Chapter
Study on a Novel Soften Curing Agent for Toughening Epoxy Resins
The Microstructure and Nanocrystallization Behavior of Cu-Zr-Ti-Al Bulk Metallic Glass Matrix Composites
Study on Titanium Carbide Particles Reinforced High Manganese Steel Composite
Preparation and Optical Properties of Carbon Fiber/ZnO Core-Shell Structure by a Simple Method
Synthesis of VN-Reinforced Iron-Based Composite
Effects of Mg, Si and Multiple Rare Earth Addition on Microstructures of Al3Ti /A356 Composites
Synthesis, Characterization and Photocatalytic Activity of AgCl Loaded on TiO2/SBA-15 Composites
Synthesis and Characterization of Cu/Polypyrrole Nanocomposites
Performance of Modified Aramid Fiber Reinforced Phenolic Foam
Effect of CNTs on Properties of Cu-Based Composites and Mechanism
Study on the Electrical Arc Ablation Performance of Al2O3 Reinforced Cu-Matrix Composites
Investigation of Structure and Mechanical Behavior of Polyamide 6/ZnO and Polyamide 6/Al2O3 Nanocomposites
Effect of Water on Friction and Wear Performance of Bamboo Fiber Reinforced Resin Matrix Composites
Effect of the Interface Control Process of Wood Fiber/PLA on Properties of Composites
Study on Mechanical Property of Conch Powder Reinforced Polyethylene Composite
Influence of Ammonium Hydroxide Treatment on Structural Stability of Polyaniline/Multi–Walled Carbon Nanotube Nanocomposites
Preparation of Conductive PANI/Modified CIP Composites via In Situ Polymerization
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS
Thermal and Mechanical Properties of Poly(methyl methacrylate) Nanocomposites Containing Polyhedral Oligomeric Silsesquioxane
Research of Preparation Process of Amorphous Composite Phase Change Material by Orthogonal Test Method
Manufacturing and Functions of Bamboo Charcoal/Stainless Steel Composite Fabric
Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites
Temperature Sensor Anti-Sunlight Radiation Shield Material
Influence of Double-Doped Admixtures on Asphalt Mixture Performance
Preliminary Study of Polypropylene/Sawdust Green Composite
Preliminary Study of Polypropylene/Coir/Carbon Black Conductive Wood Plastic Composite
Investigation of the Microcellular Foaming and Diffusion of Supercritical Carbon Oxide in the Polypropylene/TiO2 Nanocomposites
Influence of Interfacial Property on Failure Mode of Unilateralism Carbon Fiber Reinforced Resin Matrix Composite Subject to Short-Beam Shear
Anti-Penetration Performance of Ceramic Composite Armor Analysis Based on the Unified Strength Theory
The Effect of Fillers on Chrome-Based Wave-Transparent Material Matrix
Preparation and Infrared Emissivity Study of Optically Active Polyurethane/Multiwalled Carbon Nanotubes Nanocomposites
Analysis on Stability of Dongchuan Landslide and the Comprehensive Management Measure
In Situ Polymerization and Characterization of Poly(ε-caprolactone)/Layered Double Hydroxide Nanocomposites
A Study on the Behavior Characteristics of Curved FRP-Concrete Composite Panel
Study on the Process for Fabricating Fly-Ash Floating Beads Particle Reinforced Aluminum Foam Matrix Composite
Effect of Post-HPT Heat Treatment on the Mechanical Performance in Ti/Cu-Cr/S20C Clad Materials
Carbonyl Iron/Graphite Double-Layer Structural Absorbing Composite
Study on Novel Structure of Yttrium Complex: C4H12K2O22S2Y2
Preparation and Characterization of Sodium Lignosulfonate/PCL Composite
Study on Novel Structure of Gadolinium Complex: Gd (C3 H6O9)
Effect of LaPO4 Partile Size on the Thermal Shock Resistance of ZrO2 Ceramics
Synthesis and In Vitro Bioactivity of Hydroxyapatite/Polyamide66 Nanocomposite
Research on the Conductivity of Carbon Nanotube/Mica Composite Powder in the Epoxy Resin
Properties of Conductive Polyaniline/Boron Carbide Composites
Chapter 4: Micro/Nano Materials
Mechanical Properties and Microstructure of Two- Layered Cu-Ni-Zn/Cu-Cr Material Joined by Diffusion Bonding
Research on Adsorption of Methylene Blue onto the Mesoporous Silica Microspheres
Preparation and Characterization of Folate-Targeted Chitosan Nanoparticles Loaded with Hydroxycamptothecin
In Situ Flame Synthesis of Polyhedral Nickel Oxide Nanoparticles on Carbon Fibers
Wet Chemical Synthesis of Ni-Al Nanoparticles at Ambient Condition
Catalytic Hydroxyl Radical Generation by CuO Confined in Multi-Walled Carbon Nanotubes
Preparation and Characterization of Electrospun CPVC Nanofiber Nonwovens
The Preparation and Structure Characterization of Nano-Alumina Fiber Doped Cerium by Electrospinning
Application of Nanometer Materials into Badminton Racquet Strings
The Nanocrystallinity Enhancement and Optical Characteristics of Pre-Hydrothermally Treated ZnO Nanoparticles
Preparation, Purification and Properties of Carbon Nanotubes
Preparation of Carbon Nanotube / Polymer Composites
The Microcapsules Production by Supercritical Fluid Impinging Technology Combines with Fluidized Bed
Hydrothermal Synthesis of Tetragonal Phase CuInS2 Nanoparticles
Preparation and Damping Properties of Cups-Stacked Carbon Nanotubes(CSCNTs)/Prime 20
Synthesis, Characterization of Pr-TiO2 Nanoparticles and their Photocatalytic Mechanism
