Chapter
Research on Application of Corn-Diesel Fuels in the Diesel Engine
A Novel Photosynthetic Bacteria Solar Cell
Heat Utilization of Solar Energy in Burley Tobacco Modulation
A Survey of External Feature of Solar Cells in Partially Shading
Evaluation of DNA Extraction and Purification Methods for Corn Straw Biogas Slurry
Mechanism of the Improvement in Microcrystalline Silicon Solar Cells by Hydrogen Plasma Treatment
The Amorphous/Crystalline Silicon Interface Research of HIT Solar Cells by Simulation
Ant Colony Algorithm for the Coordination of Wind and Thermal Generation Dispatch
The Research of Two Staged Non-Isolated Photovoltaic Grid Connected Inverter Control Method
Experimental Research on Solidification Characteristics of Spherical Capsule Packed Bed Latent Heat Storage System
Sectional Data Acquisition and Control System for Solar Street Lamps Based on Internet of Things
Research on Application of a Multiple DC/DC Converter in Photovoltaic Power Generation System
Research and Design of Centralized Control System for Optimizing Microgrids with Renewable Energy Power Generation
Experimental Studies of Emissions in a CI Engine Blended with Refined Palmolein Oil
Preparation and Properties of Poly (phthalazinone Ether Ketone) Based Anion Exchange Membranes for Vanadium Redox Flow Battery
Maximum Power Point Tracking Control for Photovoltaic Module
Progress in Research of Lewis Acid Ionic Liquids Used as Catalyst in Biodiesel Synthesis
Preparation of Biodiesel from Soybean Oil by Ultrasound-Assisted Transesterification
The Analysis and Application on the Typhoon-Induced Vibration Control of the Wind Turbine with a Pendulum Damper
The Study on Coordinated Control Strategy for Micro-Grid Containing Various Distributed Generators
Effect of Diagonal Layout on Efficiency of Twin Vertical Axis Turbine
The Structure Design Techniques of the Embedded Piezoelectric Power Generating Device in Intelligent Building
Internet of Things Sensor Node Information Scheduling Model and Energy Saving Strategy
Research on High Energy Efficient Servo Drive with Safety Integrated Function
Smart Lights Technology Used in Library Energy-Saving
Exploratory Study on Correct use of Air-Conditioning System for Energy Conservation and Emission Reduction
The Artificial Neural Network On-Line Monitoring Model of Boiler Efficiency
Assessment of Life Cycle Energy Consumption and Emissions for Conventional and Advanced Powertrain Vehicles
Chapter 4: Applied Materials Science and Chemical Engineering, Processing Technologies of Materials and Raw Materials
First-Principles Investigation of N-Al Co-Doping Effect on ZnMgO Wide-Gap Semiconductor
Comparison Experimental Study on Apparent Porosity of Brake Linings for Car Based on Water Granulating Technology
Preparation and Characterization of Cobalt Modified Rectorite
Numerical Simulation of Upset-Bending Forging for Heavy Crankshaft
Experimental Study on Powder Suppression Characteristics of Autoclaved Brick
A Review of Experimental Results about In Situ Concrete Strength
Separation of Heavy Metal Ions from the Solution Obtained by Leaching Low-Grade Pyrolusite with Pyrite and H2SO4
Experimental Analysis on the Lubrication Performance Decay of the Using Internal Combustion Engine Oil
Value Analysis and Properties Investigation of High Performance Rice Husk Ash Concrete
Laboratory Experiment Research and Field Tests on Catalyst of Aquathermolysis of Heavy Oils
Preparation of Copper Sulfate Solution from Copper Slag Using Sulfuric Acid Solution
Effects of Rotational Speed of Driver Roll on Hot Ring Rolling of 6061 Aluminum Alloy by 3D FE Simulation
