Chapter
Research of Dressing Technology on Saucer Resin Bond Diamond Wheel
Development of Nanocrystalline Diamond Films and Their Performances
Precise and Quantitative Evaluation of the Adhesive Strength of Diamond Thin Films by Bulge/Blister Test
Research on Diamond Enhanced Rare-Earth and Iron-Rich Carbide Tungsten Composite Button and Its Bit
Simulation of the System Silicon Substrate-Thin CBN Film
Study of the Sawing Performance of Diamond Segments with Different Additives in Circular Sawing
Multiphase Tailoring and Design of an Advanced Ceramic Material
Research for Discontinuous Grinding Wheel with Multi-Porous Grooves
Technical Parameters and Wear Resistibility of Diamond Wire-Saw in Granite Cutting
New Type Self-Center and Flexible Honing and Polishing Tool
Design Theory and Experiment of the Step Face Milling Cutter Based on Free Cutting
An Algorithm for Dynamic Characteristics of High-Speed Machining Tool System with Rotating Symmetry
The Mechanical Performance of Diamond Saw Blades with Special Structure
Grinding of Granite with Three Kinds of Diamond Tools
Form and Distribution Characterization of Reaction Products at the Brazing Interface Between Ni-Cr Alloy and Diamond
Application and Optimum Design of Diamond Saw Blade with Composite Matrix
Research on Quantitative Relationship Between Property of Diamond Sawblade and Formula Parameters of Segment
Behavior Monitoring of Small-Diameter Milling-Cutter during High-Speed Milling
Thermal Models of High Efficiency Deep Grinding and Grinding Temperature
Determination of the Grinding Area and Allowance in the Radome Grinding
Molecular Dynamics Simulation for Nanohardness Experiments Based on Single Crystal Silicon Substrate
The Geometrical Analysis of End-Face Cylindrical Grinding Hot Roller with Cup-Type CBN Wheel
Study on the Wear Capability of Several Kinds of New-Style Glue Rolls
Study on Sphere Shaping Mechanism of Ceramic Ball for Lapping Process
Discontinuous Grinding of Polycrystalline Diamond with Slotted Diamond Wheels
A New Method for Suppressing the Grinding Chatter - Limited Random Feed Method
Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes
Towards a Deep Understanding of Molecular Dynamics Simulation in Nanometric Machining
Study on Service Performance Evaluation of Grinding Coolants
Quantitative Study of Coated Diamond Sawing
Surface Quality Studies with Respect to Grinding Burn of New Typical Nickel-Based Superalloy
Research on Relationships Between Surface Fracture States and Surface Roughness Dispersion Range in Ultrasonic Grinding ZrO2
Surface Hardness after High Efficiency Deep Grinding for Hardened Steel
Application of Pitch Arc Moving Heat Source Model in Grinding Temperature Field of Disk Workpiece
Theoretical Analysis of Surface Grinding Temperature Field by Cup Wheel
Machinability Evaluation of Ce-ZrO2/CePO4 Ceramics
Processing Design in Machining Ball-End Cutter with a Parallel Grinding Machine
Electrolytic In-Process Dressing (ELID) and Super-Precision Grinding for the Ring Raceway of Ball Bearings
Critical Grinding Condition Model for Predicting Grinding Induced Lateral Cracks in Nanostructured Ceramic Coatings
Mechanism of Burr Formation in Milling
The Effect of Wheel Velocity and Shape on Rotating Airflow in Super-High-Speed Grinding
Study on On-Line Monitoring Method for Grinding Quality
Research on Ultrasonic Vibration Drill-Grinding Acoustic System of Micro-Hole
Research on Ultrasonic Honing Performance of ZrO2 Engineering Ceramics Using Diamond Oil-Stone with Coarse Grains
Study of Ultra-High Speed Grinding Mechanism with Molecular Dynamics Simulation
Study on Spherical Face Grinding of Gcr15-Bearing-Steel Spindle Pivot by CBN Wheels
Research on the Influence of the Diamond Wheel Wears on Machining Accuracy during Large Depth-to-Diameter Ratio Ultra-Precision Aspheric Grinding Process
Material Removal Mechanisms in Grinding Aeronautical Alloys, Part 1: Experiments and Results
Material Removal Mechanisms in Grinding Aeronautical Alloys, Part 2: Analysis and Discussion
Research on Dynamic Forming of Chip's Path in Virtual Reality Environment
Intelligent Optimization Control of Workpiece Deformation for Traverse Grinding
