Chapter
Crack Propagation Behavior in Nano Size HCP Crystals by Molecular Dynamic Simulation
Assessment of Indentation Fracture Toughness Based on a Direct Measurement of Crack-Driving Residual Stress
Fracture Toughness Measurement of a Micro-Sized Single Crystal Silicon
A Study of the Static and Dynamic Characteristics for Automotive Rubber Mount by FEA and Experiment
The Thermal Analysis of Brake Disc with 3-D Coupled Analysis
Study on Vehicle Collision-Avoiding Radar and Intelligent Cruise Control System
Development of a Torsion-Free Brake Shoe Holder Hanger for the Bogie of Railway Freight Car
Fatigue Design Criterion of LCV Leaf Spring Based on Road Load Response Analysis
The Failure Analysis of the Fractured Steel-Wire-Rope of Electric Glass Lifter in Car
Design of Compound CVT with 2K-H II Type Differential Gear
The Development of Dunnage for Transportation of a Steel Roll Coil
Structural Assessment for Bogie Frame of 180km/h Korean Tilting Train
A Study on the Contact Behaviors of Infinitely Variable Transmission System with Full Toroidal Shapes of Disks
The Influence of Residual Stresses by Shot Peening on Fatigue Strength of the Automobile's Coil Spring
Analysis to Stress Relaxation Phenomena of Viscoelastic Materials by Means of Irreversible Thermodynamics (Ⅰ)
Creep, Tensile and Oxidation Properties of Ti-4wt%Fe-(0~2)wt%Si Alloys
Evaluation on Small Punch Creep Test by Finite Element Method
Fracture and Viscoelastic Behavior of Some Polymers at High Temperatures
Analysis to Nonlinear Creep Behavior of Viscoelastic Materials with Structure Varieties by Means of Irreversible Thermodynamics (Ⅱ)
Estimation of Creep Crack Growth Properties Using Circumferential Notched Round Bar Specimen for 12CrWCoB Rotor Steel
High Temperature Oxidation Behavior and Strength of Ti-Al-Nb Ternary Alloys
A Study of Nitrogen Effect on the Characteristics of Creep-Rupture in 18Cr-9Ni Austenitic Steels
Evaluation of Creep-Fatigue Life Using Backscattering of Rayleigh Surface Wave
Irradiation and Operating Temperature Effects on the Tensile Characteristics of CANDU Pressure Tube Material
Some Fundamental Aspects of High Temperature Defect Assessment
Mini-Composites C/SiC Tensile Strength at Elevated Temperature in Vacuum
The Evaluation of Tensile Properties at High Temperatures Using a Ring Specimen
Creep Crack Growth in P92 and P122 Alloy Steel Weldment
High Temperature Crack Growth Behavior of 304 Stainless Steel under Creep and Fatigue Loading
Effects of Heat Treatment Condition on the Microstructure Evolution of Inconel 690
The Effect of Delta-Ferrite in P92 Steel on the Formation of Laves Phase and Cavities for the Reduction of Low Cycle Fatigue and Creep-Fatigue Life
Effects of Forming Processing on Mechanical Properties of Ti-48Al-2Mn-2Nb Intermetallics
Effect of Processing Parameters on Properties and Microstructures of Warm-Rolled Interstitial-Free (IF) Steel Sheets
Effects of Melt-Treatment Technique on the Metallurgical Quality and Mechanical Properties of Al Sheet Used for Can Manufacture
The Strength and Hardness of Metal Matrix Composites by Binder Additives
Influence of Containerless Solidification on Hardness in Multifunctional Titanium Based Alloys
Simple Estimation of Deformation-Induced Martensite in Stainless Steel
Tensile and Fracture Behavior of NbSS/Nb5Si3 In Situ Composites Prepared by Arc Melting
Measuring Residual Stress with the Indentation Method in Structural Ceramics
A New Specimen for Measuring the Interfacial Toughness of Al-0.5%Cu Thin Film on Si Substrate
Strength Analysis of MEMS Micromirror Devices - Effects of Loading Mode and Etching Damage
Mechanical Properties and Process of ZnO Deposited Various Substrates
The Study on Fatigue Life of Interconnect with Respect to Geometrical Shape of Supporting Structure and Load Conditions in MEMS
New Structures and Techniques for Easy Axial Loading Test of Static and Fatigue Properties of MEMS Materials
Fracture Behavior of Single- and Polycrystalline Silicon Films for MEMS Applications
The Improvement of Wet Anisotropic Etching with Megasonic Wave
Influence of Groove Slotting for Micro-Sensor Embedding on Smart Bearing's Mechanical Characteristics
Development of Full-Reversed Bending Fatigue Tester Based on AFM Technique for Cyclic Damage Evaluation of MEMS
XRD Tensile Test Technique to Measure Mechanical Properties of Micron-Thick Si and TiN Films
Effect of Thickness on Grain Growth in Electrodeposited Copper Film by Cyclic Stressing
