Chapter
Fracture Analysis of Thick Plate for Partial Penetration Multi-Pass Weldment Using Ĵ-Integral
The Brittle-Ductile Transition Character of Rocks and Its Effect on Rockbursts
The Role of Constraint and Warm Pre-Stress on Brittle Fracture in Ferritic Steels
Effect of Constraint on the Initiation of Ductile Fracture in Shear Loading
Study on Damage History under the Different Stress Triaxiality in Constrained Ductile Media
A Robust Method for Ramberg-Osgood Fit Relevant to Elastic-Plastic J Estimates
Brittle Damage and Coalescence Model of Jointed Rock Mass
Stable Crack Extension through AISI 4340 Steel: Experimental Investigation
Experimental Study on Fracture Mechanism of Aluminum Plates in Tension and Laser Irradiation with High Temperature Moiré Interferometry
The Mechanisms of Crack Propagation from Surface 3-D Fracture under Uniaxial Compression
A Study of Fracture Mechanism and Shear Strength of Rock Bridges through Analytical and Model-Testing Methods
Damage Tolerance Analysis of Multiple Cracks Starting from Holes in a Plate Loaded by Bending and Tension
Numerical Simulations of Failure of Brittle Solids under Dynamic Impact Using a New Computer Program - DIFAR
The Effect of the Incidence Direction of Stress Wave on Cracks
Influence of Imperfect Interface on the Propagation of Love Waves in Piezoelectric Layered Structures
Transient Anti-Plane Crack Problem in a Functionally Graded Smart Structure
Nonlinear Acoustoelastic Interactions of Lamb Waves with LiNbO3 Films Deposited on Sapphire Substrates
Development of a Material Constitutive for High-Rate Using a Combined Experiment/Computation Method
Study on the Mechanical Properties of Soft Rock under Dynamic Uniaxial Compression
Analysis of Low-Velocity Impact on Composite Sandwich Panels Using an Assumed Strain Solid Element
Damage Assessment of Composite Structures Subjected to Low Velocity Impact
Strength and Impact Damage Characteristics of Al7075/CFRP Sandwich Panel
Numerical Simulation of Impact Transonic Interfacial Fracture
Fragmentation of Kidney Stone by Shock Wave-Experimental Approach
Determination of Dynamic Fracture Toughness Using Strain Measurement
Effects of Impact Angle on Cone Crack Formation in Impact-Loaded Soda-Lime Glass
Experimental Measurement of Dynamical Young's Modulus and Shear Modulus of Low-Impedance Materials
A Study on Dynamic Fracture Behavior of Magnesium Alloys under Biaxial Stress
The Structural Impact Characteristics of Indonesian Railway Vehicle
The Singularity in Multi-Material Wedges under Thermal Loading
Relation between Stress Intensity Factor of a Small Edge Interface Crack and Intensity of Free-Edge Stress Singularity of Bonded Dissimilar Materials
Mixed Mode Effects on the Interfacial Crack Propagation
Failure Behavior of Anodized Coating-Magnesium Alloy Substrate Structures
Influence of Second Phase Particles on Fracture Toughness in AZ31 Magnesium Alloys
Contact Damage in Curved Porcelain/Metal Bilayers
Prevention of Delamination during Drilling of Composite Material Using Vibration
Effect of the Groove Shape of Ultra Thick Box-Column with Center Segregation under High Heat Input for Corner Welding
Mode III Interfacial Edge Crack in a Magnetoelectroelastic Bimaterial
Parametric Study of Combined Adhesive-Riveted Lap Joints
Effects of Surface Treatment and Loading Speed on Adhesive Strength of Aluminum to Polycarbonate Lap Joints
The Performance Advancement of Test Algorithm Using Neural Network for Semiconductor Packages
Measurement of Mechanical Properties of Electroplated Nickel Thin Film
Properties of WC-Co Ceramic Coatings of Ultra-Fine Grains Prepared by Electro-Thermal Explosion Method
