Chapter
Design and Build of a Nine-Axis Digital Output Gyroscope-Based Percutaneous Puncture Ultrasonic Navigation System
Construction Principle and Application Test of 220kV Self-Healing Optical Voltage Sensor
A Survey on QoS-Aware Secure Data Transmission in Multimedia Sensor Networks
The Influence of Implantable Actuators on Residual Hearing: A Computational Study
Wireless Sensor Networks for Structural Healthy Monitoring Applications-A Design Proposal
Dynamic Estimation of Water Hyacinth Area by Fusing Data from Satellite and GPS Sensors
Optimal Ecological Restoration of Degraded Wetland Ecosystem by Using Satellite Sensors
PZT Based Ultrasonic Wave Force Detecting Sensor
Research on Routing Protocol for Large-Scale Wireless Sensor Networks
Research on Wireless MAC Protocols Oriented to Smart Clothing
Sensor Node Identifier Resolution of IP-Based and Non-IP-Based WSN
Study on the Conductivity of DMEM by PASCO Sensors
Study on Transient Temperature Generator and Dynamic Compensation Technology
Substation Equipment Temperature Monitoring System Based on Heterogeneous Wireless Sensor Network
Tamper Detection in RFID Tags Using Zero-Watermarks
Tuning Characteristics of DFB Diode Laser and its Application to TDLAS Gas Sensor Design
Theoretical Modeling and Error Analysis for Reflection Structure Fiber Optical Current Transformer
The Calibration Techniques of Paper Basis Weight Sensor
Modeling of Collaborative Context-Awareness for Smart Home
Sensor Fault Diagnosis Based on SOFM Neural Network
Design of Landslide Monitoring and Early Warning System Based on Internet of Things
The Design of a Basketball Goal Automatic Detector
Chapter 3: Measurement Theory and its Application
Numerical Analysis of the Effects Caused by Ground Reflection on Aperture Coupling
Acoustic Wave Resonance of Stimulated Brillouin Scattering in a Single Mode Fiber Ring
Rules of Harmonic Longitudinal Propagation in Various Voltage Classes
Study on the Multi-Optical Theodolites Positioning Method Based on Function Restriction
Suppressing of Nonlinear Phase Noise in Dispersion Managed Quasi-Linear Transmission Systems
Weight Size Determined Variable Step Size LMS Method for Identifying under Damped Systems
A Fuzzy Curve Detection Method Based on Lateral Acceleration
Research and Performance Analysis on Pedestrian Detection Based on Optimized Hog and SVM
Chapter 4: Measurement Technology and Instruments
A New Method for Calculating the Volume of Debris Flow Using GIS and RS Technology
Design of Thermocouple Verification Data Records Table Based on Labview
Development of a Transducer for Dental Implant Stability Measurement
Temperature Influence on Real-Time Ultrasonic Detection of Multi-Planetary Gear Transmission
Application of Frequency-Voltage Converter Chip in the Vehicle Data Acquisition
Measuring Model Deformation with Project Moiré Interferometry Technique
Multi-Point Temperature Monitoring System for the LNG Storage Tank
Research on the Impact of CNC Servo Dynamic Characteristic for the On-Line Detection Precision
The Quality Test of TOPCON NET-G3A GNSS Receiver
Weak Signal Detection and Application in Electronic Experiment Based on Virtual Instrument
Design of a Constant Probing Force System for Profilometer
Research on Sound Velocity Measurement Method by Three Microphones Based on LABVIEW
Study on Temperature Measurement Technology of Oil Immersed Transformer and Associated Prony Algorithm
Research of Film Thickness Online Measurement System
The Design and Application of the Groundwater Monitoring System Based on the Internet of Things in the HeiHe River Basin
Chapter 5: Signal and Information Processing Technology
A New Method Based on Lyapunov Exponent to Determine the Threshold of Chaotic Systems
An MMSE Approach to Channel Shorting for Underwater Acoustic FH-FSK Communication
Application of Barcode Information and Acquisition System for the Machining Process Technology
A New Cascaded Stochastic Resonance System and its Application to Weak Double-Frequency Signal Separation
Capability Assessment of Satellite Communication System Based on Multi-Granular Modeling
312.5 Mbit/s Visible Light Communication System Based on OOK Modulation
Research on Discharge Signals Feature Extraction of Sealing Packaging Food Existing Pinholes Based on EEMD
Dynamic Displacement Response Characteristics of a Solenoid Actuator for Electromagnetic Separation
Error Processing Techniques of Integral Velocity Based on Frequency Spectrum Forecasting