Kinetics of Alkali Isomerization of Linoleic Acid from Walnut Oil Converted into Conjugation of Linoleic Acid
Effect of Different Microbes on Extraction of Main Elements from Illite
Nitrite Scavenging Activity of Apple Polyphenols in Simulated Gastric Condition
Studies on Citronellal Extract Column Reflux Ratio and Theoretical Plate Number Design
Purification and Characterization of Superoxide Dismutase from Martianus Dermestoides Chevrola
The Expression of HIF-L a and VEGF in Endochondral Ossification Processes
Effect of Partial Oxygen Pressures on Pollutant Removal with Membrane-Aerated Bioreactor
A Review on Utilization of Organic Matters in Activated Sludge
Regulation and Homologous Expression of PNA in Panax ginseng by RNAI
Recent Advances in Study of Ginsenoside Biosynthetic Pathway in Panax ginseng
Progress in Understanding of the Key Enzyme Genes of Ginsenoside Biosynthesis in Panax ginseng
Molecular Dynamics Simulations of Atomic Structure in Cu46Zr46Al8 Metallic Liquid and Glass
Hole Expanding Formability Performance and Fracture Appearance Analysis of High Strength Automobile Sheet Metal
Influence of Direct Lamellarizing and Tempering on Microstructure and Properties of F550 Ship Plate Steel
The Tribological Properties of Mg Alloy Produced by ECAE and Laser Melting
The Wear Mechanism Analysis for the Surface of Aluminum Brass in Recoil Brake
Summary of the Function of Sn in Iron and Steel
Study on Abrasion and Corrosion Resistance of Ti-6Al-4V Alloy Implanted by Carbon in Hank's Simulated Body Fluid
Research on Crack Propagation Life of LD2 Aluminum Alloy Material in Corrosive Environment
Effect of Ce(SO4)2 Additive on Coating Formed by Micro-Arc Oxidation Process on Casting Aluminum-Copper Alloy
Preparation and Corrosion Behavior of Environment Friendly Conversion Coating Formed on Zn-5%Al Galvanized Steel
The Minimum Representative Volume Element Size for Coefficient of Thermal Expansion of Particle Reinforced Metal Matrix Composites
New Building Material - The Development and Application of Recombinant Bamboo
Research on Synthesis of Hexafluoropropylene
Influence of Chemical Treatments on Properties of Flax Fiber Reinforced Composites
Value Management and Analysis of Plastic Formwork
Prediction of Fatigue Life for Single Fastener Joints in Composite Laminates
Corrosion Resistance of SiCp/Al Metal Matrix Nanocomposites
Poly(Acrylic Acid)/Bentonite Composites for Removing High Concentration of Methylene Blue
Enhanced UV Photo-Stabilization of PBO Fibers via Sol-Gel Surface Modification
Preparation of Mesoporous Alumina Using Hexamethyl Disilylamine as Substitute Solvent
An Environment-Friendly Thermal Insulation Material from Porous Cellulose Aerogel
Preparation and Characterization of Macroporous Foams Derived from a Phenolic Resin
Co-Extrusion Technology for Functioned Nature Fiber Reinforced Polymer Composites
Effect of Formulation on Thermal Expansion Behavior of Bamboo/HDPE/PA6 Composites Using TMA
Effect of Sintering Temperature on MAl2O4 Catalysts Used for the Catalytic Pyrolysis of Microalgae
Study on Structure and Properties of Degradable Polymer/Modified Nano-Si02 Composites
Effect of the Substrate Temperature on the Transition from Amorphous to Microcrystalline Silicon with High Hydrogen Dilution
Application of MoS2 Nanoflakes in Supercapacitor
The Melting Behavior of Poly(Ethylene Terephthalate)/ Attapulgite Nanocomposites
Preparation and Thermal Propertites of Polyethylene Glycol/ Silica Hollow Nanospheres Composite as Shape-Stabilized Phase Change Materials
Scale Inhibition of the ESA / AMPS Copolymer with Magnetic Field or Electrostatic Field