Fracture Strength of WC-12Co Thermal Sprayed Coating under Mixed Loading Mode I&III in Crack Surface Displacement
Coating Interface Fracture Toughness Evaluation by a Combination of Edge Compression and Slinging Load
Characterization of Crack Propagation along Bond Coat/Topcoat Interface of a TBC System
Effect of Decarburized Layer of Tool Steel on Delamination Strength of WC-Co Thermally Sprayed Coating
Observation of Heat Cycle Delamination Process with Surface Strain Measurement in Thermal Barrier Coating
The Effect of an Imperfect Interface on the Singular Stress Field of an Orthotropic Bimaterial Wedge
The Horizontally Polarized Shear Waves in Multilayered Piezo-Composites with 2-2 Connectivity
Anti-Plane Interface Edge Crack between Two Dissimilar Piezoelectric Blocks
Dynamic Response of Multiple Coplanar Interface Cracks between Two Dissimilar Piezoelectric Materials
Evaluation of Interfacial Strength by Multi-Stages Peel Test
Reliability Analysis in Flip Chip Package under Thermal Cycling
Development of a Micro Gyroscope Using Epitaxial Polysilicon and Its Performance Test
Effect of Sb Addition on Microstructure and Shear Strength of Sn-Ag Solder Joints
Thermo-Mechanical Stress in Passivated Al-0.5%Cu Thin Films
A 3D Finite Element Model of a Knee for Joint Contact Stress Analysis during Sport Activities
Development of Orthotropic Beam Element Using a Consistent Higher Order Deformation Theory
Meshless Method Used in Wave Propagation in Anisotropic Material
Application of Numerical Manifold Method to P-Version Adaptive Analyses
A New Quadratic Membrane Element
Analysis of Piezoelectric Fracture under Combined Mechanical and Electrical Loading based on Meshless Method
Reliability Analysis of Steam Turbine Blade Using Monte Carlo Simulation
Magnetostrictive Terfenol-D Material Linear Simulation Using a Coupled FE-BEM
An Improved FOSM Method for Calculating the Failure Probability of Welded Pipes with Cracks
Study on Finite Dynamic Element Method for Dynamic Consolidation
A Fractional Two-Step Finite Element Formulation for Unsteady Free Surface Flow Using ALE Method
Finite Element Analysis on the Scoring and the Opening Process of Steel Can
Equivalent Finite Element Modeling of Thick Composite Structures for Analysis of Composite Hingeless Hub System
A Study on the Stability Analysis According to Hinge Condition of Micro Stage for Micro Cutting Machine
Stress Analysis and Design Strategy for Lightweight Car Seat Frame
A Study of Fine Blanking Process by FEM Simulation
Buckling of Functionally Graded Circular/Annular Plates Based on the First-Order Shear Deformation Plate Theory
Elastic Buckling Strength of Restrained Orthotropic Web Plates
Elastic Web Buckling Strength of Pultruded Flexural Members
Elastic Local Buckling of Transversely Isotropic Thin-Walled Compression Members with Varying Thickness
An Analysis of the Local Buckling Collapse Behavior of an Aluminum Square Tube under Concentrated Bending Moment Loads
Study of Thermo-Rheology Characters of Rock under the Uni-Axial Compression
A Study on the Thermoelastic Analysis in Shear Deformable Discontinuous Composites
Analytical Solutions of Stresses in Functionally Graded Circular Hollow Cylinder with Finite Length
Thermo-Mechanical Behaviors of Ceramic-Coated Structures in Outer Space Using Partial Model Technique
Parametric Study on Compression Deformation Behavior of Conformal Load-Bearing Smart Skin Antenna Structure
Stress Intensity Factors of an Infinite Solid with Two Cavities having a Crack Emanating from the Cavity under Tension
