Chapter
Parametric Human Body Model for Digital Apparel Design
Virtual Design of Rapid Sample Preparation Equipment for Textiles Based on SOLIDWORKS
Research on Knowledge-Based and Featured Mechanical Part Modeling
The Research of Reverse Engineering Based on Geomagic Studio
Parameter Mapping Method of the Skull Restoration Based on User Demand
Research on Injection Products Molding Defects Warping Based on Moldflow
Numerical Modeling of Fire Dynamic Behavior for a Five-Story Building
Truss Structural Optimization Based on NLPQL and MIGA
The Development of the ACIS-Based Deformation Modeling System and its Application
Dynamic Simulation and Optimization of Suspension Rig Based on ADAMS
Genetic Algorithms Study in Switch Electrical Appliances Electric Arc Feature Extraction
Opposition-Based Improved Harmony Search Algorithm Solve Unconstrained Optimization Problems
A New Variant Harmony Search Algorithm for Unconstrained Numerical Optimization Problems
Opposition-Based Modified Differential Evolution Algorithm for Power System Economic Load Dispatch
Modified Harmony Search Algorithm for 0-1 Knapsack Problems
Computational Modelling of Liquid Sloshing in Rectangular Tank
On Starting Population Selection for GSAT
Study on the Improvement of Genetic Algorithm by Using Vehicle Routing Problem
Chapter 3: Researches, Modeling and Analysis of Machines and Mechanisms
Finite Element Analysis of a Wind-Solar Hybrid Powered Street Light
The Dynamic Property Research of Ink System Based on Computer Simulation
Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method
The Analysis of Scrapping in Squeeze Casting Injection Device Based on FEM
Analysis of Injection Molding Machine's Energy Consumption Based on Two Different Hydraulic Circuits
The Study on Airborne Equipments Life Prediction Based on the Finite Element Simulation under Comprehensive Stress
Numerical Investigation of Interaction between Flexible Hyper-Elastic Structure and Fluid by Immersed Boundary Method
Numerical Research about Two-Phase Flow under Different Acceleration in SRM with Embedded Nozzle
Finite Element Analysis of Glass Fiber Reinforced Plastic Hyperbolic Natural Draft Cooling Tower
Connections Checks of Pipe-Laying Barge Stinger System under Complex Loading Conditions
The Deep Beam Bending of Rectangular Section under Concentrated Load
Analysis Methods of Mechanism Life from its Dynamic Performance
Dynamic Simulation and Analysis of Resistance Ring Correction Mechanism
Magnetoelastic Effect Analysis of a Thin Current-Carrying Plate in an Invariable Magnetic Field
Co-Design Research on the Welding Structure of the Metro Bogie
Model Updating of Dynamic Systems Using Structural Reanalysis Method
Modeling of Railway Axle Box System for Thermal Analysis
The Influence of the Material Properties on the Hydraulic Spool Valve's Viscous Temperature Rise
The Drive Axis Simulate Analysis on the Spiral Bevel Gear Milling Machine
Heat Sink Design for Thermoelectric Generation in Spindle Unit
Dynamic Simulation and Experimental Research of High Pressure Pneumatic Valve in Gas-Driven Light Gas Gun
Tooth Contact Analysis of Parabolic Gears with New Type of Profile
Research on Dynamical Characteristics for the Feed System Considering Nonlinear Friction Force
Dynamic Analysis of High-Speed Hybrid Thrust Bearings
Three-Dimensional Analyses of Spur Gear Bending Stresses by Global-Local Finite Element Technique
Dynamic Behavior of All-Ceramic Spindle-Bearing Unit with Preload
Influence of the Groove Width on the Aerostatic Dry Gas Seal
Simulation of the Self-Adhesive Label Printing Pressure Based on Non-Linear Contact
Analysis of Gear Static Transmission Error and Mesh Stiffness
FEM Analysis of Contact for Converter Spherical Hinge
Finite Element Analysis on Thermal-Stress in Lining Expansion Gap Setting Affects on 150t BOF Shell
A Study of Shaft Vibration Based on Transfer Matrix
Movement Function Reliability of Limit-Locking Mechanism of Space Cable-Strut Deployable Articulated Mast
Simulation on Vibration Isolation System for Vibratory-Drum Test Stand
Static Characteristics of Micro Disc Magneto Electric Generator – Simulation and Experiment
Structure and Development Trend of the Typical Aluminum Electrolytic Capacitor Casing Machine