Experimental Reliability Estimation and Improvement for a Wafer Level Vacuum Packaged MEMS Device
Analysis of Time-Dependent Degradation of a Micro-Resonating Structure with a Notch
Evaluation of Shape Recovery Force by Electric Heating of TiNi Shape-Memory Alloy Reinforced Composites
Apparent Negative Piezoresistivity of Single-Ply CFRP due to Poor Electrical Contact of Four-Probe Method
Equivalent Modeling for Shape Design of IPMC (Ionic Polymer-Metal Composite) as Flapping Actuator
Electrostatically Driven Soft Polymer Actuator Based on Dielectric Elastomer
Sub-Structure Pseudo-Dynamic Response Test of a Pseudo-Elastic Bracing System Made of Shape Memory Alloy
The Hybrid Simulation of a Steel Frame Strengthened by Fully Mechanical Braces
Preparation of Solid Polymer Actuator Based on PEDOT/NBR/Ionic Liquid
Tensile and Compressive Behaviors of Smart Electrorheological Materials
Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints
Development of Smart Composite Panel with Optical Fiber Sensors
Design and Control of Three-DOF Dielectric Polymer Actuator
Characterization of Electro-Active Paper Composite
Cure Monitoring and Stress-Strain Sensing of Single-Carbon Fiber Composites by the Measurement of Electrical Resistance
Limit Load Interaction of Welded Piping Branch Junctions Subjected to Combined Internal Pressure and Bending
Finite Element Analysis and Integrity Assessment of Y-Branch
Crack Opening/Sliding Morphology and Stress Intensity Factor of Slant Fatigue Crack
Boundary Element Analysis of an Interface Crack in a Bonded Viscoelastic Thin Film
Finite Element Analysis of Fracture Process of Weld Specimen
Application of Discrete Hamilton's Equation for Parallel Processing of Impact Problems
Analysis of Failure Criterion for Combustion Chamber with Notch Using Effective Distance
Basic Concept on Structural Design Criteria for Zirconia Ceramics Applying to Nuclear Components
Finite Element Analysis of Hydrogen Concentration for Blister Growth Estimation of CANDU Pressure Tube
Fatigue Life Prediction of Ship Welded Materials
Numerical Approach to Fracture Spacing in Two Layered Material
Effect of Strength Mismatch on Ductile Crack Initiation Behavior from Notch Root under Static Loading
Fatigue Life Evaluation Model for Welded Joints with Residual Stresses
Ductile to Brittle Transition of Pure Al Sheet Constrained by Parallel Bi-Interface with High Strength Al Alloy
Fatigue Analysis of Nuclear Welded Structures Based on Structural Stress and Elasto-Plastic Fracture Mechanics Approach
Fatigue Crack Initiation and Propagation Life of Welded Joints
Influence of Specimen Configuration and TIG Welding on Fracture Toughness of RAFs (JLF-1)
Influence of Dwell Time on Creep-Fatigue Crack Growth Behavior of P92 Steel Weldment at High Temperature
Mechanical and Electrical Properties of Sn-3.5Ag Solder/Cu BGA Packages during Multiple Reflows
Experimental Investigation on the Interface Properties Evaluation in Piezoelectric Layered Structures by Love Waves Propagation
Nonlinear Ultrasonic Method to Detect Micro-Delamination in Electronic Packaging
Geometry Sensitivity Analyses of Microstructures of IC Packages on Passivation Cracking
Effects of Microstructure on Material Behaviors of Solder Alloys
A Comparative Study of The Fatigue Behavior of SnAgCu and SnPb Solder Joints
Diagram of Electromigration Pattern in Eutectic Pb-Sn and Pb-Free Solders
Fracture Mechanic Analysis for Package Delamination
Analysis of the Test Parameters in the Shear Test of BGA Solder Joints
Shear Strength of Fluxless Solder Joints between Sn and In Bumps
Investigations of Interfacial Reaction and Shear Strength between Pb-Free Flip Chip Solder and Electroplated Cu UBM
Metal Leadframe Surface Cleaning Prior to Electroplating by Atmospheric Pressure Glow Discharge Plasma
Fabrication of Bi-Te Based Thermoelectric Semiconductors by Using Hybrid Powders
Time-Dependent Cyclic Deformation and Failure Behavior and Its Damage Coupled Simulation for Solder Alloy 63Sn-37Pb
Chip Warpage Damage Model for ACA Film Type Electronic Packages
Reliability Characterization of Organic Solderability Preservatives (OSP) of IC Packages by Drop and Cyclic Bend Test
Vibration Reliability in Flip Chip Package
Tensile Stress-Strain Curves Modeling of Four Kinds of Solders with Temperature and Rate Dependence
Optimal Structural Design of Multi Chip Package to Reduce the Failure in Substrate
Bonding Parameters of Anisotropic Conductive Adhesive Film and Peeling Strength
Effects of Hydrogen Gas Environment on Non-Propagation Phenomena of a Type 304 Austenitic Stainless Steel