Dimple Fracture Simulation of Fracture Specimen under Different Constraint Conditions
On Fracture Analysis Using an Element Overlay Technique
The Implementation of Inter-Element Model for Crack Growth Simulation
Finite Element Analyses for Thickness Effects on J-Integral Testing using Non-Standard Testing Specimens
Three-Dimensional Elastic-Plastic Finite Element Analysis of Biaxially Loaded Cracked Plates
2D Vector Cellular Automata Model for Simulating Fracture of Rock under Tensile Condition
Finite Element Analysis of Rubber Particles Size Distribution on Fracture Toughness of Rubber-Modified Polymer
3D Numerical Analysis for the Inelastic Deformation of Rubber Particle Modified Polymers
Numerical Modeling of the Constitutive Relationship of a Soft Rock Using a 3-D Elastic Visco-Plastic Model
Quasicontinuum Models for Interface Multiscale Model
Atomistic Simulations of Dislocation-Loop Glidings in Al(111) Nanoindentation
Dislocation Dynamics Simulation of Grain Boundary Effects on Yield Behavior of Metals
Effects of Meso-Scale Structure and Interactions on Macro-Scale Mechanical Properties in Polymeric Materials
Inverse Analysis Method for Photoelastic Measurement of 3D Stress State
Quantitative Analysis on Parameters of a Defect with Speckle Interferometry and Finite Element Optimization Method
Identification of Gurson’s Material Constants by Simple Experiments
Re-Evaluation of Dynamical Models of Buildings Using Identification Techniques
Rational Reinforcing of the Honeycomb Facets Variable Thickness for Wind Turbine
A Study on the Analysis and Design of Grillages under a Worst Point Load
Development of a Knowledge-Based Information Management System for Plant Maintenance
Behaviors of Composite Circular Struts in Space Environment: Analyses and Experiments
Effect of Boundary Conditions of Failure Pressure Models on Reliability Estimation of Buried Pipelines
Design Sensitivity Analysis and Optimization of Nonlinear Anisotropic Structures
Sensitivity Analysis of Joints' Effects on Damage Zones in Surrounding Rockmass
Sensitivity Analysis of Major Parameters on Piping Failure Probabilities
Shape Optimization of a Structure with a Crack for Prolonging Fatigue Life
Shape Optimization in Laminated Composite Plates by Growth-Strain Method, Part One - Volume Control
Shape Optimization in Laminated Composite Plates by Growth-Strain Method, Part Two - Stress Control
Stress Corrosion Cracking – A Swedish Regulator's Perspective
Electrochemical Potentiodynamic Reactivation: Development and Applications of the EPR Test
Can Non-Destructive Stress and Microstructure Analysis Support the Fracture Risk Assessment? A Discussion based on the IZFP Experience
Influence of Surface Films on the Susceptibility of Inconel 600 to Stress Corrosion Cracking
Localized Deformation Induced IGSCC and IASCC of Austenitic Alloys in High Temperature Water
Thermo-Mechanical Behavior of Cracked Ti-55.4%Ni Shape Memory Alloys under Mechanical Loading
In Situ Micro Raman Spectroscopy for Characterization of Oxide Film Formed on the New Surface and for Measurements of the Stress of Oxide Film Formed on 304L Stainless Steel
Effects of Environmental Factors on the Electronic Properties of Interfacial Oxide Film on 304L Stainless Steel in High Temperature Pure Water
Comparison of the Electric Properties and ESCA Result of Oxide Films Formed on AISI 316L Steel in Simulated BWR Conditions during SSRT
The Analysis of Hydrogen Diffusion under Heat Transfer Condition around the Heat Affected Zone of Welding
Mechanism of Hydrogen Embrittlement Due to the Interaction of a Crack, Moving Dislocations and Hydrogen Cluster
