Description
The 49 peer-reviewed papers collected here together offer a plenitude of up-to-date information on “Advanced Fossil Fuel Energy Technologies, Hydrogen Production and Storage, Fuel Cells, Electrochemical Energy Storage Systems”. The papers are conveniently arranged into MATERIALS FOR ADVANCED FOSSIL FUEL ENERGY TECHNOLOGIES, MATERIALS IN HYDROGEN PRODUCTION AND STORAGE, Hydrogen Production, Hydrogen Storage, FUEL CELLS: MATERIALS AND TECHNOLOGY CHALLENGES, MATERIALS IN ELECTROCHEMICAL ENERGY STORAGE SYSTEMS.
This special volume has also been published online in the series, “Advances in Science and Technology” Vol. 73 via www.scientific.net.
The Forum generated five volumes of proceedings, and this first one documents four symposia on the topics listed in the title, devoting a section to each. Among the topics are the computational and experimental design of novel high-temperature alloys, effects of firing conditions on the coal ash fusibility test, fabricating thin and thick films of photocatalytic titania, a thermodynamic database for hydrogen storage materials, fine controlled metallo-dendrimers for advanced nano-catalysts, the status and challenges of molten carbonate fuel cells, applying carbon nanotubes in lithium-ion batteries, and ionic liquid binary mixtures for low-temperature applications.
Chapter
Computational and Experimental Design of Novel High Temperature Alloys
Comparison of High Temperature Mechanical Behaviour and Microstructure of the New Gamma–TiAl8Ta with Gamma-TiAl8Nb Alloy
Elaboration and Characterization of the Properties of Refractory Cr Base Alloys
Refractoriness, Microstructures and High Temperature Oxidation of TaC-Reinforced Iron-Based Alloys Protected by Chromium-Rich Coatings
Hydrogen Uptake and Hydrogen Profiles in Chromia Scales Formed on Ni25Cr(Mn) in Low pO2 Test Gases at 1000°C
Self Diagnostic EB-PVD Thermal Barrier Coatings
A CFD Model of Erosion-Corrosion of Fe at Elevated Temperatures in Aqueous Environments
Effects of Firing Conditions on the Coal Ash Fusibility Test
Supported Oxygen Transport Membranes for Oxyfuel Power Plants
Water Gas Shift Reaction in Pd-Based Membrane Reactors
Ceramic Membranes in Carbon Dioxide Capture: Applications and Potentialities
SECTION II – MATERIALS IN HYDROGEN PRODUCTION AND STORAGE
Two-Step Thermochemical Cycles for High-Temperature Solar Hydrogen Production
Selection of Ceramics and Composites as Materials for a Supercritical Water Gasification (SCWG) Reactor
High Temperature Water Electrolysis Using Metal Supported Solid Oxide Electrolyser Cells (SOEC)
Fabrication of Thin and Thick Films of Photocatalytic Titania
Evidence for Hydrogen Transport in Deuterated LiBH4 from Raman-Scattering Measurements and First-Principles Calculations
Proton Vibrations in Lithium Imide and Amide Studied through Incoherent Inelastic Neutron Scattering
Hydrogen Desorption Reactions of the Na-Mg-B-H System
Metal Hydride-Based Composite Materials with Improved Thermal Conductivity and Dimensional Stability Properties
Innovative Systems for Hydrogen Storage
Nanonickel Catalyst for Kinetic Destabilization of LiAlH4 (Lithium Alanate) for Facile Discharge of Hydrogen
Hydrogen Storage on Beryllium-Coated Toroidal Carbon Nanostructure C120 Modeled with Density Functional Theory
Simple and Binary Hydrogen Clathrate Hydrates: Synthesis and Microscopic Characterization through Neutron and Raman Scattering
Numerical Simulation of Hydrogen Dynamics at a Mg-MgH2 Interface
Thermodynamic Database for Hydrogen Storage Materials
Environmental Reactivity of Solid State Hydride Materials: Modeling and Testing for Air and Water Exposure
SECTION III – FUEL CELLS: MATERIALS AND TECHNOLOGY CHALLENGES
Feasibility of Liquid Fuels for SOFC with Ni-Base Anode
Fabrication of an Intermediate-Temperature Anode-Supported Planar SOFC Via Tape Casting and Lamination
Improving the Oxidation Resistance of Fe-Cr-Mn Interconnector of Solid Oxide Electrolyte Fuel Cell with the Addition of Trace Elements
High Temperature - FTIR Characterization of Gadolinia Doped Ceria
A Novel Anode Based on Ni-Modified Perovskite for Direct Alcohol Solid Oxide Fuel Cells
Fine Controlled Metallodendrimers for Advanced Nano-Catalysts
Hybrid Membranes for Proton Exchange Fuel Cell
Investigation of a Passive DMFC Mini-Stack at Room Temperature
Pt Alloys on Carbon Nanostructures as Electrocatalysts for Direct Methanol Fuel Cell
Status and Challenges of Molten Carbonate Fuel Cells
Solutions for Material Corrosion Problems in MCFC
SECTION IV –MATERIALS IN ELECTROCHEMICAL ENERGY STORAGE SYSTEMS
Study of Carbon Nanotubes for Lithium-Ion Batteries Application
Sago Gel Polymer Electrolyte for Zinc-Air Battery
Solid State and Aqueous Li-Ion Batteries with Polyanionic Electrode Active Materials
Ionic Liquid Binary Mixtures for Low Temperature Applications
Nanostructured Anode Material for Li-Ion Batteries
Energy Conservation and Management Strategies for Commercial Li-Ion Batteries in Telecommunication Applications
Printed Supercapacitor as Hybrid Device with an Enzymatic Power Source
A Molecular Dynamics Study on Pressure Dependence of Ag Diffusion in Ag3SI
A Chemical Bonding Approach to Ionic Conduction and Thermal Expansion in Oxide Ion Conductors
5th FORUM ON NEW MATERIALS PART A
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