Effect of Mechanical Stresses on Coercive Force and Saturation Remanence of Ensemble of Dual-Phase Interacting Nanoparticles
The Interfacial Cohesive Law of Composite for Carbon Nanotubes and Single Crystal Metals
Advances in Model Development for Carbon Nanotube Assembly by Dielectrophoresis
Study on Ni Nanowires Prepared in AAO Template
Preparation and Properties of the Polystyrene/Alumina Nanocomposites
Controlled Growth of Germanium Nanowires via a Solid–Liquid–Solid (SLS) Mechanism
A Progress in Gold Nanoparticles: Adsorption Behavior
Tribological Properties of PTFE Nanocomposites Filled with Alumina Nanoparticles
UV Resistance of γ-Glycidoxypropyltrimethoxysilane / TiO2-ZrO2 Hybrid Nanocomposite Films Prepared by Sol-Gel Method
Synthesis of Carbon Nanotube and Carbon Nanofiber in Nanopore of Anodic Aluminum Oxide Template by Chemical Vapor Deposition at Atmospheric Pressure
Solvthermal Synthesis of CeO2 Hollow Nanospheres
Preparation of Ultrafine Polyethylene-Silica Composite Particle with Core-Shell Structure
Assessment of Nanocatalyst Dispersibility in a Polymer by Employing Relative Standard Deviation
Enhanced Heat Conduction in Cellulose Nanocrystals Grafting Polyethylene Glycol as Solid-Solid Phase Change Materials
Synthesis and Characterization of Nanocrystalline Ceria Powder through Homogeneous Precipitation Method
Size Controlled Synthesis of 2-6 nm Gold Nanoparticles via Controlling Concentration of the Reducing Agent and Temperature
Hydrothermal Synthesis and UV Absorption Property of Firewood-Like CeO2 Nanostructures
Preparation of Polyvinylpyrrolidone (PVP) Nanofibers Supported CaCO3 Nanoparticles
Preparation of Fe-Mn Oxide Nanoparticles inside Carbon Nanotubes
The Effect of Amino-Functionalization on the Structure and Properties of MWNTs
Constitutive Model of Epoxy Resin Filled by Nano-Rubber Particles
Collection Rate of Cu-30wt%Ag Alloy Nano Particle Prepared by Induction Plasma with Different Power
Preparation and Characterization of Nanoenergetic Materials Based on KNO3-Filled Carbon Nanotubes
Effect of Different Post-Treatment on the Morphology, Structure and Property of Electrospun SF Nanofiber Mats
Self-Assembly Behavior of N-Methly-N-Hexadecyl-Pyrrolidinium Bromide in Water
Synthesis of Bismuth Oxide Nanoparticles by a Templating Method and its Photocatalytic Performance
Preparation of Uniform Microcapsules Containing Ionic Liquid for Caprolactam Extraction
Synthesis and Characterization of Sliver Nanoparticles in KH-550 DMF Solution
Synthesis of Porous Cubic Nickel Oxide Nanostructures and their Electrochemical Property
Performance Optimization of Nanotubes Prepared by a Template Synthesis Method
Sorption of Atrazine (AT) on Nano-SiO2 and Nano-Kaolinite
Synthesis and Characterization of Nano-Sized AlN Powders by CRN Route from a Sol-Gel Low Temperature Combustion Precursor
Effects of Length Fluctuation on Damage Spreading in a Triangular Nanowire Array
An Innovative Method to Reduce Percolation Threshold of Carbon Nanotubes Filled Nylon6/Polystyrene Blends
Chapter 5: Optical/Electronic/Magnetic Materials
Microstructure and Magnetic Properties of the CoTiO2 Thin Films
A Meso-Substituted Tripyrrin Metal Complex as the Candidate for Fluorescent Material
A Facile Synthesis of DNA-Magnetic-Fluorescent Composite Particles
Luminescent Properties and Mechanism of Gd1-x-yAlO3:Tbx,REy Gradational Combinatorial Library
Spin-Glass Behavior and the Magnetic Relaxation Effects in Nd0.90Sr0.10CoO3
Deoxycholate-Assisted Photochirogensis of Silver Nanoparticles
Strong Green PL Emission of Sol-Gel Derived Tb3+-Ce3+ Ions Co-Doped SiO2 Matrix Nanocomposites
Effect of La Doping on Structural and Magnetic Properties of SrLaxFe12−xO19 Ceramics from Aqueous Solution Method
Diffuse Reflectance Light on Surface of Biological Material
Morphology and Dielectric Property of Cellular Polyimide Films Prepared by Phase Inversion
A Novel Red Phosphor (Sr0.68Ba0.3)4Al2O7: Eu3+ for UV Light-Emitting Diode Application
Design and Synthesis of Fluorescent Betahistine Conjugates with Unique Imaging Property
Preparation of Magnetic Polyglycidyl Methacrylate Microspheres
Synthesis and Characterization of Blue Light Emitting N,N-Dimethylpyren-1-Amine and its Vinyl Polymer
A Fluorescence pH Sensor Based on Fluorescence Resonant Energy Transfer from Gold Nanoclusters to Porphyrin
Concentration Phase Transitions in Two-Sublattice Magnets
Magnetic States of Heterophase Particle in the Field of Mechanical Stresses
A Study on the UV- and Thermo- Stability of Organosilane-Functionalized Carbon Dots Films
Synthesis and Photochromic Properties of 1-(Thien-3-yl)-2-(thien-2-yl)ethene Having Bromo at 4-Position of Thiophene Moieties
Fabrication and Characterization of OLED with Magnesium Complex of Benzimidazol-2-Yl Pyridine as Emission Layer
Preparation and Photophysical Properties of Two-Photon Absorption Materials Containing Quinoline Ring as Electron Acceptors
The Hydrothermal Synthesis of β-ZnMoO4 for UV or Visible-Light-Responsive Photocatalytic Dedradation of Victoria Blue R