Susceptibility of Automobile Spring Steels to Wet-Dry Cyclic Corrosion Induced Environmental Embrittlement
Effects of Environmental Factors on Stress Corrosion Cracking of Pipeline Steels
Evaluation of Mechanical Properties of Alumina Green Compact during Sintering at Relative Low Temperature
Evaluation of Cracking Behavior of SPV50Q High Strength Steel Weldment in Wet H2S Containing Environment
Environmental Effects on Stress Corrosion Cracking Susceptibility of Cr-Mo Steel Tubes in Steam Generators
Study on Mechanical Behaviors of 16MnR Steel after Long Term Used as Liquefied Petroleum Gas Vessel
Environmental Fatigue Crack Propagation Behavior of Cast Stainless Steels under PWR Condition
Stress Corrosion Crack Tests of 16MnR Low Alloy Steel in Anhydrous Ammonia Environment
Development of Small Punch Test for EAC Evaluation
Effect of Grain Boundary Microchemistry on IGSCC of Alloy 132 in a Simulated BWR Environment
Effects of Cold Working and Heat Treatment on Caustic Stress Corrosion Cracking of Alloy 800M
Estimation Method of SCC Initiation Site Based on Electrochemical Transients
Investigation on Fatigue Behavior of Zircaloy -4 Alloy in Room Temperature and 380°C Condition
Verification of Mechanical Properties of A V-4Cr-4Ti Alloy Using Finite Element Method
Finite Element Modeling of Damage Formation in Rubber-Toughened Polymer
Implementation of a Mesoscopic Mechanical Model for the Shear Fracture Process Analysis of Masonry
Computational Evaluation of Micro- to Macroscopic Mechanical Characteristics of Low-Carbon TRIP Steel under Different Conditions
Numerical Studies on Damage Evolution of Notched Round-Bar with Welding Mechanical Heterogeneity
Yield Criterion and Constitutive Model for Ductile Materials with Hydrogen and Deformation Induced Voids
The Constitutive Behavior of Metallic Foams Using Nanoindentation Technique and FE Modeling
Crack Growth Simulation of Arbitrarily Shaped 3D Cracks Using Finite Element Alternating Method
Method for Determining a Polynomial Constitutive Equation with Temperature and Strain-Rate Dependence by the AIC
Influence of Stress Parallel to Crack Plan on Subcritical Crack Propagation in Glass under Biaxial Stress
Applied Research of Fracture for Brass in Extra-Low Cycle Inverse Rotating Bending Fatigue
Room Temperature Creep and Its Influence on Fatigue Crack Growth in a 304 Stainless Steel
Evaluation of the Fretting Fatigue Behavior of Ti-6Al-4V Alloy
A Study on the Failure Analysis of Turbine Blade under Fatigue Load Using X-Ray Fractography
Microstructure and Creep Behavior of BN/Al (-Mg) Metal Matrix Composite
Research on Microstructures of Alloyed Layer by Plasma Surface Alloying with Tungsten and Molybdenum
3-D Micromechanics Model for Progressive Failure Analysis of Laminated Cylindrical Composite Shell
Mechanisms of Fatigue Crack Growth in WC-Co Cemented Carbides
Tensile Pre-Strain Effects on Torsional Fatigue Properties of Medium Carbon Steels
Influence of Hydrogen on Tensile Property of Ti-6Al-4V
Applied Research of Fracture for Brass in Extra-Low Cycle Rotating Bending Fatigue
Thermomechanical Fatigue Behavior of the Ferritic Stainless Steel
Plasticity-Induced Martensitic Phase Transformation in Fatigue of Unnotched SUS304 Plates
An Initial Small Fatigue Crack by Compressive Stress
Influence of Microstructure on Small Crack Behavior
Fatigue Properties of Smart Electrorheological Materials
Microstructure and Mechanical Properties of A 1.4%C Ultra High Carbon Steel
Study on Temper Embrittlement of Phosphorus in Steel 12Cr1MoV
In Situ Observation of Fracture of Aluminium Foam Using Synchrotron X-Ray Microtomography
Three-Dimensional Material Failure Process Analysis
Applied Research of Fracture for Three-Points Bending to Blanking of Tool Steel
Experimental Limit Load of Forged Piping Branch Junctions and Comparison with Existing Solutions
Principal Stress Separation Using a Combination of Photoelasticity and Thermoelastic Stress Analysis under Biaxial Stress
Effect of Heat Treatment on the Properties of Inconel X-750
Research on Intercritical Rolling of 0.2C-1.5Si-1.5Mn TRIP Steels by Thermo-Mechanical Simulation
Micro Behavior Study of Non-Metallic Inclusion in High Strength Shaft Steel
Mechanism of Delamination and Its Effects on Fracture of Surface Crack Bodies in Ductile Pipeline Steel
Analysis of Underground Pipelines Subjected to Frost Heaving Forces
Effect of the Elastic Restraint by Adjacent Plate Component on the Local Buckling of Orthotropic Box-Shape Flexural Members