A Method of Monitoring Large Power Grinding by Using the Current Signal of the Motorized Spindle
A Rise in Temperature by Moving Planar Sources of Heat on the Rake Face for the Waved-Edge Milling Inserts
Study on Material Removal Mechanism in Creep Feed Grinding of Alumina Ceramics
Grinding Chatter and Ground Surface Waviness in Surface Grinding Process
Geometrical Analysis of Roller Grinding with CBN Cup-Shaped Grinding Wheel's Face
Molecular Dynamics Simulation of Nanometric Grinding - the Effect of Crystal Anisotropy on the Quality of Machined Surface
Effects of Grinding on the Wear Resistance of ZTM Composites
Research on High-Speed Precision Grinding of Non-Circular Parts Based on PMAC
Study on Improving Wearability of Ductile Iron QT800-2 by Laser Compound Treatments
CAD System of Forming Grinding Wheel for Relief Milling Cutter with High Accuracy
Effects of Cooling Methods on Temperatures in Vertical Grinding Stone
FEM Simulation of Chip Formation Mechanism in NC Turning
Sawing Trajectory and Mechanism of Diamond Wire Saw
An Inverse Heat Conduction Problem in Controlling the Transient Cutting Temperature
A New Theoretical Model of Material Removal for Diamond Wheel Drilling Hard and Brittle Materials
Mathematical Models and Grinding Research for Step Drill
The Influence of Cutting Edge Orientation and Spindle Motion Error on Machined Surface in Milling
Establishing Model and Design on the 3-D Chip Breaker of Carbide Indexable Inserts
The Substitution of Fine Turning for Grinding and the Study of Material Removal Mechanisms in Working of Engineering Ceramics
Research on Effect Conditions of Micro Vibration in Ultra-Precision Grinding of Aspheric Surface
Machinability of an Ultra High Strength Alloy Steel in Milling Processing
Experimental Study on Cutting Force in End Milling of Stainless Steel
High-Speed Milling of Cast Iron with Ceramic and PCBN Tools
Cutting Forces in High-Speed Milling of a Close Alpha Titanium Alloy
The Stress Wave Propagation and Crack Formation in Vibratory Metal Cutting Process
The Impact of Tool Materials and Cutting Parameters on Surface Roughness in High-Speed Face-Milling
Approach of Realizing Material Removal at Nanometer Level in Ultraprecision Polishing
Shaping of Green Ceramic Balls and Precision Lapping of Ceramic Balls for Ceramic Ball Bearings
Study on Eliminating Mechanism of Surface Metal in Nano-Polishing Process
Change of Residual Stress after Grinding Al2O3 Ceramics
Effects of Grinding Parameters on Microirregularities of Ground Surface
Analytical Study of Temperatures in Sawing with Segmented Blades
Primary Study on Instantaneous Fabricating Mechanism of Tungsten Microelectrode Based on Single Discharge and Its Application
Investigation into the Effects of Laser Surface Hardening on CrWMn Steel
Smoothing of Thick Diamond Film Prepared by Electron-Assisted CVD
Pulse Electrochemical Abrasive Lapping Process of EDM Surface
Some Key Points for EACVD Thick Diamond Film Preparation
Micro-Machining the Surface of Metallic Workpiece by Pulsed YAG Laser
Fabrication of PEI Composite Magnetic Ion Exchange Resins
Magnetic Abrasive Finishing of Non-Ferromagnetic Tube
Research on Local Resonance of Acoustic System by Statistical Energy Analysis in Ultrasonic Vibration Lapping
The Virtual Quick Design of the Grinding Equipment for the Stone Products
Experimental Equipment for Surface Finishing Precise Hole through Gas-Particle Two-Phase Swirling Flow
Basic Principle and Theoretical Research on the Surface Finishing of Precise Hole through Gas-Particle Two-Phase Swirling Flow
Shot Blast Texturing Technique and Equipment for Giant Stainless Molding Board
Experimental Studies on the New Technologies of Plasma Arc Spray Forming
Research on a Micro EDM Equipment and Its Application
On Characteristics of Flow-Field and Interelectrode Gap in Pulse Electrochemical Finishing (PECF)
Research on Micro Machining Using AFM Diamond Tip
Gap Characteristics of ECCEM with Rotational Cathode and Error Computation for Finishing Ruled Surface
An Experimental Research on Mixed Abrasive Water Jet Cutting Concrete
A Surface Modification Method by Using EDM
Pulse Electroforming of Nanocrystalline Ni-Mn Alloy
Ultra-High Speed Pulsed Water Jet - A Potential Tool for Stone Materials Machining