The Preparation and Research of β-Chitosan/HA Composite Magnetic Microspheres
Study on ZrC-20vol.%SiCw Ultrahigh Temperature Ceramics by Hot Pressing
Ca3Sc2Si3O12:1%Ce3+, x%Ba2+ Green Phosphors for White Light-Emitting Diodes
The Tuning Color of Red Electroluminescence Based on Eu-Complexed Bis(2-(diphenylphosphino)phenyl)ether Oxide
Similarity Evaluation for Magnetic Materials Sintering
Influence of Sr2+ Doping Quantity on Microstructure and Magnetic Performance of Z Type Hexagonal Ferrite
Novel Ag@Ag3PO4: A Highly Efficient Photocatalyst under Visible Light
Synthesis and Photo-Initiating Properties of a Quaternary Ammonium Salts Photoinitiator with Ionic Liquids Structure
Chapter 6: Building Materials and Structural Mechanics
On the Principle and Application of Concrete Admixtures
Application and Curing Mechanism of Soil Stabilizer
Research on the Relationship between the Thickness of the Hard Strata and the Roof Caving Hidden Danger Level
Waterproof and Impermeability Technology Strategy of Constructional Engineering
Numerical Examples of Variable Cross-Section Beam Elements
Analysis of Collapse Vibration Action of Air-Interlayer Structure for Explosive Resistance
Finite Element Analysis of the Biaxial Tensile Specimen of Woven Architectural Membrane Material
Numerical Simulation Analysis on Lengthwise Graphitization Furnace Co-Production Silicon Carbide
Preparation of Construction Bricks from Iron Ore Tailings
Study on Compound Modification of Sodium Silicate
The Research on SEAM Modified Asphalt under Low Temperature
Pilot Tests for the Comprehensive Utilization of Coal Refuse to Produce Alumina and Cement Clinker
The Effect of Temperature on the Mechanical Properties of CA Mortar
A Preliminary Study on Class F Fly Ash-Based Geopolymers Formed by Pressure as Acid-Resisting Bricks
Adsorption Behavior of Naphthalene Sulfonate Formaldehyde Condensate with Different Molecular Weights on the Cement Particle Surface
Effect of Composition of Calcium Lignosulfonate on Setting of Portland Cement with Anhydrite
Preparation and Properties of a Novel Ash-Calcium-Powder Internal Wall Coating
The Adsorption and Dispersion Performance of Superplasticizers on Cement Particles
Warm-Mix Asphalt Pavement Performance and Energy-Saving Analysis Based on Crushing Bass
Microstructure Analysis of Soil Consolidation Material
The Effect of Modified Straw on Microstructure of Soil Consolidation Material
Study on Application of Botanic Crumbed Rubber Asphalt in the Field of Road Building
Leaching Characteristics of Cement-Fly Ash Pastes
Chapter 7: New Materials and its Applications
Sintering Behavior and Microwave Dielectric Properties of 95MCT Ceramics Prepared from Different Size Powders by Sol-Gel Method
Grey Clustering Analysis of the Comfort Properties of Bamboo Pulp/Cotton Interwoven Fabric
Preparation of Hollow Carbon Spheres with Large Size and High Specific Surface Area from Phenolic Resin
Preparation and Properties of Antibacterial Functional PET Fibers with Ag-Loading MWNTs
Effects of Chitosan-Based Coating and Modified Atmosphere Packaging (MAP) on Browning of Sweet Persimmons (Diospy kakiLinn.f)
Effect of Viscosity Stabilizer on the Properties and Structure of Raw Constant Viscosity Rubber
Flame Retardancy Modification of Wool Fabrics Using a Vinyl Phosphorus Monomer
Synthesis of Novel g-C3N4/Bi2WO6 Composite with High Visible Light Photocatalytic Activity
Application and Mechanism Study of a Novel Copolymer for Filter Aids on Wet-Process Phosphoric Acid
Research on the Influence of Stiffness of Copolymer(N-Tert-octylacrylamide/Acrylic acid/Methyl methacrylate/Butylaminoethyl Methacrylate/Hydroxypropyl Methacrylate) by Methyl Methacrylate and N-Tert-Octylacrylamide
Synthesis and Characterization of a Novel Linear Benzoxazine-Containing Polytriazole via Metal-Free Click Reaction and its Self-Crosslinking Behavior
Development of Outlast Fiber and Study about its Character of Thermoregulation
Actinozoan-Like Carbon Materials Prepared via a Solvothermal Route
Preparation of Denatured Alcohol-Modified SPI-Based Adhesive
Thermal Stability of a Novel Polytriazoleimide
Studied on Preparation Montmorillonite Modified by CTAMB and Adsorption Performance on Nitrobenzene
Preparation of Bone Glue Adhesives Using Epichlorohydrin Modification
Rheological Properties and Microstructures of Thermo-Sensitive Microemulsion-Based Gels
Study on the Removal of Algae with Hexadecyl Trimethyl Ammonium Bromide (CTAB) Modified Rectorite
Preparation of Cellulose-Graft Superabsorbent Resin
Preparation of Cellulose-Graft Water Retaining Agent: Effect of Reaction Temperature and Initiator
Research on the Performance of Functional Alginate Fiber
The Synthesis and Electroluminescence Properties of 4-Benzofuranyl-1,8-Naphthalimide Derivatives
Ultrasonic Wave Assisted Preparation and Properties of SiO2 Aerogels by Fractional Modification
Investigation on Microstructure and Phase Transformation of La Added Ti49.3Ni50.7 Shape Memory Alloy
The Primary Study on PP/Sawdust/PU Sound-Absorbing Plank
Synthesis of Starch-Graft-Polyacrylamide by Salt Solution Media Polymerization