Effects of Dissolved Hydrogen on the Primary Water Stress Corrosion Cracking Behavior of Alloy 600 at 325 °C
Development of Novel Non-Destructive Inspection Technique Using High-Frequency Signal Transmission Characteristics
On Microwave Dual Frequency Technique for Evaluation of Surface Cracks
Condition Monitoring of the Material Test Facility Using Vibration and Ultrasonic Measurements
Remote Nondestructive Evaluation of Delaminating Tiles by Using Photorefractive Vibration Imaging
Multiple Scattering of Elastic Waves in a Fiber-Reinforced Cementitious Composite
A Fast Shape Inversion Method of Flaws in Materials for Infrastructures
Time of Flight Diffraction Method Using Laser Ultrasound for Noncontact Flaw Height Measurement
SSRT-CER and Impedance Measurements of Oxide Films on Stainless Steels in Oxygenated High Temperature Water
Grain Boundary Engineering for the Control of Mechanical Properties and Oxidation-Induced Embrittlement in Silicon Carbides
Grain Boundary Engineering for Intergranular Corrosion Resistant Austenitic Stainless Steel
Measurement of Compositional Profile of ID Facets by FEG-AES and its Relevance to IDSCC of Alloy 182 in a Simulated BWR Environment
Stress Corrosion Cracking of Stainless Steel Pipe Weldments in BWR Environment
3D-FEM Simulation for EAC Crack Growth Evaluation and its Implication to Specimen Size Effects on Crack Growth Behavior
Effect of Physical Property and Chemistry of Water on Cracking of Stainless Steels in Sub-Critical and Supercritical Water
Aging of High Speed Train Wheelsets and its Quantitative Characteristics Based on Fracture Mechanics for Optimization of In-Service Inspection
Early Detection of the Material Degradation Based on the Integrated Analysis of Diverse Measurement Techniques
Information Integration System for Material Degradation in Severe Environment
Fracture Simulation of Randomly Cracked Material with Various Crack Length Distributions
Effect of Cerium and Silicon Additions to MCrAIY on the High-Temperature Oxidation Behavior and Bond Strength of Thermal Barrier Coatings
Imaging and Evaluation of Nano-Scale Crack by Using Ultrasonic Atomic Force Microscopy
Fatigue Property and Fatigue Crack Propagation Behavior of Al2O3/A6061 MMCs at Room and Elevated Temperature
Fatigue Life Prediction of Impacted Glass/Epoxy Composites under Variable Amplitude Loading
Control Effect on Fatigue Crack Propagation of TiNi Fiber Reinforced / Polycarbonate Composite Material
Normal and Abnormal Fracture Behaviors in Low-Cycle Fatigue of a Unidirectionally Reinforced SCS-6/SP-700 Composite
In Situ Tests on Creep Behavior of Rock Mass with Joint or Shearing Zone in Foundation of Large-Scale Hydroelectric Projects
Usefulness of the Creep Work-Time Relation for Stress Intensity Limits (St)
Fatigue Characteristics of Composite Antenna Structure
Creep Life Prediction of High Temperature Tube Materials for Power Plants
A Life Prediction Model for Nickel-Base Single Crystal Superalloy DD3
Dynamic Strain Aging during Low Cycle Fatigue Deformation in Prior Cold Worked 316L Stainless Steel
Low Cycle Fatigue Behavior of 429EM Ferritic Stainless Steel at Elevated Temperatures
Effect of Si Content on the Creep Properties of Ti-6Al-4Fe-xSi Alloys
The Application of Fracture for Middle Carbon Steel in Extralow Cycle Inverse Rotating Bending Fatigue Loading
The Application of Fracture for Middle Carbon Steel in Extra-Low Cycle Rotating Bending Fatigue Loading
A Study on the Effect of Overload Ratio on Fatigue Crack Growth
A Study on Evaluation of Overload Effects on Fatigue Crack Growth
Fatigue Crack Growth in Steels 42CrV and IR3Mo