A Simple Correlation Equation to Predict Pump Performance for Slurry
Modeling and Simulation of Thermostatic Mixing Valve
Deformation Analysis of Beam Pipe Installation Mechanism for EPC
Chapter 4: Automotive Engineering
Influence of Rail Cant on Wheel-Rail Contact Relationship and Dynamic Performance in Curves for Heavy Haul Railway
CFD Optimization Analysis of a Cooling Fan for Mining Dump Truck
Analysis and Design of MRF Elevator Traction Transmission Device
Research on BP Based Fuzzy-PID Controller for Anti-Lock Braking System
Research on Evasion Control of Vehicle Anti-Collision Warning System
Contact Mechanics in Cylindrical Clearance Revolute Joints
Simulation on Vibration Friction Mechanism of Vibration Pile System
Numerical and Experimental Researches of 1:10 Tank Car Longitudinal Vibration with Fluid Sloshing
Effect of Lubrication on the Erichsen Test
Implicit Parameterization Modeling and Validation for Body-in-White of a Car
Study on Dynamic Roll Stability of Articulated Engineering Vehicle Based on Virtual Prototype
Design on Vehicle Steering Mechanism and Research on its Steering Error Properties
The Optimization Design of Opening and Closing Mechanism of Aerodynamic Braking in High-Speed Train
Test Model of Automobile Engine Magneto-Rheological Mount Based on RBF Neural Network
A Comprehensive Study of Propulsion Torque Distribution for a Parallel Hydraulic Hybrid Heavy Bus
Towards Knowledge-Oriented Smart Vehicle Adaptive Traffic Service
Analysis on Evolution of Car Carrier Based on Theory of Technology Evolution
An Overview of Foreign Matter Invasion Systems for High Speed Railways
Numerical Simulation of Influence of Different Deflectors on Aerodynamic Characteristics of the Heavy Duty Truck
Effect of Pretension on the Dynamics of Chain Drives
Study on Vehicle Hook Buffer Mechanism Based on Sequential Image Analysis
Finite Element Analysis for a Certain Type of Vehicle Engine Shock Absorber Assembly Performance Based on ANSYS Workbench
Research of Suspension Kinematics Based on Virtual Prototyping Technology
High Power Soft Switching Current Buck DC-DC Converter for Fuel Cell Electrical Vehicles
The Research of Sliding Boot Design Based on Compliance Characteristic
Plowing Performance Simulation and Analysis for Hybrid Electric Tractor
Chapter 5: Technologies and Organization of Production in Mechanical Engineering
Description and Smoothing of NC Motion Path Based on the Cubic Trigonometric Interpolation Spline
Research on Reliability Growth Technology of CNC Grinding Machine
Research on Manufacturing Process of Buried/Blind via in HDI Rigid-Flex Board
Research on Semantic SOA Framework Construction Oriented with Aviation Manufacturing
Research on the Combined Forming Process for Large Curvature Outdoor Antenna Reflector Elements
The Green Design and Manufacturing Technology Based on the Recycling Theory
Design Method Research on Green Modular that Oriented Remanufacturing Engineering
Modeling and Simulation of Continuous Flexible Roll Forming Process
Planning and Scheduling Models for EMAS Productive Process
Application of the Mond Index in the Safety Assessment of Obsolete Solid Rocket Motor Pretreatment
The Improvement and Finite Element Analysis of Large Crankshaft Forging Process
The Application of Three-Dimensional Digital Technology in Aircraft Assembly Process Design System
An Experimental Study on the Effect of Die Chamfer Shape and V-Ring Position on Die Roll Height in the Fine Blanking of a Special Part with Various Corner Shapes
Optimizing Maintenance Strategy of Multi-Stage Production System Based on Genetic Algorithm and Configuration
Key Technologies Research on Section Display of Full 3D Gas-Assisted Injection Molding Simulation Results
Development of Fast and Non-Destructive Disassembling Equipment for LCD Framework
A Study on Manufacturing of Stiffened Cylinder
Heat and Mass Transfer Measurements for Bio-Substrate Drying Processes
Simulation Optimization of Multi-Objective Flexible Job Shop Scheduling
Chapter 6: Sensors, Detection and Measuring Technologies
Long-Distance Ultrasonic Ranging System Oriented to Tower Crane Anti-Collision
The Real-Time Measurement System Design for the Axis of Rotary Kiln Based on Virtual Instrument