The Interlaminar Tensile Strength of Mesophase Pitch-Unidirectional Carbon/Carbon Composites Adding Natural Flake Graphite
Photocatalytic Removal of Cu(II) Ions from Water Using TiO2-Modified Bamboo Charcoal
Synthesis and Mesomorphism of a Novel Triphenylene-Based Discotic Liquid Crystal with Chiral Chain
Research on Rubber/SBS Modified Asphalt by MSCR Test
Manufacture and Application of PAE as Wet Strength Agent
Synthesis of Carbazole Modified Glass Plate for Detecting Nitroaromatic Compounds
Preparation of Triethylenetetramine-Functionalized Adsorbents for Selective Adsorption of Copper and Zinc Ions
Effect of Different Clay of Attapulgite and Montmorillonite on the Superabsorbent Based on XG-g-PAA
Synthesis of Bis-(Tributyl citrate acid)esters as Novel Green Plasticizers
Rheological Properties of PAN and Silk Fibroin in Aqueous NaSCN Solutions
Research Progress of Adsorption Characteristics of Polycarboxylate Superplasticizers and Effect on Cement Dispersion, Hydration
Study on a Type of Environment-Friendly Underground Wet Shotcrete Support Materials
Adsorption of Methylene Blue on Starch Microsphere from Aqueous Solutions
Study on the Performance of Blended Yarn with Outlast Air-Conditioning Viscose Fiber
Transient Absorption Properties of 1, 8, 15, 22-Tetra-N-Pentyloxy Metallophthalocyanines and Metal Free Phthalocyanine
Wet Blending of Pregelatinized Starch and Poly(butylene succinate)
Lead(II) Adsorption by Raw and Acid-Activated Vermiculite
Tribological Properties of Oleic Acid Capped Copper Nanoparticles Prepared by the Solventless Thermolysis of Single-Source Precursor
Preparation of Green Solar Reflective Coating with High Infrared Reflectivity
Experimental Research on Characteristics of Long-Wave Infrared Material Pb1-xGexTe
Preparation of N-Methylpolyborosilazane -Derived Bulk Si-B-N-C Ceramics by Warm-Pressing and Pressureless Pyrolysis
Preparation and Properties of Silicon-Containing Arylacetylene Resins with Octa(maleimidophenyl)silsesquioxane
Mechanical Properties of Oxidized Zr-1Nb-0.7Sn-0.1Fe Alloy Nuclear Cladding Tubes at High Temperatures
Mechanical and Microstructural Analyses of Three Layered Cu-Ni-Zn/Cu-Zr/Cu-Ni-Zn Clad Material Processed by High Pressure Torsioning (HPT)
Chapter 8: Energy Materials and Energy Storage Materials
Electrochemical Hydrogen Storage Performances of the Nanocrystalline and Amorphous Mg2Ni-Type Alloys
Synthesis and Electrochemical Properties of a Novel Aniline-Based Polyorganodisulfide
Identification of Functional Groups of Sustainable Bio-Oil Substrate and its Potential for Specialty Chemicals Source
Effects of Foaming Condition on the Performance of Bituminous Coal-Derived Carbon Foams
Thermal Properties of SMA-g-PEG as Novel Form-Stable PCMs for Thermal Energy Storage
The Study of Contamination and Coarsening in Sintering Silicon Powder
The Development of Conductive Pastes for Solar Cells
Facile Preparation of Microporous Carbons with High Specific Capacitance from Coal Tar Pitch for Supercapacitors
Investigation on Electrical Performance of Tubular Cathode for Direct Ethanol Fuel Cell
Hydrothermal Synthesis of Lithium Titanate as Anode Materials for Lithium-Ion Batteries and its Performance at Different Charging and Discharging Mode
Effect of Cobalt Loading in Nitrogen-Doped Carbon on Oxygen Reduction Reaction for PEM Fuel Cells
Electrical Conductivity and Phase Transition of Solid Oxide Fuel Cell Electrolyte La2Mo2-xTixO9-δ Ceramics
Chapter 9: Material Forming, Machining and Joining
Microstructure, Mechanical and Degradation Properties of Extruded Pure Mg for Biomedical Application
Design of Time-Lapse Core-Pulling Mechanism with Side Slide in Die-Casting Die
Research on the Cutting Properties of SiC/Cu Composite
Analysis of Multiple Open Hot Die Forging for a General Cylinder Based on Numerical Simulation
Ag Behaviors of Ag-Al Alloy Annealed in Air Atmosphere
Determination of Multiple Heat Flux at the Metal-Mold Interface during Casting Solidification
Development of High High Chromium Steel Tube Steel by Converter-Bloom Continuous Casting Process
Study on the Surporting Mechanism of Precision Turning Process of Big-Diameter Length Rate Shaft by the Top
Mechanical Behavior of Overlap-Welded of Dissimilar Steels (Structural-Stainless) under Monotonic Load
Effect of Heat Input on Microstructure and Hardness of SKD 61 Hot Work Tool Steel Using Gas Metal Arc Welding
Effect of Annealing Temperature on the Transformation Temperature and Texture of Ni47Ti44Nb9 Cold-Rolled Plate
Study on Squitter Pulsed Welding Repairing Technology of ZL105 Alloys
The FEM Dynamic Simulation in the Drilling Process with Indexable Inserts
FEM Analysis of the Cracks Formation and Control in SV Plates
Formation Mechanism of Hydrogen-Induced Delayed Cracking in Weld Center of High-Strength Steel
Cold Bending Properties of Under-Matched Butt Joints for High Strength Steel
Ultrasonic Welding of Glass Fiber Reinforced Polypropylene
FEA of Temperature Profile in the Ultrasonic Welded Joint
Fabrication of Microchannels on SiC Substrate by Femtosecond Laser
Research on Lagging Melt Phenomenon and Influencing Factors of Flux Cored Arc Welding