FH-FSK Underwater Acoustic Control and Communication System Based on LDPC Code
Monitoring System for Plant Growth Environment Based on Zigbee/RS485
Query Recommendation Based on Document Content User Focuses on
Feature Extraction of the Small Leakage Diagnosis of Oil Pipeline Based on Acoustic Signal
Pseudo Two-Hop Distributed Consensus with Noise
Research on MWD Mud Pulse Signal Waveform Identification Algorithm
Ultralow Frequency Standard Vibration Calibration System Based on DSP
Analysis on Graduate Employment Based on Data Warehouse
Chapter 6: Image and Video Processing
Air Quality Evaluation Based on Local Normalized Image Contrast
Inexact Distributed Reconstruction via Alternating Direction Method
Reasoning Method of Remote Sensing Imagery Based on Topological Transformation
Research on Infrared Thermal Imaging Technique for the Sidewall of LNG Storage Tank
Extraction of the Palm Vein Texture Features Based on Gabor Wavelet Transforms
Facial Expression Recognition Algorithm Based on Gabor Texture Features and Adaboost Feature Selection via Sparse Representation
Facial Expression Recognition Based on Monogenic Binary Coding
HVS-Based Low Bit-Rate Image Compression
A Novel Method of Macro Block Motion Prediction Using Particle Filter
An Effective Multi-Feature Extraction Method for Manually Plotted Well-Log Curve Line
An Image Segmentation Method of Underwater Targets Based on Active Contour Model
Infrared and Low-Light-Level Image Fusion Method Based on Sparse Representation and Color Transfer
Outdoor Navigating Scene Labeling Using Importance Factor Based I-RELIEF and Feature Weighted Support Vector Machines
Removal of Glass Reflection Using TV-Retinex Model
Recognition Method of Cotton Blind Stinkbug Hazard Level Based on Image Processing
Stereoscopic Images Enhancement Based on Edge Sharpening of Wavelet Coefficients
The Bistatic MIMO Imaging Algorithm Based on Waveform Diversity
The Algal Blooms Prediction in the Lakes Based on Remote Sensing Information
The Image Information Recognition of Large Structures Based on CAD Model Characteristics
Topological Equivalence in Multi-Scale Remote Sensing Image Segmentation
Study on Regression Model of Measuring Weld Position
Fast Automatic Failure Detection System Preliminary for LED Lamps Based on Machine Vision Technology
The Change and Management for Surveying Achievement of Real Estate Using GIS Technology
Intelligent Video Surveillance System Based on Sound Source Localization Technology
Decision Method of Optimal X-Ray Digital Imaging Parameters
Gesture Acquisition and Tracking with Kinect under Complex Background
A Novel Approach of Edge Detection Based on Vector Morphology
Edge Detection of Color Images Based on Improved Morphological Gradient Operators
The Filtering and Streamline of Three-Dimensional Point-Cloud Data
Chapter 7: Structural Engineering Analysis, CAD Optimized Design and Intelligent Control
Compressive Strength Analysis of MWD Microchip Tracer
Analysis of Mechanical Fatigue Behavior for MEMS Structures
LNG Tank Dome Air Raising Technology Research Based on Closed-Loop Tension Control
Feature Based Parametric Design of Piston Reliability
Numerical Study on Effect of Wall on Upwelling Flow
Influence of Technical Parameters on Contact Pressure in Straight Bevel Gear Meshing
Modeling of Electrostatic Chuck and Simulation of Electrostatic Force
Optimization of Flame Arrester Structure of Explosion-Proof Valve with Flame Arrester for Diesel Engine
Chapter 7: Structural Engineering Analysis, CAD Optimized Design and Intelligent Control
Research of a Dynamic Vibration Absorber with Tunable Resonant Frequency and its Vibration Attenuation Characteristics
Research on Finite Element Static Analysis in Mechanical Vehicle Structure Design
Research on Vault Plate Installation Technology of LNG Storage Tank
Seal Optimization Technology Research of Large LNG Storage Tank Dome Gas Lift
Study on Elevator Drive System Dynamics Simulation of Rail Transport Conveyer
Transmission Efficiency Analysis and Experiment Research on Screw Oscillating Hydraulic Cylinder
Multiple Instance Space Description Method in the Application Research of Complex Product Conceptual Design
Design of Multi-Mode PID Controller and Application in Time-Delay Process
Remote Household Appliance Control System Based on Internet
The Simulation Investigation of Matlab in Intelligent Control Course
Blast Vibration Response of Tunnel Influenced by Confining Pressure and Surrounding Rock Type