Microstructure and Fatigue Crack Growth Behavior of Heat Affected Zone in P92 Steel Weldment
Effect of High Temperature Air-Exposure on Room Temperature Fatigue Crack Growth of Ni-Base Single Crystal Superalloy CMSX-10
Thermal-Fatigue Oxidation of Carbon-Fiber Reinforced Polyimide Composite
Thermal Stress and Fatigue Analysis of Exhaust Manifold
Solid Solution Strengthening Behavior of 25Cr-20Ni Austenite Stainless Steel
Fatigue Properties of Austenitic Stainless Steels with Different Nitrogen
A Study on Fretting Fatigue Behavior of Degraded 1Cr-0.5Mo Steel
The Effect of Stress Ratios on Very High Cycle Fatigue Properties of Ti-6Al-4V
Mechanical and Fatigue Properties of the SiCp/Al Composites
Effect of Pre-Strain on Fatigue Properties of NHH Rail
Effect of Cavitation Number on the Improvement of Fatigue Strength of Carburized Steel Using Cavitation Shotless Peening
Hydrogen Effect on Fatigue Strength of Structural Steels
Application of Roller-Working on Improving the Fatigue Strength of Notched Austenitic Stainless Steel
Influence of Coarsening Treatment on Fatigue Strength and Fracture Toughness of Al-Si-Mg Alloy Casting
Roller Working Effect on Fatigue Strength of Ti-6Al-4V Alloy
On Characteristics of Weibull Distribution Parameters of Fatigue Crack Growth Lives
Probabilistic Estimation of the Fatigue Life of an Electric Car Bogie Frame
Super-Long Life Fatigue Behavior of Structural Aluminum Alloys
Fatigue Design of Leaf Spring Based on Proving Ground
Fatigue Studies of FRP Composite Decks at Extreme Environmental Conditions
Development of Flaw Evaluation System for Creep-Fatigue Crack Propagation of High-Temperature
Development of Fatigue Detecting Sensor
Analysis of Creep Crack Growth by Intelligent Phased Array Ultrasonic Inspection
Acoustic Emission Behavior during Fatigue Crack Propagation in 304 Stainless Steel
Actuator Performance Degradation of Piezo-Composite Actuator LIPCA under Cyclic Actuation
Stress Corrosion of an Aluminum Alloy in Sodium Chloride Solution under Different Temperatures and Stresses
A Study on the Corrosion Fatigue Characteristics of Al 2024-T3 Alloy
A Study on the Evaluation of Material Degradation of 1Cr-1Mo-0.25V Steel Using Ultrasonic Techniques
Effect of Water Chemical Corrosion on Strength and Cracking Characteristics of Rocks - A Review
A Prediction Method of Corrosion Degradation and Corrosion Fatigue Strength of TMCP Steel
A Structure Nondestructive Evaluation Using Laser-Generated Ultrasonic Application
Damage Detection of Beams Based on Experimental Wavelet Analysis of Flexible Waves
Nondestructive Evaluation and Fracture Mechanism of Smart Material
UT System Composition and Welding Flaw Classification for SWP Stability Estimation
A Study on Expanding Characteristic of Weathered Granite
Optimization of Testing Method in Comparison with the Coated Composites and Metals by Vibratory Cavitation Test
Evaluation of the Damage for Gettering in Silicon Wafer Introduced by a Cavitating Jet
Gettering of Cu in Silicon Wafer by Using Cavitation Impacts
Processing and Properties of Aluminum Matrix Composites Reinforced with Stainless Steel Fiber
Theoretical Assessment of Stress Analysis in Short Fiber Composites
The Hygrothermal Degradation on Mechanical Properties of Short-Fiber Reinforced Nylon
Failure for Notched Plates of Short Glass Fiber Reinforced Polypropylene under Static and Cyclic Loading
Effect of HfC Addition on Mechanical Properties of Nb-5Mo-2W-18Si In-Situ Composites
Effect of Initial Porosity on Mechanical Properties of C/SiC Composites Fabricated by Silicon Melt Infiltration Process