Thermal Coupled FEM Analysis of Precision Roll Forging Performing of Automobile Front Axle
Area of Modification within Transparent Materials by Femtosecond Laser
Design of Injection Mould with Thread Automatic Demoulding Mechanism for Focusing Handwheel
Study on the Microstructure and Texture of Warm Rolled ZK60 Magnesium Alloy Sheet
Analytical Model Study of Ellipse Crank Arm Final Upset Forging Force on Slab Method
Microstructure and Properties of High-Energy Pulsed Cold-Welded Surfacing Layers on 18Cr2Ni4WA Steel
Microstructure of the Dissimilar Materials TIG Welding Joint of Mg-8Li Alloy/Al Alloy
Influence of the Process Variables on the Temperature Distribution in AISI 1045 Turning
Calculation of Die Matching in Arithmetic Decrease Method and Optimization for Cold-Drawing Aluminum Round Tube
Numerical Simulation of the Effect of Blowing Pressure on the Blow Molding of HDPE Oil Drum
Influence of EVA Content on the Properties of Extrusion Molding WPCS
Research on the Color Difference on Surface of 3104 Aluminum Alloy Stripes during Cold Continuous Rolling Process
Effect of C on Microstructure and Mechanical Property of Hot Rolled DP Steel
Research and Evaluation on the Machining Properties of Xylia Spp
Rapid Growth of Tin Whiskers on the Surface of Sn3.8Ag0.7Cu1.0Y Alloy
Chapter 10: Material Preparation, Properties and Failure
Synthesis and Characterization of Zinc Oxide Tetrapods from Zinc Galvanization Dross
The Synthesis and Characterization of Ti-MCM-41 by Microwave Radiation
Experimental Study on Particle Size Distribution of Admixtures on the Strength Influence of Low Clinker Cement
Effect of Microwave Treatment on the Properties of PET Fiber
A Dynamic Contact Method in the LECEL Test for Heterogeneous Brittle Materials
Research on Lubricating Properties of Alcohol and Ester in Stainless Steel Cold Rolling Process
Study on the Thermal Fatigue and Anti-Melting Loss Properties of the H13 Steels with Surface Vapor Oxidation
Preparation of the Microencapsulated Phase Change Material
A Study on the Bond Performance Improvement of Polypropylene Macro Fibers According to the Change of Surface Area
Study on the Refinement of Phenetole
Preparation of Hydrotalcite-Like Catalysts Supported by Mo under Microwave and its Catalytic Properties for Phenol Hydroxylation
Preparation of TiO2/Bamboo Charcoal Photocatalysts with Sol-Gel Method
Analysis of the Stones of Thousand Hand Buddhism by the Combination of On-Site and Laboratory Techniques
Preparation of Nanosized RuB with Lower Ru Content Supported on Al2O3 and its Catalytic Activity
Effect of Gravity on Resin Flow Behavior by VARI Process
The Photo-Catalytic Activity of Cu2+-Doped TiO2 and Applications in the Self-Cleaning Performance of Textile Wall Fabrics
Relaxation Behaviors of Polystyrene during Physical Aging
Actions of Temperature on the Structure and Properties of Hemp Fibre
Study on the Isothermal Crystallization Kinetics of Polyvinyl Pyrrolidone/Polyamide 6 Blends
The Preparation and Characterization of Electroless Copperplating Low- Temperature Expandable Graphite
The Durability Analysis of Secondary Recycled Asphalt Mixture
Preparation and Characterization of Ni-Modified Fe-Mo and Catalytic Selective Oxidation of p-Xylene
The Preparation of Waterborne Sodium Bisulfite - Blocked Polyurethane Curing Agent
Selection of Working Fluids for Low-Temperature Power Generation Organic Rankine Cycles System
Influence of Final Nitriding Temperature on the Preparation and the Catalytic Performance of CoMoNx/CNTs for Ammonia Decomposition
Preparation of Monolithic Transparent Mesoporous Silica and Mesoporous Onion-Like Carbon
Rheological Properties of Plastisols Based on Low-Toxicity Plasticizers
Chlorpyrifos-Loaded Attapulgite/Sodium Alginate Hybrid Microsphere and its Release Properties
Tribology Study of Nanodiamond Hybrid Polyurethane/Epoxy Interpenetrating Polymer Networks Materials
The Preparation of Graphene via Thermal Reduction Method
Preparation and Application of Pd-Based Stainless Steel Wire Mesh Monolith Catalyst
Rapid Microwave Synthesis and Fluorescence of LaF3 and LaF3:Re (Re=Ce3+, Eu3+, Tb3+) Nanocrystals
Preparation and Performance of Enviromentally Friendly Chemical Cleaner
Synthesis and Properties of a Thermo-/Light-Sensitive Hydrogel
Thermal Degradation of Bending Properties of Structural Larch Wood
Nonlinear Vibration Analysis of Fiber Movement
Experimental and Numerical Study of Premixed Combustion within Porous Media
Effect of Carbon Pretreatment on Cerium Loaded Activated Carbon as Desulfurization Adsorbents
Preparation and Application Properties Appraisement of Ecological Polyacrylate Pigment Binder
Hydrothermal Preparation of B-Doped TiO2 and Photodegradation of Salicylic Acid under Visible Light
The Construction and Application of Interatomic Potential in FeAl Alloy by the Finnis-Sinclair Many-Body Potential Model
Study on the Formula of the Environmental Friendly High Temperature Type PVC Sheathing Compound
Research on Removing of Pyrophyllite in Synthetic Diamond by the Physical Method Instead of Chemical Method
