Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).The peer review papers of this volume on “Materials Science and Technology” are grouped as follows: Chapter 1: Advanced Ceramic Materials; Chapter 2: Biomedical Materials and Devices,Chapter 3: Materials for Energy and Environment;Chapter 4: Material Reliability; Chapter 5: Metals, Alloys and Intermetallic Compounds; Chapter 6: Polymer-based Materials; Chapter 7: Simulation, Design and Manufacturing.
Bangkok's biennial event is recognized as one of the major conferences inmaterials science, technology, and engineering. This year's 38 papers coveradvanced ceramic materials; biomedical materials and devices; materials forenergy and the environment; material reliability; metals, alloys, andintermetallic compounds; polymer-based materials; and simulation, design,and manufacturing. The topics include preparing porous ceramic and itsutilization as a spa compress ball, virgin coconut oil containing injectablevehicles for ibuprofen sustainable release, the effects ofethanol-diesel-biodiesel blends on fuel properties, the effect of ultrasonicvibration on properties of weld metal, and how adding helium to the argonshielding gas effects metal transfer behavior in the gas metal arc weldingof aluminum.
Chapter
The Characteristic of Inner Surface Coating on Porous Al2O3 Tube by Electrophoretic Deposition
Alternative Soda-Lime Glass Batch to Reduce Energy Consumption
Synchrotron Small Angle X-Ray Scattering Spectra of Iron-Based Magnetic Fluids
Preparation of Porous Ceramic and its Utilization as Spa Compress Ball
Chapter 2: Biomedical Materials and Devices
Preparation and Characterisation of Cattle Bone Based Hydroxyapatite Implant Coatings Using Electrostatic Spray Deposition
Virgin Coconut Oil Containing Injectable Vehicles for Ibuprofen Sustainable Release
Modifying Poly(L-Lactic Acid) Matrix Film Properties with High Loaded Poly(Ethylene Glycol)
Benzoyl Peroxide In Situ Forming Antimicrobial Gel for Periodontitis Treatment
Preparation of 3DP Hydroxyapatite Composite by Single and Double Pass Poly(ε-caprolactone) Infiltration
Chapter 3: Materials for Energy and Environment
Development of Porous Polypyrrole Electrode for Fuel Cell Applications
Development of a Kraft Paper Box Lined with Thermal-Insulating Materials by Utilizing Natural Wastes
The Effects of Ethanol-Diesel-Biodiesel Blends on Fuel Properties
The Effect of Titanium Dioxide and Additives on Heat Reflection and Thermal Reduction of Paint
Metal Adsorbent Prepared from Coir Pith as Agricultural Waste: Adsorption of Zn(II) and Pb(II) from Aqueous Solution
Optimal Decolorization Efficiency of Reactive Red 3 by Fe-RH-MCM-41 Catalytic Wet Oxidation Coupled with Box-Behnken Design
Ni0.75Co0.25/(Gd2O3–CeO2) Anodes for Solid Oxide Fuel Cells
Effects of Diatomite and Glass Cullet in the Waste-Based Gypsum Building Materials
Comparison on Pore Development of Activated Carbon Produced from Scrap Tire by Potassium Hydroxide and Sodium Hydroxide for Active Packaging Materials
Optical Band Gaps and Electrical Conductance of Si Nanocrystals in SiO2 Matrix for Optoelectronic Applications
Chapter 4: Material Reliability
Proper Heat Treatment to Reduce Intergranular Corrosion Susceptibility of Austenitic 304 and Ferritic 430 Stainless Steels
Injection Moulding of Tungsten Carbide-Nickel Powders Prepared by Electroless Deposition
Studies on Potentiodynamic Polarization Behaviour of Cryorolled Al-Mg-Si Alloy
Tribological Properties of Titanium Plate Coated with Carbon Nanotubes
Tribological Properties of PM Cu-Based Dry Friction Clutch
Chapter 5: Metals, Alloys and Intermetallic Compounds
Powder Injection Moulding of Alumina Using PEG/PVB Binder Systems
The Effect of Ultrasonic Vibration on Properties of Weld Metal
Welding Procedure Development for Welding of High Strength Carbon Steel Cladded with Austenitic Stainless Steel 316L by Using Overmatching Filler Metal
Study of Particle Distribution in Al-SiC Particulate Composite by Random Motion of Mould
Synthesis of Bulk Metal Matrix Nanocomposites by Full Cavitation Solidification Method
Effects of Sintering Time and Atmosphere on Mechanical Properties of Injection Molded Tungsten Alloy
Chapter 6: Polymer-Based Materials
Thermal and Mechanical Properties of Highly-Filled Polybenzoxazine-Alumina Composites
Chapter 7: Simulation, Design and Manufacturing
Effect of Helium Addition in Argon Shielding Gas on Metal Transfer Behavior in Gas Metal Arc Welding of Aluminum
Optimization of Induction Brazing Parameters for Stellite Strip of Steam Turbine Blade Using Taguchi-Neural Network
Experimental Investigation of De-Oiling Hydrocyclone
Feasibility Study of Acoustic Emission Monitoring of Hot Cracking in GTAW Weld
Materials Science and Technology VII
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