Buckling Behavior of Pultruded Monosymmetric Members
Prediction of Elastic Properties in Discontinuous Composite Materials
Finite Element Simulation for Tensile Properties of δ-Al2O3f/Al Alloy Composites with Thermal Residual Stress Considered
Determination of Singular Residual Stresses in Epoxy Layer Deposited on Concrete Substrate
Transient Dynamic Response of Delaminated Composite Twisted Cylindrical Shells Subjected to Low Velocity Impact
Fatigue Behavior of Impacted Plain-Weave Glass/Epoxy Composites under Tensile Fatigue Loading
Impact Behavior Analysis of PC/ABS (50/50) Blends
A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects
Impact Analysis and Test on the Spacer Grid Assembly for PWRs
Influence of Confinement Condition on Particle Impact Damage in Soda-Lime Glass
Effect of Particle Impact Velocity on Cone Crack Shape in Ceramic Material
Impact Fracture Behavior in Alumina Ceramic Plates
Finite Element Analysis of Brain Damage due to Impact Force with a Three Dimensional Head Model
Simulation and Experimental Investigation of Impact Damage in Composite Shell
Energy Absorption Characteristics on Aluminum Beams Strengthened with CFRP Laminates under Impact Loading
Analysis Technology on the Thick Plate Free Drop Impact of the Cask for Radioactive Material Transport
Impact Fracture Behavior of Zr-Based Bulk Metallic Glass Using Subsize Charpy Specimen
Prediction of Slip Displacement in Nuclear Fuel Fretting Wear
A Biomimetic Method of Hydroxyapatite Powders Synthesized in Simulated Body Fluid
Analysis of the Failure of Turbocharger Shaft Bearing in Diesel Engines
A Fundamental Study of the Tribological Characteristics of Sheave Steel against a Wire Rope
Friction and Wear Characteristics for Automotive Leaf Spring Materials due to the Influence of the Residual Stress
Experimental Study on the Wear Behavior of Nuclear Fuel Rod in High Temperature Water Environment
Effect of Micro-Addition Rare Earth and Chrome on Friction and Wear Behavior of Boronized Layer
Finite Element Analysis of Fretting Wear Problems in Consideration of Frictional Contact
Fretting Wear Characteristics of INCONEL 690 and INCONEL 600 in Water Environment
Development of Wear Test System for Steam Generator Tubes in Nuclear Power Plants
Wear Characteristics of INCONEL 690 and INCONEL 600 in Elevated Temperature
Tribological Behavior of Multilayered WC-Ti1-xAlxN Coatings Deposited by Cathodic Arc Deposition Process on High Speed Steel
Compression Characteristic and Tensile Property in an (Alpha+Beta)-Type Titanium Alloy at High Temperature
Effect of Film Thickness on Fatigue Strength of TiAl Alloy Coated with TiAlN Film at Elevated Temperature
Comparison of Creep Behavior of 2.25Cr-1.6W/Mod. 9Cr-1Mo Dissimilar Weld Joint with Each Matching Filler Metal
High Temperature Creep, Fatigue and Creep/Fatigue Interaction Behavior of γ' Strengthened Austenitic Iron-Base Superalloy
On the Creep Fracture Toughness of 2¼Cr1Mo Steel
Evaluation of DBTT and Creep Properties of Aged Main Valve Casing by Using Small Punch Specimens
Elevated Temperature Mechanical Properties of a Directionally Solidified NiAl/Cr(Mo)-Hf Alloy
Tensile Behavior of 17-4PH Stainless Steel under Rapid Heating
Experimental Study of the High Temperature Mechanical Behaviors of TLP Bonding of Two Ni-Base Single Crystals
Characterization of High Temperature Thermomechanical Fatigue Properties for Particle Reinforced Composites
Strength Characteristics and Deformation Behavior of Aluminum Honeycomb Sandwich Plates under Three-Point Bending Loads
Suggestion of the Delamination Aspect Ratio in GLARE
Influence of Material Composition on Mechanical Properties and Fracture Behavior of Ceramic-Metal Composites
Effective Thermal Conductivity of Functionally Graded Composite with Arbitrary Geometry of Particulate
Effects of Matrix on Mechanical Property Test Bamboo Fiber Composite Materials
Electro-Active Papers for Remotely-Driven Smart Actuators
Electric Resistance Property of a Conducting Shape Memory Polyurethane Actuator
Optimal Grinding Condition of ZrO2 Ferrule for Optical Fiber Connector Using the Taguchi Method
Mechanical Behavior of Shape Memory Alloy Composites
Effect of Microstructure on Fatigue Crack Growth Resistance of Magnesium Alloy under Biaxial Stress
Mixed Mode Fatigue Crack Propagation in 7075-T6 Aluminum Sheet Material
A Model for Determining Crack Opening Stress Intensity Factor Ratio under Tri-Axial Stress State