Vibration Characteristics of Piezoelectric Micro Displacement Actuator Driven Directly for Ultrasonic Machining
A Study on the New Method of Laser Scratch Testing Technique to Characterize Interfacial Adhesion Between Thin Film and Substrate
Study on Internal Magnetic Abrasive Finishing of Thin and Long Austenitic Stainless Steel Tube
Comparative Study on the Magnetic-Abrading and the Electrolytic-Magnetic-Abrading Processes
Research on Magnetic Abrasive Finishing for the Free Form Surface of Mould by 5-DOF Parallel Virtual Axis Machine Tool
Development and Investigation of Ferromagnetic Magneto Material in Magnetic Lapping Technology
Research on the Cutting Principle of New Non-Conventional Technology —— Efficiency Ultrasonic Honing
Study on the Surface Quality of LiNbO3 Wafer by CMP
Present Situation and Developing Trend of Abrasive Air Jet Micromachining
Study on Magnetorheological Surface Finishing
The Technology of Finishing Process of Die Space Based upon Magnetic Abrasive Finishing
Surface Roughness of Optical Glass Under Magnetorheological Finishing
Controlling Parameters for Polymer Melting and Extrusion in FDM
Study of the Shape Deposition Manufacturing of Polymer Parts
Study on the CNC Grinding Machine Tool for the Radome
H∞/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine
Study on the Communication between Single Parameter Profilometer and PC
Servo Stiffness of the High Velocity Linear Motor Feed Drives
Application of Complex Shifted Morlet Wavelet in Vibration Monitoring of Spindle Bearing of Crank Shaft Grinder
The Image Texture Analysis of the Turning Workpieces Based on FBM Model for TCM
A Hydraulic Elastic Feed Drive for Fine Grinding of Non-Circular Element
Controllable Compliance Device for Internal Grinding Chatter Suppression
Research on Intelligent CNC Platform Based on Hierarchical and Distributed Architecture for Grinding Machine
Research on Control Strategy for Grinding Machine of Radome
A Micro-Feed Actuator for Ultra-Precision Grinding of Brittle Materials
Detection and Analysis on the Texture-Edges of Machined Surface Images Based on Wavelets
A New Vertical-Horizontal Conversion Parallel Machine Tool
Enhancing Machine Accuracy by Error Compensation Decoupling for Five-Axis CNC Machine Tool
The Research on Key Technologies of Numerical Control Cam Grinding Machine Tool
Relative Coefficient Method for Rotor Balancing and Its Performing with Dynamic Signal Analyzer
Robust Modeling and Real Time Compensation for the Thermal Error on a Large Number of CNC Turning Centers
A New Algorithm for Extracting Image Edges and Its Application in Tool Condition Monitoring System
A New Algorithm of Adaptive Fuzzy Control in Milling
Conceptual Design Based on the Divergent Tree Method for Tool Torage
Study of Posture Optimization of Polishing Tool for Robotic Free-Form Surfaces Ultrasonic Polishing
Data Processing in Condition Monitoring Intelligent Modeling
Computer Aided Design for the Extrusion Tap
Industrial Design Management and Culture Based on Conceptual Design
Hybrid Vibration Isolation of Inertial Vibration Feeders
Temperature Measurement in High Speed Milling Ti6Al4V
Optimization of Cutting Parameters in High Speed Milling of Thin-Walled Structure Components
High Efficiency Milling of Thin-Walled Components of Airplane
Research of Uncut Free Pocketing Tool-Path Generation Algorithm for High-Speed Milling
Cutting Forces in the Milling of Inconel 718
Development of Case-Based Database for High-Speed Machining
Finite Element Analysis on Novel High-Speed Hybrid Bearing
Connection Performance of Spindle/Toolholder Interface under High Rotational Speed
Advances in Modeling Technology for High-Speed Machining Process
Dynamic Modeling for High-Speed Milling System with Centrifugal Force and Gyroscopic Effect
Development of Diamond-Coated Drills for High-Speed Machining SiC Particles Reinforced Aluminum-Matrix Composite
Wear Characteristics of Micro-End Mill in High-Speed Milling of Graphite Electrode
Study on the Performance of HSK in High-Speed Machining and Its Numerical Simulation
Study on the Forming Mechanism of the Cutting-Direction Burr in Metal Cutting
Advances in Grinding and Abrasive Processes
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