Defect Recognition for Honeycomb Sandwich Composites Using Pulsed Thermography
Optimal Design of Corrugated Ribbon Sandwich Structure Subjected to Biaxial Shear Loads
Longitudinal Shear Modulus of Honeycomb Cores Based on Shear-Compressive Model
Field Synergy Principle Base on Divergence Equation for Heat and Mass Transfer of Porous Media
Monte Carlo Simulation of Adsorption Isotherms of Pure C5-C7 Linear Alkanes in Pillared Layered Materials
Preparation and Mechanism of Spherical [Ni1/3Co1/3Mn1/3]Ox Precursors for Li [Ni1/3Co1/3Mn1/3]O2 by an Ultrasonic Atomization Method
Fabrication of Hollow (Ni0.8Co0.1Mn0.1) [Ozgur, 2010 #912]Oy Spheres by Ultrasonic Spray Pyrolysis Method
Molecular Dynamics Simulation of Water-Based Nano-Lubrication
The Study of Structural Transformation Induced by Cu Concentration Variation in the Frozen (CoCu)309 Clusters
Use of Hydroxyl Radical Yield to Investigate a Urea and Cobalt Modified TiO2 Photocatalyst Degrading Rhodamine B under UV and Visible Light
CuO/CeO2 and CuO/PrO2-CeO2 Catalysts for Preferential Oxidation of CO
Synthesis of TEOS-Based Silica Spherical Particles by Sol-Gel Process
Effects of K in Mn2O3 on the Electrochemical Performances of Spinel Li1.06Mn2O4
Interconnecting Silicon Posts by Pyrolyzing Diffraction-Induced SU-8 Fibers
Quantum Confinement Stark Effect of Different Gainnas Quantum Well Structures
The Feasibility of Fluorine Ammonium Compounds for Sandstone Formation Matrix Acidizing: Laboratory Study and Discussion
Study on the Promoting Effect of Additive on the Calcium-Based Sulfur-Fixing Agent
Characterization of Oxide Layer Formed on NiTi Alloy by Anodic Oxidation in a Molybdate Electrolyte
Study on the Mechanism of SCR NO by Mn-Ce/CNTs Catalyst at Low-Temperature
Symmetrical Dynamic Expansion Issues of Mode III Interface Crack
Preparation and Characterization of UV Curable Polyurethane Acrylate Adhesives
P-Doped SiO2 Proton Conducting Films for Low Voltage Thin Film Transistors
Memory Devices Based on the Nanoparticle Silicon Floating Gate Double-Barrier Structure
Influences of Particle Sizes on Properties of Natural Rubber/Waste Ground Rubber Powders Blends
Self-Assembled Low-Power In-Plane-Gate Transparent Oxide-Based Thin Film Transistors Gated by Atomic-Layer-Deposited Al2O3
Low-Temperature Sintering Study of Ceramics Based on Multiple Regression Analysis
TiO2 Nanotube Arrays Fabricated by Anodization
Microscopic Mechanism of the Diffusivity of Concrete Chloride Ion
Fracture Properties and Microstructure of Concrete Made with Recycled Aggregate
Fabrication and Mechanical Properties of Natural Rubber/Waste Ground Rubber Powders Blends via a Mechano-Chemical Method
The Preparation and Performance of a Multifunctional Corrosion Inhibitor in Seawater
LiFePO4/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe2O3 as Raw Materials
Practice of Fuzzy Ball Cementing Pad Fluid in Leakage Zone of Naiman Well N-X-Y
Research on Coal-Formed Gas Reservoir Combined Qualitative and Quantitative Methods
Chapter 5: Environmental Science and Engineering
Dynamic Behaviors of a Discrete Two Species Competitive Model
Evaluation System of Air Distribution in Gymnasium
Analysis of Game Theory Application in the Land Acquisition of Major Projects in China's Urban Area
Field Study on Remediation of PAHs Contaminated Soil by Ex Situ Technologies at a Coking Site
Effects of Flue Gas Inlet Structure on the Flow Field Characteristics of Multi-Stage Liquid Column Scrubber
Research of the Processing Technology and Quality Standard of Indocalamus latifolius Leaves
The Characteristics of Rare Earth Elements of Red Mudstones in the Lower Part of the Fourth Member of Shahejie Formation in Dongying Depression and its Geological Significance