A Study on the Fracture Behavior of Magnesium and Aluminium Alloy under Dynamic Biaxial Stress
A Horizontal Vibration Wave Model for High Speed Elevators
Mode II Fatigue Crack Behavior in Compact Tension Shear Specimen
Influences of Isotropic and Anisotropic Material Properties on Stress Intensity Factors of the Crack Tip under Biaxial Stress
Effect of Stress State on Mode II Stable Crack Extension
Effect of Mode Mixty on Interfacial Fracture Toughness of Si/Organic Polymer
Numerical Approach to Fracture of Glass under Biaxial Stress
Behavior of Fatigue Crack around a Hole under Biaxial Loading: Effect of Biaxial Static Load
Mechanical Properties of LaB6-ZrB2 Composites
Vibration Characteristics of the FIV Test Loop
Evaluation of Nuclear Piping Failure Frequency in Korean Pressurized Water Reactors
Bottom-Mounted Nozzle Failure Modes of a Nuclear Reactor Pressure Vessel under Severe Accident Conditions
Alternative Fatigue Evaluation of Nuclear Piping Designed by ANSI B31.1 Code
Analysis Technology on the Temperature and Thermal Stress of the Cask for Radioactive Material Transport
Determination of the Key Microstructural Parameter for the Cleavage Fracture Toughness of Reactor Pressure Vessel Steels in the Transition Region
Surface Crack Behavior in Socket Weld of Nuclear Piping under Fatigue Loading Condition
Critical Temperatures for Initiating and Arresting Delayed Hydride Cracking in a Zr-2.5Nb Pressure Tube
Evaluation of the Fracture Characteristics with Thermal Aging on Dissimilar Welds in Reactor Coolant System
Annealing Effect of Thermal Conductivity on Thermal Stress Induced Fracture of Nuclear Graphite
Plastic Limit Load Solutions for Surface Crack in the Steam Generator Tubes
The Mechanical Property of TiN Film Deposited on N+-Implanted Aluminum by Magnetron Sputtering
Analysis of Cracking and Delamination of Sputtered Thin Films during Wear Process
Tribological Properties of Artificial Hip Joint Material Coated with DLC Thin Film in the Simulated Body Environment
A Methodology for Damage Strength Evaluation of a Single Biomimetic Microcapsule
Adhesion Analysis Considering Surface Energy and Surface Stresses
Chemical Modification of Diamond Films on Pure Titanium Deposited by MPCVD Method
An Evaluation of Appropriate Probabilistic S-N Curve for the Turbine Blade Steel in the Low Pressure Steam
Z-Parameter Method for Life Prediction in Low Carbon Steels
A New Stochastic Model for Prediction of Fatigue Crack Propagation
Fatigue Life Evaluation of Vehicle Wheel Bolts under Random Loading
Automotive Component Fatigue Life Estimation by Frequency Domain Approach
Reliability Evaluation of Interfacial Shear Strength on Single Carbon-Fiber/Rubber-Modified Epoxy Resin System
Study on Reliability Assessment Procedures for Torsion Spring of Vehicle Door Latch
A Study on Automatic Belt Tensioner Life Evaluation in Accessory Belt System
Reliability Evaluation of Hinges Used in Electronic Communication Devices
Determination of the Deposition Characteristics and Luminance Decay Mechanisms in OLED and their Implications in Reliability Assessment
Reliability Estimation of Solder Joint Utilizing Thermal Fatigue Models
The Assessment of Influence of the Design Factors on the Reliability of BGA Solder Joints
Reliability Analysis of ACF Interconnection Assembly Process Using FEM
Stress Corrosion Cracking Life Estimation of Hold-Down Spring Screw for Nuclear Fuel Assembly
Proposal of New Biaxial Fatigue Life Prediction Parameter by Using the Effective Shear Stress for CF8M Stainless Steels
Very Long Life Fatigue Behavior of Bearing Steel AISI 52100
Failure Analysis of Heterogeneous Microstructures in Ti-6Al-4V Alloy Using Probability Functions
Creep Life Evaluation by Micro-Cavities
The Random Effects of the Seepage Field on the Slope Reliability
A Study on Procedures of the Accelerated Life Testing for Hose Assemblies
Safety Diagnosis of Collided Subway Electric Multiple Units (EMUs)
Barrier Function Method in Reliability Based Design Optimization
Effect of Shock Wave on Reliability of Buried Pipelines
Reliability Optimum Design of NWG-Type Oil-Submerged Planetary Gear Reducer
Structural Topology Design Considering Reliability
Failure Analysis on Rubber-Modified Epoxy Resin under Various Loading Speed Conditions
Reliability Assessment on Thickness Effect in Fatigue Crack Growth
The Improvement of High Cycle Fatigue Properties of AC4CH Alloy with Shot Peening Treatment
Treatment of Cut Slope and Analysis of its Reliability
A Unified Method for the Prediction of the Fatigue Strength of Small-Hole-Containing Components under Combined Loading