Chapter 8: Design and Control in Modern Engineering System
Optimal Power Management of Final Load and Electrolyser in a Solar Hydrogen Power Generation System
Design of MFL Inspection Device for Underground Oil Tanks Based on Independent Calibration Method
Design of Absorbing Wave Maker Control System Based on Trio Controller
Design of a Chaos Phenomenon Exhibition System
Dynamic Modeling of a New Version of Cylindrical Planetary Gear Used for a Robotic Arm
Modular Design Based on Design Rules
Study on the Automatic Spraying System of Dust Suppressant and Speed Adaptive Algorithms
Dynamic Motion and Modal Analysis Simulation for the Balance Mass of the Crankshaft of a Two-Cylinder Reciprocating Air Compressor
Research and Design of Shortwave and Ultra-Short Wave SDR Engineering in Urban Emergency System
Chapter 9: Modern Circuits and Embedded Systems
Design of the Embedded Control System of Laser Engraving Machine
Research of IOT in the Application of Wisdom Agricultural
Research of RAM on the All-Electronic Computer Interlocking System
The Research on Embedded Database System of Wireless Network
The Effect of Dielectric Charging on Capacitive MEMS Switch
Drive Characteristic Analysis and Test System Design for Water Hydraulic Artificial Muscle
A Type of Equipment TV Goniometer Angle Deviation Signal Simulation Research
Design of a New Dual-Core Intelligent PLC for Ethernet Communication
Design and Implementation of an Automatic Hydrological Telemetry System
IC Design of the Band-Gap Reference and the Triangular Waveform Generator of Class D Audio Amplifier
Improvement and Design of Single Coil Vibrating-Wire Sensor Signal Acquisition System Based on STM32
Study on Energy-Saving Electronic Water Treatment Facility with Automatically Adjustable Operating Voltage
Chapter 10: Industrial Engineering
Application of Three-Dimensional Fine Geological Modeling in Complex Fault-Block Reservoir with Low Permeability
Maintenance and Repair Management and Optimization of Aircraft Base on Working Hour Standard
Decentralised Sanitation and Energy Reuse in the Built Environment
The Empirical Research on Industry Informatization
Incomplete E-V Distribution for Shannon Entropy
Manufacturing Defects and Safety Technology of Automobile Product
Study on Seepage Control Measures of Plain Reservoirs Based on Soil Salinization after Dam
Research on SSCR Technology to Reduce NOx Emissions for Diesel Engines
A New Technique to Improve Estimation of Position for Serial Robots
An Automatic Golf Ball Recycling Robot Design
Multi-Robot System for Mapping of the Unknown Environment
Optimal Method on the Compensation for Inverse Kinematics of Robot
Research on Ping-Pong Balls Collecting Robot Based on Embedded Vision Processing System
Multi-Sensor Technique-Based Integrated Navigation and Flight Control on Aerial Robot
Chapter 12: Optimization and Control Algorithms
An Approach to Command and Control Group Decision-Making Based on Intuitionistic Fuzzy Set
Analytic Optimization of Implemented Discrete Time for Kalman Filter during Stationary North-Finding
Dynamic Deployment of Wireless Sensor Networks by an Improved Artificial Bee Colony Algorithm
Application of Supervisory Predictive Control Based on T-S Model in pH Neutralization Process
Research on Classification Effectiveness of the Novel Mamdani Fuzzy Classifier
Delay-Dependent H∞ Filtering for Neural Networks with Time Delay
A Novel Infrared Landmark Indoor Positioning Method Based on Improved IMM-UKF
A Two-Stage Optimization Algorithm of Logistics Transportation Network
Algorithms of Admission Control and Batch Scheduling of On-Demand Broadcast with Deadlines
An Improved PD Type Iterative Learning Control Algorithm Based on Wavelet Filter
Weighted K-Means Clustering Analysis Based on Improved Genetic Algorithm
Finite-Time Formation Control for Autonomous Underwater Vehicles with Limited Speed and Communication Range
Neural Network Ensemble Based on Clonal Selection Algorithm for Sneak Circuit Analysis
Research of Routing Protocol for Wireless Meter Reading System
Research on Automatic Identification of Substation Circuit Breaker Based on Shape Priors
Research on Particle Swarm Optimization Least Square Support Vector Machine for Short-Term Wind Speed Prediction
Retrieval and Matching of Case Based on Gray-Relational Theory
Segment Matching Gesture Recognition Algorithm and its Application in Smartphone
Study on Chaotic Time Series Prediction Algorithm for Kent Mapping Based on Particle Swarm Optimization