Preparation and Characterization of SrO-Na2O-Fe2O3-FeO-P2O5-SiO2 Ferrimagnetic Glass-Ceramics for Hyperthermia Application
Study on Optimization of Polymer Modification Repair Mortar with Metakaolin
Microstructures and Damping Capacity of Mg-6Zn-0.5Zr Alloy
Preparation and Catalytic Performance of Fe-Cr-Si-Pillared Montmorillonite as Coal Liquefaction Catalyst
Chapter 11: Thin Films/Surface Engineering/Coatings
Quantification of the N2+ Implanted AES Depth Profiles in Cobalt Films
Electrical and Optical Properties of Al-Sn Co-Doped ZnO Thin Films Deposited by Sol-Gel Method
Preparation and Electrocatalytic Properties of Polyoxometalate-Based Multilayer Films Electrode
Research on CrN-Based Ternary Films Deposited by Magnetron Sputtering
The Influence of Cr-Coating on the Thermal Conductivity of Diamond/Cu Composites
Preparation of Reflective Silver Layers on Polyimide Substrate via Room Temperature Chemical Reduction Technique Using Hydrazine Hydrate as Reductant
Synthesis and Characterization of Aluminum Nitride Ceramic Coating on Aluminum Alloy by Plasma Electrolytic Oxidation in CO(NH2)2 Electrolyte
Effect of Low Temperature Plasma Treatment on Surface Properties of Polyphenylene Sulfide Fiber
Impact of Cerium on Corrosion Behavior of Zinc Coating in Cl- Environment
In Situ Growth of Superhydrophobic Films on Aluminum Substrate
The Influences of the Plating’s Hardness, Abrasion and Antifriction Property Caused by the Adding of Nano- Al2O3 and PTFE
Research on Inhibition Marine Microbial Adherence of a Novel Nano-TiO2 Coating on Aluminum
Preparation of CaTiO3 Thin Film by Sol-Gel Dipping Coating
Effects of Affinity of Solvents on the Haze of Anti-Glare Films
Microstructure and Dry Sliding Wear Behavior of Laser Cladding (TiC+TiN)-NiCrWC Powder Composite Coating on DZ125 Superalloy
Experimental Research on PVDF Membranes Prepared by Supercritical CO2-Induced Phase Inversion
Directionally Solidified Laser Cladding
Study on Behavior of Ceramic Phases in Laser Surface Ceramic Process
Microstructure and Protertise of Self-Lubricative Ceramic Coatings on Carbon Steel by PEO in Aluminate Electrolyte Containing Graphite
Cyclic-Oxidation of RexOy-Modified Aluminide Coating
New Technology of Preparation of TiO2/Tourmaline by Dry Coated Method and its Application in Coating
Microstructure and Wear of Cr/WC- Ni60 Based Composite Coating by Vacuum Sintering
Comparison of Microstructure and Properties of Ni-Based Overlay Deposit under Longitudinal Magnetic Field and Transverse Magnetic Field
Comparison of Microstructure and Properties of Co-Based Overlay Deposit under Longitudinal Magnetic Field and Transverse Magnetic Field
Morphology and Distribution of M7C3 and TiC In Situ Synthesized in Plasma Surfacing
Study of Effect and Protection for Corrosion on Buried Pipeline by AC Interference
Influence of Substrate Condictions on Thermal-Shocking Property of Sm2Zr2O7/NiCoCrAlY Graded Thermal Barrier Coatings
Microstructure and Corrosion Resistance of Fe-Based Amorphous Coating Prepared Atmospheric Plasma Spraying
Electroless Ni-B Alloy Plating from DMF at Room Temperature
Superhydrophobic Sol-Gel Films Based on Copper Wafer and its Anti-Corrosive Properties
Fabrication and Performance Characterization of Al/Ti Multilayer Energetic Films
Microstructural and Magnetic Properties of C/FePt/Ti Films by Facing Sputtering
A Study of Surface Hardness Affecting in Electrical Discharge Machining on AISI P20 Plastic Mould Steel
Nano-Silica Reinforced UV-Curable Hybrid Hard Coatings on Polymethylmethacrylate (PMMA) Substrate
Nanocoating of Polyaniline Layer on the Surface of Graphene Sheets for Ammonia Gas Detection
Preparation and Characterization of Nickel Oxide-Based Superhydrophobic Surface
Electrochemically Deposited Thermoelectric Bismuth-Telluride Films
The Interface Properties of La2O3/GaAs System by Surface Passivation
Film-Forming Mechanism Analysis of Cerium Conversion Coating on Zinc Coating
Research on the Properties of Nanoparticles Modified Sodium Silicate Adhesive
Effect of Lanthanum Doping on Corrosion Protection Properties of TiO2 Coatings
Fabrication and Characterization of a Superhydrophobic Low-Density Polyethylene Film
Effects of Relative High Density Preparation of Interfacial Coated Pb(Zr0.52Ti0.48)O3 on CaCu3Ti4O12 with Short Sintering Time on its Dielectric Properties
Influence of Atmospheric Pressure Air Glow Plasma Treatment on Capillary Effect of Cotton Fabric
Application of Electrochemical Techniques in the Porosity Assessment of Electroless Coatings
Development of Dielectric Elastomer Actuators - Part I: Performance of Polyurethane Film Actuators with Dangling Chains and Network Structures
Effect of Diethylamine Addition on the Sealing Process of 6063 Al Alloy
Non-Volatile Memory Behaviour of MFIS Structure with Ba0.7Sr0.3TiO3 Films for Memory Capacitor Application
Study on Corrosion Resistant Properties of Nano-SiO2 Modified Epoxy Coating
Development of Dielectric Elastomer Actuators - Part II: Preparation of the High Dielectric Constant Film Actuators Containing BaTiO3 Particles