Interference Effect of Interaction Cracks Investigated by Photoelastic and Caustics Methods
A Study on the Evaluation of Creep Degradation of High Temperature Pipeline Steel by Non-Destructive Test
Degradation Evaluation of 2.25Cr-1Mo Steel Using Nondestructive Method
Determination of the Young's Modulus and Loss Factor by Acoustic Bending Vibration Methods
Pattern Classification of Acoustic Emission Signals during Wood Drying by Principal Component Analysis and Artificial Neural Network
Experimental Study on the Infrared Information of Metal Specimen when Loaded
On Nondestructive Evaluation of Wood Materials Using Ultrasonic Techniques
Development of a Fiber-Optic Accelerometer for Third-Party Damage Detection
Development of a Fiber-Optic AE Sensor for On-Line Monitoring System
Sub-Surface Crack Detection by Using Laser Induced Transient Stress Wave Propagation
Quality Monitoring of Thermally Degraded Stationary Gas Turbine Blade Material by Surface Wave Technique
An Active Piezo Array Sensor for Elastic Wave Detection
Characteristics of Patch Type Smart-Piezo-Sensor for Smart Structures
Fatigue Crack Propagation Behavior and Degradation Characteristics of STS316L by Nondestructive Evaluation
Modeling of Characteristics of Magneto-Optical Sensor Using FEM and Dipole Model for Nondestructive Evaluation
Change of the Pulsed Eddy Current Signals by the Variation of the Thickness of an Aluminum Specimen
Image Distortion Compensation by Using a Polynomial Model in an X-Ray Digital Tomosynthesis System
Acoustic Emission Technique for Detection of Corrosion-Induced Wire Fracture
Elastic Wave Signal Characteristics of SiC Ceramics with Crack Healing Ability by Wavelet Analysis
A Study on the Laser Conducting Ultrasonic Method for Non-Destructive Evaluation of Welding Part
Development of Eddy Current Test for the Fatigue Behavior in Carbon/Epoxy Tube
Prediction of Ultrasonic Guided Wave Dispersion in Bent Pipes Using Finite Element Analysis and 2-D Fourier Transform
An Automated System for Detection of Through-Wall Cracks in Racks in Steam Generator Tubes
Mode Tuning of Guided Wave in a Seamless Stainless Steel Tube Using an Array Transducer
The Crack Growth Evaluation of A335 P22 Steels by Acoustic Emission
Nondestructive Evaluation in Materials Using Time-Frequency Analysis Methods
Detection of Matrix Cracking of CFRP Using Electrical Resistance Changes
Structural Health Monitoring Systems for a Steel Structure Using an Ambient Vibration
Ultrasonic Detection of Fiber Orientation in Composite Laminates for Use of Vehicular Structures
A New Position Sensor Using a Triangularly Shaped Piezoelectric PVDF Film
Nondestructive Evaluation of Welding Residual Stress in Power Plant Facilities Using Instrumented Indentation Technique
A Nondestructive Testing Method for Crack in Carbon Fiber Reinforced Concrete with Infrared Thermography
Ultrasonic Linear and Nonlinear Parameters in Cyclically Deformed Cu and Cu-35Zn Alloy
Quantitative Evaluation of Crack Size around a Rivet Hole Using an Ultrasonic Lamb Wave through a Neural Network
A Study of Comparison on the Stress Intensity Factor of a High Polymer Material with Cracks, Holes and Inclusions
Determining Representative Stress and Representative Strain in Deriving Indentation Flow Curves Based on Finite Element Analysis
Structural Health Monitoring of Composite Laminates by Using Embedded FBG Optical Fiber Sensors
Real-Time Displacement Monitoring System for High Temperature Steam Pipe of Fossil Power Plant
Diagnosis of Defect Points in Materials Using Infrared Thermography
Long-Range Pipe Monitoring with Elastic Guided Waves
A Study on the Behavior of Ultrasonic Guided Wave Mode in a Pipe Using a Comb Transducer
A Study on the New Static Photoelastic Experimental Hybrid Method
Strength Diagnosis of Large Scale Structure Using Accelerometers
Ultrasonic Transmission Characteristics of Continuous Casting Slab for Medium Carbon Steel
Simultaneous Health Monitoring and Vibration Control of Structures Using Smart Materials
Group Velocity of Lamb Wave S0 Mode in Laminated Unidirectional CFRP Plates
Inversion of Eddy Current Test Signals Obtained from Steam Generator Tubes
Fabrication and Characterization of Capacitive Micromachined Ultrasonic Transducer
Evaluation of Elastic and Creep Properties of Perforated Materials by Finite Element Analysis Imposing Periodic Boundary Conditions
Boundary Element Analysis of Viscoelastic Fracture
