polyamide 6 Fibers with Melamine Cyanurate and Bicyclic Phosphates via Melt Spinning
Study on the Properties of Poplar Micro/Nanofibril and its Composites
A Study on Modification Technology of Poplarthrough Impregnating with UF Resin
Effect on the Microstructure and Properties of WC-10% Co Alloy Co-Doped with NbC and Cr3C2
Preparation of Sludge Activated Carbon Adsorbent and its Engineering Simulation Study to Removing Odor
A Generalized Route to Synthesize Nanometer-Sized Metal Oxides by Using Frothing Method
Citric Based Sol-Gel Synthesis and Photoluminescence Properties of Eu3+ Doped NaSrBO3 Phosphors
Effect of Heat Treatment to Ni-20wt.%Al Coating Diffusion
Study on Synthetic Process of Low Toxic Urea-Formaldehyde Resin
Characterization of Antibacterial Effects of Novel Silver Nanoparticles: A Case Study on Pseudomonas as a Model for Gram-Negative Bacteria
Effects of Hydrothermal Treatment on the Structure and Properties of Aviation Polysulfide Sealant
Protein Adsorption on Surface-Attached Weak Polyelectrolyte Layers
Research and Evaluation on the Machining Properties of Plantation Eucalyptus Veneer LVL
Preparation of Conductive Adhesives by Ag/CNTs Composite Nano-Particles
Gold Nanoparticles Self-Assembling on Surfaces of Carbon Nanotubes Modified by Mercapto Groups
Study of Preparation and the Influencing Factors of Chrysanthemum-Shaped Calcium Carbonate Applied to Paper Industry
Preparation and Corrosion Behaviour of Micro-Arc Oxidation Coating on Ti6Al4V Alloy
Phloridzin Isolated from Apple Pomace by Resin
The Mineral Chemistry and Classification of New Ordinary Chondrites Collected in Antarctica
Preparation and Characterization of Cyclophosphamide-Loaded Chitosan Microspheres
Study on Adsorption Properties of Anion Exchange Fiber
PPS/Metal Composite Materials Preparation and Friction Performance
Research on the Control of ZnO Nanostructures Morphology via a Reverse Micellar Route
Discuss the Applications of the Automotive Lightweight Materials in China Briefly
Control on the Photoluminescence of ZnO Nanostructures Synthesized by a Reverse Micellar Route
Synthesis of Microcrystalline Cellulose Grafting Poly (methyl methacrylate) Copolymers by ATRP in 1-Allyl-3-Methylimidazolium Chloride
Observation of a Lamella Structure in a Baked Carbon
High Thermoelectric Performance of p-Type Bi0.5Sb1.5Te3+xTe Crystals Prepared via Gradient Freezing
Photoreactive Carbon and Nitrogen-Codoped ZnWO4 Nanoparticles: Synthesis and Reactivity
Surface Micro-Structure Effect the Combustion and Mechanical Properties of Triple Base Propellants
Cytotoxic Effects of Transforming Growth Factor-α Conjugated with Cytotoxin Saporin on Proliferating Vascular Smooth Muscle Cells
Chapter 2: Advanced Manufacturing Technology
Computational Fluid Dynamics Analysis of Working Fluid Flow and Machining Debris Movement in End Electrical Discharge Milling and Mechanical Grinding Compound Machining
Research on CFD Simulation of the Cement Slurry Mixer
Wind Power Prediction Based on Similar Day Clustering Support Vector Machine
Study on Turbine Blade Abrasion Mechanism and Abrasion Resistance Performance Testing Machine
Study on Cutting Process of Manual Thermite Cutting Technology
Research on Contact Force Control in Process of Aspheric Surface Polish
Research on Exhaust Gas Temperature inside Catalytic Honeycomb Monolith Channel of Natural Gas Burner Start-up
The Stress Change Simulation Analysis for Beam Blank Cogging during H-Beam Rolling
A New Experimental Identification Method for Fluid-Induced Force in Labyrinth Seals
Multi-Fields Coupled Simulation on Casting Process of Aluminum Alloy Based on Heat Conduction by Rotating Heat Pipe Bundle
Experimentation and Research of Three-Phase Switching Synchronous Operation of Novel High Speed Switch Gear
The Study on the Reliability of the Collection System of the Offshore Wind Farms Considering the Electrical Faults and Switchgear Configurations
Chapter 3: Sustainable Manufacturing Technologies
Optimization of the Submerged Fermentation Conditions of Ganoderma Lucidum with High Triterpenoids Production by Response Surface Analysis
The Rule of Migration and Transformation of Naphthalene in Groundwater
A Pseudo-Fourier Series Method and its Application in Tilt Data Processing
The Efficiency of Material Utilization and Energy Conversion of Biogas Fermentation by Annua
Evaluation of an Aerobic Denitrifying Bacterium for Wastewater Treatment
Algae-Removal Treatment of A-F/PDM Composite Coagulants to Summer Taihu Lake Algae-Rich Water under Prechlorination Process
The Integrated Evaluation Research on the Reverse Logistics of End-of-Life Vehicle Based on Green Manufacturing
Tendency of Beach Surface between Maojiagang Two Moles
Phosphate Removal from Aqueous Solution Using Fly Ash Modified with Magnetic Fe-Zn Bimetal Oxide
Research on a Novel Environment-Friendly Synthetic Material Based on Sludge
Chapter 4: Advanced Design Technology
Digital Walking Control System Study for Asphalt Paver Based on DSP
Design of Automatic Nucleic Acid Extraction Instrument Based on Magnetic Nanobeads
Design and Engineering Verification of HTR-PM Fuel Handling
Design of a New Kind of the Radial Annular Seal for the Aeroengine
Collaborative Design of the Injection Mould
An Improved MPPT Algorithm for Off-Grid Wind Power Generator Based on Hill Climbing Method
Line Loss Rate Forecasting Based on Grey Model and Combination of Neural Network
The Classification Research about the Uncertain Factors of Job Shop Manufacturing Shop Re-Scheduling
An Embedded Positioning System Applied to the Seismic Exploration
A Simulation Model for Multi-Factor Sensitivity Analysis on Energy Demand
An Improved Particle Swarm Optimization Algorithm with Invasive Weed
Monitoring of Efficiency and NOx Emissions at a Coal-Fired Utility Boiler
Color Image Segmentation Based on Dynamic Model and Power Spectrum
Study on Integrated Project Delivery Construction Project Collaborative Application Based on Building Information Model
Study on Electronic Kanban Management System in Steel Structure Engineering of an International Expo Centre
Advances on Material Science and Manufacturing Technologies
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