Study on Elman Neural Networks Algorithms Based on Factor Analysis
Accelerate Convergence Rate of Distributed Consensus Algorithm with Optimized Topology
Research on Low Speed Serial Links Transmission Optimization Technology
An Improved Pure Pursuit Algorithm for Four-Wheel-Steering Autonomous Driving Vehicle
Estimation of Origin-Destination Demand Matrix for the Urban Multimodal Traffic Network
New Cascadic Algebraic Methods for the Second Order Elliptic Problems
Optimization Model of Minimum-Cost-Based Maintenance Schedules for Railway Signal Equipment
Chapter 13: Control System Modeling and Simulation Technology
4-DOF Dynamic Model of the Container Crane Spreader
Chaos Control for the Unified Chaotic Systems
Based on PLC Control of Double Constant Pressure No Tower Water Supply System Design
Function Projective Synchronization in Complex Networks with Stochastic Effects via Hybrid Feedback Control
Current Sensor Active Fault Tolerance Control Based on Feedback Gain Reconfiguration
Nonlinear Adaptive Tracking of the Steward Platform in Task Space
Nonlinearity Mode Theory Foundation Research of EMP Coupling by Volterra Series
PI Terminal Sliding Mode Control of Theodolite Aiming Chaotic Motor with Time Varying Parameters
Research on Control of Low Gravity Simulating System
Research on Fuzzy Control Method of Hybrid Maglev System
Research on the Jet Flow Control Technology in LNG Liquid Charging Process
Study on Safety & Protection Ability of GNSS Receiver from the View of Main Materiel System
The Application of Temperature & Humidity Independent Control Air-Conditioning System Based on the Ground Source Heat Pump
The Steady State Precision Control of DC Linear Motor Based on State Observer and Feedback
The Tensor Product Based Analytic Solutions of Nonlinear Optimal Control Problem
The Application of Negative Feedback to Active Control in Vibration Isolation
Vertex Stability of Grey Discrete Dynamic Systems
Second-Order Flocking Control with Communication Noise
The Design of Pressure Regulating System for Large LNG Storage Tank Dome Gas Lift
Control Strategy Design and Validation for EV Based on Rapid Prototyping Platform
Analysis and Research of the Automated Warehouse Management and Control System
Control of BESS Using Frequency-Linked Pricing with High Wind Penetration
Chapter 14: Electric Automation, Control, Design and Analysis
A Novel Sliding-Mode Observer for Doubly-Fed Induction Generator
Constant Pressure Water Supply System Based on Fuzzy Control Technology
Design of the Metal-Welder Ultrasonic Transducer by Using Finite Element Analysis
Research on the Force-Position Switching Control System of Wire Bonding Head on DSP
Application of Siemens S7-300 PLC in the Thermal Power Plant Flue Gas Desulfurization Control System
Evaluation Method of Voltage Stability Based on Minimum Singular Value
Remote Control of an Agricultural Robot and Tests
Study on Real-Time Control of Power System Stability
The Design of Phase Shift Soft Switching Full-Bridge Converter Power Supply Based on UCC3895
The Assessment of Transformer Status Based on Gray Theory
The Design of Vortex Flowmeter
Function Design of Body Control Module and its Test Validation
Chapter 15: Software, Computer Applications and Numerical Methods
Blind Recognition for Rate below 1/2 Binary Cyclic Codes
An Efficient Micro-Payment Protocol Based on a Single Hash Chain
Server Design of Personal Cloud Sync Storage System
Efficient Pattern Matching Algorithm for Intrusion Detection Systems
Research and Proof of Decidability on Self-Similar Fractals
Research on Automatic Test Method of VMF Codecs
The Research on Cloud Computing Security Model and Countermeasures
Research on Data Security of Mobile Payment App
Enhancement of Test Platform for Web Application Security
Sensibility Analysis of Strengthened Operational Profile
Software Reliability Verification Testing Program Considering Hyper-Parameter
Trusted Control Flow Integrity for JVM-Based Application
Research of Communication Method of Intelligent Building Lighting System Based on CAN Bus
Software Implementation of Kompella-Based L2VPN
The Estimation of the Hausdorff and Fractal Dimensions of the Global Attractor for 2D Autonomous g-Navier-Stokes Equations
Model of Supply Chain Disruption Risk Defense System
Research on Security Risk Assessment Model of Smart Mobile Terminals
Sensors, Mechatronics and Automation
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