Molecular Dynamics Simulation of Nanoindentation on Folded Chain Crystal of Polyethylene
Thermal Stress Analysis for Air Inlet Part of Ramjet
Computer-Aided Static and Dynamic Properties Design of the Frame of Electrical Slag Founding Furnace
Degradation Evaluation of the Gas Turbine Hot-Gas-Path Component
Application and Standard Error Analysis of the Parametric Methods for Predicting the Creep Life of Type 316LN SS
Interaction of Mechanical Loading with Residual Stresses in Pressure Vessels
UV-Irradiation Effects on Interfacial Strength between Thin Ceramic Film and Polymer Substrate
Bending Performance Evaluation of Reinforced Aluminum Square Tube Beams Considering Local Buckling Behavior
AGV System with Dual Motor Drive by Distributed Control
The Mechanism of Postural Balance Control of High-Heeled Women
Joint Reaction Forces during the Recovery of Postural Balance of Human Body
A Study on the Human Impulse Characteristics with Standing Shooting Posture
A Study on the Demonstration Experiment of the Solar Hot Water Heater for Dwellings
Finite Element Simulation of Grinding Stress for a Fiber Optic Connector (Ceramic Ferrule)
Research on a Bionic Fuzzy-PID Vibration Control System for Ultra-Precision Device
Motion and Environment Error Compensation for Ultra-Precision Lathe
Functional Assessment of an Anti-Abrasive Elbow for Particle-Laden Gas Flows
LCD Glass Cleaning by Atmospheric Pressure Glow Discharge Plasma
Local Stability Analysis in Satellite Design
Improvement in Strength of 2024 Al Alloy by Enhanced Solution Treatment
Research on Dynamic Characteristics of Assembled Thin Plates Structure by BEM
On the Study of Effective Breadth for Stiffened Plate under Flexible Support Condition
Influence of Nitriding Treatment on Practical Properties of Eutectoid Steel
The Charpy Notch Impact Test of X70 Pipeline Steel with Delamination Cracks
Effects of Temperature and Loading Rate on Fracture Toughness
Assessment of Geometry Independent Fracture Resistance Characteristics Based on Local Approach
An Experimental Measurement of Toughness Locus for a Ductile Material
The Effect of Sample Preparation upon the Fracture Toughness of Microsized TiAl
Study on the Effect of Compressive Residual Stress on Fracture Toughness of Spring Steel
The Effect of Surface Treatment of Ti-6Al-4V Alloy Specimens
Effect of Interlayer Thickness on Strength and Fracture of Si3N4 and Inconel600 Joint
Shear Strength and Fracture Behavior of SiCw/Al2O3 Composite-Carbon Steel Brazed Joints
Effect of Strain Rate Variation on Fatigue Life of Spot Welded Joint
Effect of Mixing Process on the Fracture Behavior of HA/PLLA Composite Material
A Study on Fracture Toughness of 9Al2O32B·2O3/AC4CH Alloy Composites
Evaluation of Ductile-Brittle Transition of Fracture Toughness by Material Degradation
Evaluation of Fatigue Characteristic of a Real Waterworks Pipe
Experimental Investigation on the Proper Fatigue Parameter of Cyclically Non-Stabilized Materials
A Study on Fatigue Properties of Sc Added Al 2519 Alloy
Experimental Study on Fatigue Crack Growth in a Titanium Alloy
An Experimental Study on Fatigue Crack Propagation under Cyclic Loading with Multiple Overloads
Effect of Cyclic Loading on Crack Propagation of X-70 Pipeline Steel in Near-Neutral pH Solution
Effect of Dynamic Strain Aging on Fatigue Softening Process of H68 Brass
Effect of Plastic Working on Fatigue Properties of Ti-6Al-4V Alloy with Notch
Assessment for Structural Stiffness and Fatigue Life on Self-Piercing Rivet of Car Bodies
Fatigue Properties of Non-Loosening Bolt with Double Screw Mechanism
Damage Characterization of Ceramic Matrix Composites (CMCs) during Tensile Testing
Effect of Sintering Additives on Fabrication Properties of Liquid Phase Sintered SiC
Mechanical Improvement of Multi-Walled Carbon Nanotube/Poly (Methyl Methacrylate) Composites
Microstructure and Toughening Mechanisms in an Al2O3 Ceramic Matrix Composite Dispersed with LiTaO3 Particles
Domain Switching and Crack Tip Opening Stress Variation in Ferroelectric Ceramics
Avalanche Behaviour in Microfracturing Process of 3-D Brittle Disordered Material
Effect of Element Size on Rock Shear Strength and Failure Pattern by Rock Failure Progress Analysis (RFPA2D)
A Numerical Investigation of the Progressive Failure of Jointed Rock Slope Subjected to Transient Seepage
The Failure and Falling of the Rock Mass in the Underground Mining
Nonlinear Vibration Characteristics of Fatigue Damaged Reinforced Concrete Structures
Numerical Study on the Fracture Evolution around Cavities in Rock