Analysis of Major Defects and Nondestructive Testing Methods for Solid Rocket Motor
Research on Axis Piezoelectric Six-Axis Force/Torque Sensor Clamping Device
Development of Capacitive Position Sensing Geophone for Microtremor System
Study on the Propagation Characteristics of Acoustic Emission in Point Contact Bearing Ball
A Measurement System for Si1-xGex/Si Multi-Quantum Wells Film
Development of Experimental-Bed for Observation of Locomotory Small Animals
Study on Test Method of Interior Noise Caused by Body Panels
Error Analysis of the ATOS 3D Optical Scanner in Vehicle Measurement
Design of Data Acquisition System for Fiber Optic Gyro Based on the FAT32 File System
Monitor System for Automatic Grouting of Metamorphic Concrete Based on PLC and HMI
Camera Calibration Technique Based on HALCON Machine Vision
Selection of the Appropriate Type of Sensory Equipment
The Research of RITS Time Synchronization Algorithms in WSN
The Hardware Devices in the Workspace of Intelligent Assembly Cell
Efficient Inspection Algorithm for IC Solder Joints Based on Feature Statistical Analysis
Research on Voltage Disturbance Detection of PV System Based on Mathematical Morphological and Backward Difference
The Radome Detection Machine Tool Geometric Error Modeling and Measurement
Study on Pairwise Bundle Adjustment and One Dimension Wand Calibration for Cameras Group
A Calibration Method for the Logging Instrument Used in Harsh Environments
Geometrical Shape Analysis for Investment Casting Turbine Blade Based on Optical Measurement
Defect Classification Using Machine Learning Techniques for Flat Display Panels
Applying Full Vector Spectrum for Electric Hoist Gearbox Fault Diagnosis
Defects Detection of Sheet Metal Parts Based on HALCON and Region Morphology
Rapid Analysis of Zinc in Soil with Long-NIR Spectroscopy
Waveband Selection for NIR Spectroscopic Analysis of Zn2+ in Soil
Design of Rail Vehicle Weighting System Using Pressure Sensor
The Research on Design and Manufacture of AC Resistor
The Measurement and Analysis of Torsional Vibration for Rotating Machinery
Torque Balance Mechanism Applied to Oceanographic Profiler
A Research of Rice Water Stress Index Based on Automated Infrared Thermography Technology
Chapter 7: Robotics, Automation and Control System
Advances in Research of Dynamic Modeling of Joints with Harmonic Drives for Space Manipulators
The Humanoid Substation Inspection Robot Modelling Design
Motion Analysis and Research of Manipulator in Unilateral Suture Robot
A Service Reliability Assessment Method for the Rigidity-Flexibility Coupling Open Arc Welding Robot
Energy-Based Approach for Controller Design of Overhead Cranes: A Comparative Study
An Overview of Coal Mine Rescue Robot and its Navigation
Structural Layout Design and Manufacture of a New Aerial Robot
Adaptive Control of Rubbing Rotor under Flow Induced Force
Mechanical Design and Simulation of a Finger Rehabilitation Robot
Hardware Technology Research on Ultra-High Pressure Water Jet Ship Rust Control System Based on PLC
Terminal Sliding Mode Control for Wind Energy Conversion System Based on Constant Tip Speed Ratio
A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation
Wake Vortex Control Using Modified Flaps
The Application of Intelligent Industrial Robots in the Mine Research and Design
Simulation Research on Load-Imitating Test Equipment for Hydraulic Drive Unit of a Quadruped Robot Based on Feed-Forward Decoupling Control
A Fuzzy PID Controller in the System of BLDCM
Backstepping-Based Adaptive Fuzzy Sliding Mode Control for Autopilot Design
Research on Data Acquisition Method for Substation Automation
Study on Application of Interval Type 2 Fuzzy Logic Control for Gap Width Controller Used in EDM Machine
On-Site Skill Examination System for Crane Operators Based on Distributed Cooperative Control Technology
The Improved Design of Test Machine Linear-Velocity Closed-Loop Control Circuit
Calculation Method of Shearer Space Pose Based on Triaxial Accelerometer and Single-Axis Gyro
An Underwater Driving Mechanism Moved inside
Study of Permanent Magnet Synchronous Motor Current Robust Control Based on Adaptive Fast Terminal Sliding Mode Control