Effects on Inorganic Binder to Improve Strength and Hardness of α+ Al18B4O33w/AC4CH Alloy Composites
Temperature Joint Study of Reinforced Concrete Frame and Bent
Behaviors of Shape Memory Alloy Wire Embedded Smart Composite Skins and Actuators
Analysis of Laminated Woven Textile Composites Using a Modified Single-Field Macroelement
Fabrication and Properties of Reaction Sintered SiC Based Materials
Fracture Characterization of MoSi2 Based Composites
Critical Evaluation of the Stiffening Effect of Carbon Nanotubes in Composites
A Study on the Dimensional Stability of Interior Composite Panel Made by Vacuum Bagging and Hand Lay-Up Fabrication Method
Predictions of Elastic Properties of Multi-Axial Warp Knitted Fabric Composites
Design of Composite Pressure Vessels with Metallic and Plastic Liners
Numerical Simulation of the Influence of Grain Size on the Progressive Development of Brittle Failure in Yuen Long Marbles
Numerical Simulation on Failure Patterns of Rock Discs and Rings Subject to Diametral Line Loads
Fracture Behaviors of Multi-Crack in Rock-Like Material
Theoretical, Numerical and Experimental Study of Deformation and Failure Process of Rock
Analysis of Weak Stress Aging in Earth Dam
Study on the Joint Open Deformation Using Joint Interface Element in the Shiplock of the Three Gorges Project
Hydro-Mechanical Coupling Analyses of Cofferdam Stability of Taian Pumped Storage Power Station
Study on Stability and Anchoring Effect of Jointed Rock Mass of An Underground Powerhouse
Numerical Studies of the Influence of Heterogeneity on Rock Failure with Pre-Existing Crack in Uniaxial Compression
Displacement Back Analysis Research on Bolt-Grouting Supporting Parameter of Rock Mass in Jointed Rock Roadway
A New Three-Dimensional FEM Model on Arch Dam Cracking Analysis
Development and Performance Test of a Micromachined Resonant Accelerometer
Characteristics of Laser Speckle Measurement of Tooth Roughness
Surface Effect for Different Types of Materials in Nanoindentation
Image Reconstruction and Analysis of Three-Dimensional Fracture Surfaces Based on the Stereo Matching Method
Influence of the Surface Topography on the Micromechanical Properties and Performance of a CMP Finished AlN Component for Silicon Plasma Etching
Effect of Surface Nano-Crystallization on Microstructure and Mechanic Properties of Commercial Pure Titanium
Measurement of Elastic Constants for Composite Materials by 3-Point Bending, Twisting and Impact Sound Test
Damage Properties of PEEK Films Irradiated by Atomic Oxygen
Effect of Electric Weld Current on Spatter Reduction in Spot Welding Process
Mechanical Behavior of the Long Rod Penetrator during Launch
The Bending Strength of Brittle Materials and the Characteristics of the Elastic Wave Signal by Vickers Indentation
Influence of the Material and Thickness of the Specimen on an Infrared Stress Image
Effects of Major Parameters on the P-T Limit Curve Construction of Embrittled Reactor Vessel
On Failure Strain and Thinning Resistance in Interstitial-Free Steel Sheet
Deformation Measurement of Wood Subjected to Shearing Loads Using Electronic Speckle Pattern Interferometry
Application of Fine Blanking to the Manufacture of a Sprocket with Stainless Steel Sheet
Diagnostics of Laser-Induced Plasma in Welding of Aluminum Alloy
Effect of Die Drawing Process on the Mechanical Behaviour of Polypropylene
Analysis on the Temperature Distribution of Tread Part in Running Tire
The Study on Effects of Thermal Aging of Dissimilar Weld Zone in a Primary Reactor Cooling System
Advances in Fracture and Failure Prevention
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