Fabrication of Hydrophobic Magnesium Alloy Surface by Wet-Chemical Methods
Influence of Al Concentration on Performance of Cu (In,Al)Se2 (CIAS) Films
Preparation and Anti-Icing Property of a Porous Superhydrophobic Magnesium Oxide Coating with Low Sliding Angle
Fiber Formation of the Biocompatible Polymer Nanofiber Membrane by Electrospinning
Research on (Ti,Al)N Films Deposited by FCVA
Structure and Properties of Sol-Gel Derived TiO2/SiO2 Films by Hot Water Treatment
Hydrothermal Synthesis of Lead Titanate Powder and Epitaxial Thin Film for Memory Capacitor Application
The Effect of Additives (NH4Cl) to Elimination of the Iron Dissolved in Flux Solution of Hot Dip Galvanizing Process
Effect of Surface-Micropored Process on Properties of Q235 Steel
Studies on Self-Assembly of Methoxy Polyethylene Oxide Propyl Trimethoxysilane on Silicon Substrate
Study on UV Curing Reaction of Nopadiene
Studies on Surface Morphology of Water-Based Silicone Rubber/Silica Sol Hybrid Coatings by Atomic Force Microscopy
Preparation and Electrical Properties of Bi0.9Nd0.1Fe0.925Mn0.075O3 Thin Films
Preparation and Characterization of Nano-SiCP Strengthened MCrAlY Graded Coating by Laser Multi-Layer Cladding
Effects of pH Value on Performance of CdS Films with Chemical Bath Deposition
Influence of Sputtering Power and Substrate Temperature on Properties of Al2O3-Doped ZnO Films
Preparation and Magnetic Properties of Electroless Ni-Fe3O4 Composite Plating on Polyester Fabric
Surface Morphology Evolution of High Speed Steel Induced by High Current Pulsed Electron Beam Irradiation
Preparation and Photocatalytic Property of Nd-TiO2 Thin Films Prepared by Sol-Gel Dip Coating
Study of Flame-Retardant and Waterproof Breathable Fabric by Coating Finishing
Effect of Current Density on the Composition and Mechanical Properties of Cr1-xAlxN Coating by Ion Arc Plating
Formation and Infrared Emissivity of Microarc Oxidation Coatings on Mg-7Li Alloy
Study on Heat Insulation Properties of Zinc Oxide Coated Hollow Glass Beads
P-Doped p-Type ZnΟ Films Deposited by Sputtering and Diffusing
Characterization of AB5-Type Metal Hydride Modified by Electroless Plating Nickel
Coating Humic Acid on Vermiculite Surface for the Adsorption of Nickel(II)
Microstructure and Corrosion Resistance of Microarc Oxidation Coatings on AZ31 Magnesium Alloy Extrusion Profiles
Effect of Nitrogen Flow Rate on the Structure and Properties of TiN Thin Films Deposited onto β-Type Ti-15Mo-3Nb-3Al-0.2Si Alloy Substrates by Reactive Magnetron Sputtering
Energy Storage of NiO/TiO2 Bilayer Films and its Effectiveness in the Degradation of Acid Orange 7
Chapter 12: Computer Application, Mathematical Modeling and Analysis
Composition Patterns of Logical Net Elements
Mathematical Model for the Tree Leaf Shape and Estimation of Leaf Mass
The N-Th Canonical Roots of Matrices
Multimedia Technology Application in Teaching Basketball Skills
Technical Analysis on Three-Dimensional Virtual Learning Community
H∞ Filtering for Nonlinear Systems with Time Delays via Takagi-Sugeno Fuzzy Model
Applications of Artificial Neural Network and Genetic Algorithm on Copper Tube Drawing
Research of Thread Mechanism in Communication Network
Convergence of PD-Type Iterative Learning Control of Nonlinear Discrete Systems and its Robustness
Classification of UO2 Green Pellet Quality Using Intelligent Techniques
An Algorithm of Iterative Learning Control Based on Vector Plots Analysis and its Robustness
Multi-Attribute Decision Making Method Based on Intuitionistic Fuzzy Grey Sets
Multi-Channel Fiber Optical Sensing System for Urban Bridge Cluster Health Monitoring
A Posteriori Error Estimates for a Steklov Eigenvalue Problem
A Two-Grid Discretization Scheme for a Sort of Steklov Eigenvalue Problem
Two Optimal Double Inequalities for Error Function
Digital Design Research on Color Simulation of Woven Trademark
Oscillation of Differential Equations with Variable Coefficients on Time Scales
Oscillation of Dynamic Equation on Time Scales
Mathematical Simulation Analysis of Concrete Perforated Bricks with Three-Dimension Conjugate Heat Transfer
CAD/CAE on the Frame of Vertical Type High-Pressure Grouting Machine
A New Isometric Integral Operator on Bloch Space in the Disk
Based on the Improvement of Grey Target Theory in Diesel Engine Fault Diagnosis
Finite Element Analysis to a Kind of Elliptic Variational Inequality
Improved on Control Method of Direct-Drive Wind Power Generation System
A New Spherical Triangle Graphic Method
Chapter 13: Modeling, Simulation and Emulation
Numerical Study of Shellside Performance of Heat Transfer and Flow Resistance for Heat Exchanger with Trefoil-Hole Baffles
The Force Analysis of the Slide Way in Building Large Structure Based on the Girder Structure
Steady-State Simulation of the Strip-Flash Ethanol Fermentation Process
Investigation on Free-Wheel Hub for Starter Rotary Forming Process and Die Design Based on Numerical Simulation
Numerical and Experimental Fractal Pore Network Study on Drying of Porous Media: Model Building
Numeric Simulation of Three Dimensional Flow Field of Molten Steel in a Mould with High Efficiency Inner and Outer Couple Cooling