Research on Typical Methods of S Surface Controller Parameter Self-Tuning for Underwater Vehicles
Cooperative Control of Multiple Autonomous Underwater Vehicles
Motion Reliability Analysis of the PUMA560 Series Mechanism
Industrial Sewing Machine Design and Development of Digital Design and Simulation Platform
Efficient Simulation of Single Degree of Freedom Servomechanisms for Automatic Machines
System and Design of Five-Axis Water Jet Incremental Sheet Metal Forming Machine Tool
Stability and Stabilization of Discrete Switched Systems Based on Parameter-Dependent Lyapunov Functions
Constrained Ruled Surface Reconstruction for 5-Axis NC Machining of Aero-Structure
The Problem of Selection of Fingerprints for Topological Localization
Automatic NC Programming for Chamfering Addendum of Spiral Bevel Gear Based on UG/Open
A Power Management System for Thermoelectric Generators Used on Spindle Units of Machine Tools
Variable-Frequency Pump Controlled Piston System for Box Jacking
Logistics System Simulation Optimization Process
Building the Panoramic Image for Mobile Robot Localization
Chapter 8: Applied Materials Science and Chemical Engineering
Residual Stress Analysis on Electrical Discharge Lapping (EDL) of Polycrystalline Diamond
Research on the Impact of Temperature on the Softening Point of SBS Modified Asphalt
Thermodynamics of Calcium Phosphate Porous Scaffold on Beta Phase Tricalcium Phosphate Effects
Air Oxidation of Porous Cu-35wt.%Ni-(5,10,15) wt%Cr Alloys at 650°C
Life Prediction and Verification under Multiaxial Fatigue Loading
The Studies on Basic Element Design of Compound Material Surface Structure Models
Effects of Sodium Hydroxide Treatment Duration on the Physical Properties of IRM®/Polylactic Acid Composite Filling Materials
Influence of Heat Treatment on Microstructure and Tensile Property of Ti-5Al-5Mo-5V-3Cr-1Fe Alloy
Optimization of Thermoplastic Pre-Pregs Overmoulding
Measurement of Internal Residual Stress of the Laser Rapid Forming Parts by Incremental-Step Hole Drilling Method
Effects of Resin Injection Speed on the Bubble Content of Glass Fiber Laminate
Growth Retardation of Fatigue Crack by Cold Expanded with Ring Indented Method for AISI 304 Stainless Steel
Morphology of Poly(vinyl alcohol)/Graphene Nanosheets Composite Nanofibers
Study on the Dent Resistance of Warm Forming HSS Parts with Free-Form Surface
Determination of B Impurities in Silicon by Inductively Coupled Plasma Emission Spectrometry
Effect of Protein Variety on Properties of Gelatin Edible Films
Effect of Twist Coefficient and Thermal Treatment Temperature on the Properties of PET Yarn
Application of Porous Chitosan/Gelatin Bone Scaffolds Used in Bone Tissue Engineering
Numerical Simulations of Micromechanical Properties of Al Alloy/SiC Hollow Sphere Syntactic Foams Composites
Comparison of the Simulation and Experimental Mechanical Properties of B4C-ZrB2/Al Interpenetrating Phase Composites (IPC)
Compressive Strength of Porous Bone Cement/Polylactic Acid Composite Bone Scaffolds
Comparative Sound Absorption and Thermal Insulation Properties of Compound Fabrics
Investigations on Dynamic Puncture Behaviors of Integrated Composite Reinforced with Varying Fabrics
Mechanical and Electrical Properties of the Polyaniline (PANI)/Polylactic Acid (PLA) Nonwoven Fabric
Effects of Processing Parameters on Constant-Rate Puncture Resistance Behaviors of Compound Fabrics
Effects of the Content of High Strength Polyethylene Terephthalate Fiber and Kevlar Fiber on Properties of Geotextiles
Property Evaluation of PET Fiber and Metal Fiber Composite Woven Fabric
An Integrated Manufacturing Process of CFRP Parts Based on RFI and Cutting Process
Phase Transformation of MgAlON-SiAlON Powders Synthesized by Carbothermal Reduction-Nitridation from Ludwigite Tailings
Super-Hydrophobic Film Prepared with Reduced Graphene Sheets and its Application as Corrosion Barrier to Copper
Tensile Strength Characteristics on ETFE Film for Membrane Roof System
Enhancement of Corrosion Resistance of PEO Coating on AZ91 Biomedical Magnesium Alloy by Surface Laser Treating
Fabrication of Al2O3 Ceramic Coating on AZ91 Biomedical Magnesium Alloy and the Corrosion Resistance in SBF