Numerical Study of Elastic-Brittle Failure of Notched Openings in Rocks
Numerical Approach to Investigating Pre-Existed Cracks in Rocks
Numerical Study on Shear Strength and Failure Pattern of Jointed Rock under Shear Testing
Analytic Analysis of the Influence of Friction on the Temperature Field of Rock Specimens
A Numerical Study of Pillar Failure Based on a Cusp-Type Catastrophe Model
Fracture Behavior and Water Migration in Heterogeneous and Porous Rocks
Experimental Study on the Mechanical Characteristics of Cracked Rockmass under Lateral Constraints
Numerical Studies of the Influence of Heterogeneity on Rock Failure and Induced Earthquake Precursors
Numerical Simulation of Crack Development in Reinforced Concrete Structures under Eccentric Loading
Fracture Characteristics of Intermittent Jointed Rock Masses under Blast Loading
Adjustment for Temperature and Deformation of Concrete Beams
Web-Based Expert System in Fatigue and Fracture Analysis
Development of Integrated Materials Database System for Plant Facilities Maintenance & Optimization
Risk-Based Inspection of Refinery Units: A Practical Application
System Oriented Plant Maintenance
Development of Web Based Power Plant Maintenance Management System
Mechanical Properties of CaB6 Sintered Body
Effect of Hydrogen Absorption on the Mechanical Properties of Palladium
Study on Structural Integrity of C/C Composite Using as Core Restraint Mechanism in HTGR
Effects of Water Absorption Cycles on Fracture Toughness in Laminated CFRP Composites
Robust Design of Lamination on Flexural Properties of CFRP
Shape Optimization of Cutouts in Laminated Composite Plates Using Solid Element
A Study on the Mechanical Properties of the Honeycomb Sandwich Composites made by VARTM
The Effect of a Honeycomb Core on the Mechanical Properties of Composite Sandwich Plates
Design of Transversely Isotropic Tapered Plate Element in FRP Flexural Members
Mechanical Properties and Microstructure of SUS304 Brazed Joint with Ni-Based Filler Metals Added Cr Powder
Diffusion Bonding of Al 6061 Alloys Using an Eutectic Reaction of Al-Ag-Cu
Effect of Nanoscale SiC Particles on Strength Distribution of Joined Si3N4 to Inconel Alloy
Active In-Process Control of Welding Distortion by Reverse-Side Heating
Effect of Liquid-Phase-Impact Diffusion Welding Parameters on the Strength of Welded Joints of Aluminum Matrix Composite SiCp/ZL101
High Temperature Performance of 316L-SS Joint Produced by Diffusion Bonding
Automated Fatigue Life Assessment for Welded Cruciform Joint Considering Welding Residual Stress
Characterization of Oxide Film Formed on Austenitic Stainless Steel by In Situ Micro Raman Spectroscopy
Laser Surface Cladding of Al-Si Alloy
High-Speed Bonding of Resin-Coated Cu Wire and Sn Electrode with Ultrasonic Bonding for High-Frequency Chip Coil
The Effect of External Electromagnetic Force in Gas Metal Arc Welding on the Transfer Mode
On Mechanical Properties of Dissimilar Friction Welded Steel Bars
Analysis of Spherical Void Growth and Coalescence in Metal Plastic Straining Process
The Effect of Vacuum Thermal Cycling on LF6 Aluminium Alloy Welded Joints
Effects of Sea Water Immersion and Temperature on the Strength of Spot-Welded Steel Plates
Evaluation of Mechanical Properties for Narrow-Gap Weld Zone in Reactor Coolant Loop
Effects of Current and Voltage on Welding Strength of Lap Joint with CO2 Welding Process
Influence of Surface Finish of Cu Electrode on Shear Strength and Microstructure of Solder Joint with Sn-3Ag-0.5Cu
Chemical Shrinkage and Residual Stresses in Laminated Composites during Cure
Effect of Process Variables on Microstructure and Mechanical Properties of Wide-Gap Brazed IN738 Superalloy
Evaluation of Fatigue Strength and Spot Weldability of High Strength Steel Sheet for Light Weight Automobile Body
The Cause Examination of the Crack of the End Beam for Welding Structure Type Bogie
Effect of Fiber Orientation on the Tensile Strength in Fiber-Reinforced Polymeric Composite Materials
Smart Cure Monitoring Method of Carbon/Epoxy Laminates Using Electric Capacitance Change with Applied Alternating Current Frequency
Experimental Study on the Mechanical Properties of Satin Carbon Fabric/Epoxy Composites
Mesoscopic Modeling of Deformation Behavior of Semi-Crystalline Polymer
A Study of Deformation Behavior in Polymer
Control Effect on Fatigue Crack Propagation of TiNi Fiber Reinforced PMMA Composites
Advances in Fracture and Strength
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