Numerical and Experimental Fractal Pore Network Study on Drying of Porous Media: Numerical Simulation
The Design of Addendum Surfaces for Automotive Back Light Holders Based on the Software Dynaform
3D Modeling and Motion Simulation of Mine Skip Getting through Dump Rail Based on Pro/E
Study on the Probability Finite Element Format of Hyper-Static Shaft
Prediction of Side Compression/Side Tension Elastic Modulus on Lattice Structure Sandwich Core Materials
Simulation and Study on Texaco Gasification of Semi-Cokes Prepared by DG Coal Pyrolysis Process
Laser-Induced Thermal Bubble-Mixing on a Microfluidic Platform for Lab-on-a-Chip Applications
Modeling of DIR-SOFC Based on Particle Swarm Optimization-Wavelet Network
A New Model for the Simulation of CO2 Absorption in an Industrial-Scale Packed Column
A Statistical Constitutive Model of Continuous Damage for Fragile Solid Material
Numerical Simulation on Stress Distribution of High Pressure Water Jet Impacting Solid Material
Kinematic Modeling of the Gear Shaping Based Novel Cutting Area Analytical Method for Large Gear Shaper
Scheduling Flexible Production Lines with No Intermediate Buffers by Hybrid Algorithms
Numerical Simulation on Thermal Energy Storage Behavior of Cu-H2O Nanofluids
Finite Element Modelling of Composite Repair in Offshore Pipe Riser
Simulation of Cumene Synthesis by Suspension Catalytic Distillation
A Two-Dimensional CFD Simulation for Different Spacers of Spiral Wound Moudles
A CFD Simulation for Fluid Flow in a Spacer Filled Channel
Numerical Simulation of Inner-Outer Couple Cooling Slab Continuous Casting in the Filling Process
Flow Field Characteristics Simulation of the Exhaust Hood
Pelletization Quality Simulation for Operation Uncertainty of Die-Plate Based on Liquid-Solid-Liquid Coupling Model
Numerical Simulation of Spot Welding Galvanized Sheet with Insert Material
Simulating Pipe Reactor of Biological Growth in Single-Phase Laminar Flow Based on Computational Fluid Dynamics and Reaction Dynamics by OpenFOAM
Simulation Research on Filtration of High Temperature Dusty Gas Based on Foam Ceramic Material
Spring-Damping Model of Moving Boundary in SPH
Numerical Simulation of Oil- and Water-Sands Multiphase Flow in Gathered Pipes
Finite Element Analyses and Model of Squeeze Casting Process for Producing Magnesium Wheels
Motion Simulation of Key Components in a Package Machine
The Simulation Analysis of the Forming Process of Polymer Microlens during Roll-to-Roll Hot Imprint Process
Loess Cave Dwellings’ Safety Factor Based on SRM
The Finite Element Mesomechanics Simulation of Polycrystal Martensitic Transformation’s Plastic Strain
Modeling and Simulation of Freshwater Generator Subsystem of Low Speed Engine Room Simulator Based on Visual
The Study of Fracturing Crack Propagation Regulation Based on Information Entropy Theory
Study on the Mechanism Model of Fracture Propagation Based on the Energy Theory
Study on Hydraulic Characteristics of Flow around Rectangular and Semicircular Cross-Section Cylinder
Analysis of Coupled Lattice Boltzmann Model with Well-Balanced Scheme for Shallow Water Flow
Simulation of Process for Preparing Sodium Methoxide Using Aspen Plus
Thermal-Mechanical Simulation of the Controlled Rolling and Cooling Process by Orthogonal Design for Pipeline Steel
Design and Simulation of Ascending Curvilinear Micro Channel for Cancer Cell Separation from Blood
The Nonlinear Static Formulation of Variable Cross-Section Beam Element Based on Positional Description
Nonlinear Stain of Variable Cross-Section Beam Element Based on Positional FEM
Numerical Simulation of Laminar Flow Field in a Stirred Tank with a Rushton Impeller or a Pitch 4-Bladed Turbine
Two-Phase Flow CFD Simulations of Bubble Crystallization Tube
Numerical Simulation on the Effective Thermal Conductivity of Porous Material
Phase Field Modeling of Multilayer Epitaxial Growth
Solution of Gas Explosion Load and Simulation of Dynamic Response of Multilayer Structures
The Damage Mechanics Model of the Sidewall Rock under the Effect of Shear Stress
Simulation of Fatigue Life Prediction and Enhancement of Connecting Rod of Car Engine
Chapter 14: Product Design, Manufacturing and Maintenance
Effect of Heating Parameters on the Part’s Properties in Hot Stamping Process
An Integrated Model for the Design of Cellular Manufacturing Systems
A Brief Talk on Material Application in Green Packaging Design
Cyanotype Technology Research and Practice
Research on Defect Diagnosis and Repair of LCD
A Design Research of Household Steam Massage Deceit that Based on KANSEI Engineering
A Study of the Relationship between the Ease Allowances of the Knitted Underwear and the Clothing Pressure
Studay on Platinum Prints Processes
Research on the Panel Fabrication for the Field Emission Display with Double Strip Emitters
Study on Technology of Bamboo Processing
Visual Elements and its Transmission of Clothes Shell Fabric Innovative Design
Advanced Materials and Processes II
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