NGV. Using to be Alternative Energy in Metal Melting
Influence of Centrifugation Time and Force on Monodispersion of MWCNTs Aqueous Solution
Deform Based 1Cr18Ni9Ti Pipe Joint Upsetting Extrusion Process Finite Element Numerical Simulation Analysis
The Development of Small Size Double Side Metal Plate with Internal Structure Utilizing Metal Injection Molding Process
Experimental Study on Indium Recovery from Discarded TFT-LCD Panels
Algorithm Design of Four-Step Three-Dimensional Braided Composite Structures in Matlab Environment
Impact-Resistant Polypropylene/Short Glass Fiber Composites with Far-Infrared Emission: Manufacturing Technique and Property Evaluation
Manufacturing Technique and Property Evaluation of Resilient Nonwoven Fabrics
Manufacturing Technique and Property Evaluation of Eco-Friendly Kevlar/PET/Nylon Composite Geotextile
Manufacturing Technique and Property Evaluation of Polyester/Polypropylene Fasciated Yarn Used in Geogrids
Manufacturing Technique and Property Evaluation of RFPET/TPET Hybrid Nonwoven Fabric
Manufacturing Technique and Antimicrobial Activity of Silver Nanoparticles
Manufacturing Technique and Properties Evaluation of Ni-Coated Copper Composite Fabrics
Processing Technology and Characteristic Evaluation of Absorbent Cotton
Predictive Modeling of Minimum Quantity Lubrication: Cutting Force, Temperature and Residual Stress
Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing
Evaluation of the Coulomb Friction Coefficient by the Erichsen Test
Structural Optimization Design of the Arc Finger Seal
Microstructure and Electrochemical Properties of La0.7Mg0.3(Ni1-xCox)3.5(x=0.0-0.2) Type Hydrogen Storage Alloy
Analysis of Influence Factors on Springback for Blade of Stamping Welded Hydrodynamic Torque Converter
Free Vibration Analysis of Carbon Nanotubes by Timoshenko Beam Model and Thin-Plate Spline Radial Basis Function
An Analytical Method of Analyzing the Heat Conduction for the Unequal Cross-Section Straight Fin
The Design and Optimization of Nonwoven Composite Boards on Sound Absorption Performance
A Study of the Effect of Forcipomyia Taiwana Repellents Made of Plant Extracts
Effects of Warp-Knit Structure on the Properties of the Elastic Bamboo Charcoal/Stainless Steel Warp-Knitted Fabrics
Ship Welding Defect Analysis and Quality Control
The Characteristics of Titanium Alloy Chip-Breaking by Orthogonal Cutting with a Surface-Textured Cutting Tool
Chapter 9: Product Design
Interpretations to the Esthetics of Exposed Symbol in Product Design
A Method of Cultural Creative Product Design Based on Reverse Engineering
Product Innovation Design Method Based on Pan-Ethnic Group Design Gene
Research on Market-Oriented Souvenirs Development Strategy
Design Planning and Top-Layer Design of Products
Harmonious Design Method of Product and its Applications
Research on Tourist Souvenirs Design Method Based on Gene Engineering
Research on the Selection Method of Tourism Cultural Souvenir Products Types Based on Multiply Drive Factors
Product Evolution Design Oriented Quality Characteristic Positioning Based on Two-Dimensional Space
A Brief Historical Review of Western Approaches to Energy Design before Professionalism
Computer-Integrated Manufacturing for Chinese Herbal Medicine Drinks Products
Production Processes Design Hybrid Depth Interview-Glutinous Rice Processors for Examples
Chapter 10: Other Themes of Research
Design and Application of a Secure Chip Key Issuing System
Damage Radius Study of Gimbaled Forward-Firing Warhead to Tactical Ballistic Missile
On Energy Harvesting Characteristics of Cymbal Transducer
Congelation Risk Assessment of Oil Pipeline on Basis of Improved Monte-Carlo Method
SIGSO Satellite Tracking Characteristics of Large-Diameter Parabolic Antenna
The Research of the Rehabilitative Exercises System of Residual Limbs Based on EMG Sensor
Optimize the Multi-Dimensional Test Coverage Based on Multiple Attribute Decision Making and Cross Entropy Method
Evaluation of Spherical Parameterization Methods for Three-Dimensional Reconstruction of Medical Images
Study on Bio-Pharmaceutical Industry Development Route and Strategy
Machine Design and Manufacturing Engineering II
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