The Application of GIS to the Study of Historical Geography: a Case Study of China T'ang ‘FanZhen’ Period
Analysis of Energy Conservation and Environmental Protection in Construction Enterprises
Effect of Slope Positions and Years on Three Indexes to Artificial Ecological Substrate
Growth Trajectory Modeling for a Full-Sib Pedigree of Salix suchouenesis
Bending Strength and Effective Modules of Songhua River Ice
Performance of Soil-Root System of Setaria viridis Community in Soil Reinforcement and Slope Protection on the Water-Level-Fluctuation Belt in the Three Gorges Reservoir Region
Research on Interface Symbols of Sand Groups and Characters of Interior Gyrations of Heidimiao Layer in Yingtai Area
Study on Water Saving Technology of Water Ecological Construction in Shaoxing
Numerical Simulation of Flow Structures on the River Conjunction Area
Evaluation of Water Quality of Rural Drinking Water and Countermeasure Research in Luquan City
Exploration of Ecological Design Strategies and Technologies for the Floating Residences on Sea - A Case Study in the Xiapu Region of China
Study on Water Source Area Environmental Protection and the Coordinated Development of Towns in Water Source Area
Combined Forecasting Model Based on the Rough Set to Predict the Chinese CO2 Emissions
Comprehensively Evaluating Soil Nutrients in Spring Wheat (Triticum aestivum) Field under Regulated Deficit Irrigation in an Arid Environment
Soil Nutrients and Grain Yield Performance in Spring Wheat (Triticum aestivum) as Influenced by Regulated Deficit Irrigation
Formation and Evolution of Luyang Lake Wetland
Research on Dust Pollution and Control Countermeasures in Working Environment of Manufacturing Friction Materials
Accumulation and Environmental Risk on Heavy Metal Pollution in Bottom Sediments of Surface Waters in Xiao Qinling Gold Mine Belt, China
The Analysis of Stability of Inter-Regional Water Resource Redistribution
Study on Well Location Methods in Deep Buried Area of Karst Aquifer-Giving an Example in Boai County, Henan
Thermal Comfort Analysis of a Ship Air-Conditioning System Using Solidworks Flow Simulation
Removal of Arsenic from Wastewater by Using Pretreating Orange Peel
Comparative Study on Classification of Remote Sensing Image by Support Vector Machine
Adsorption and Regeneration Characteristics of Granular Adsorbent Based on Coal Fly Ash for Methylene Blue Removal
Activated Carbons for Ventilation Air Methane Enrichment by Vacuum Pressure Swing Adsorption
N,Fe Nano-TiO2 Doped on the Fly Ash Forming Absorbent and the Photocatalytic Activity Study
Effect of Gas Composition on Removal of NO by Dielectric Barrier Discharge
Analysis Degradation Effect of Aniline Wastewater by Ultrasound
Enhancement of Carbon Dioxide Adsorption by Lithium Decorating and Fullerene Encapsulating in Metal-Organic Frameworks
Research on Incentive Mechanism of Green Building Development
Chapter 6: Engineering Management
Relationship between Dollar Exchange Rate, Monetary Liquidity and International Oil Price
Impact of Monetary Policy on Industries Energy Demand in China
Research on the Electric Vehicle Remanufacturable Battery Supply Chain with Recycling Channels
An Evaluation of Critical Raw Materials for China
Full Life-Cycle Analysis of Electric Power Enterprise Device Management
Research on Risk Assessment of the Power System Operation Safe
Investigation and Analysis about the Construction and Utilization of Biogas Digester in Changyang County
Industrial Technologies for Sustainable Development
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
