Chapter
Forming and Control of Feed-Direction Burr in Drilling
Study on the Shaping Law of Precision Numerical Controlled Electrochemical Contour Evolution Machining
The Key Techniques of Novel Miniaturized Ultrasonic Motor and its Application in Micro-EDM
A FEM and Experiment Study on High Speed Machining of Nickel-Based Superalloy GH4169
Mechano-Chemical Modification of Nanodiamond with GW
Analysis of Interlayer between WC–Co and CVD Diamond Film
Effect of Fabrication Parameters on Mechanical Properties of Al2O3 Ceramic Tool Materials
Cutting Performances, Mechanical Property and Microstructure of Ultra-Fine Grade Ti (C,N)-Based Cermets
Analysis of the Axial Tensile Properties of Multidirectional Filament Wound Tubes
Dispersive Characteristics of Multi-Phase and Multi-Scale Nanocomposite Ceramic Powders
Research on the Stress Intensity Factor of the Crack Parallel to and Lying on the Interface of Cermet Cladding Parts
Study of the Thermal and Intrinsic Stress of Large Area Diamond Film Prepared by HFCVD
Development of Self-Toughening Silicon Nitride Matrix Nanocomposite Ceramic Tools and Cutting Performance
Research on the Advanced Ceramic Die Materials and Their Properties
Effect of Boron Concentration on Adhesion and Cutting Performance of Diamond-Coated Cemented Carbide Tools
Surface Properties of 3000°C High Melting Point Material by Powder Mixed EDM
Experimental Study of Mechanical Properties of Electroformed Nanocrystalline Ni-Mn Alloys
Micro-Forming Process and Microstructure of Deposit by Using Micro EDM Deposition in Air
Study on the Cutting Technology Based on Green Manufacturing
Development and Application of Cermet Cutting Tools Material
Development & Application of Polycrystal Cubic Boron Nitride Cutting Tool Material
The Effect of Superheated Water Vapor as Coolant and Lubricant on Chip Formation of Difficult-to-Cut Materials in Green Cutting
Study of Experiments on Cutting Difficult-to-Machine Materials with Ultrafine-Grained Waved-Edge Milling Insert
The Influence of Material Constitutive Constants on Numerical Simulation of Orthogonal Cutting of Titanium Alloy Ti6Al4V
Effect of Chamfered PCBN Tool Edge Geometries on Hard Turning Process
Experimental Research on Orthogonal Cutting and Oblique Cutting of Hardened Steel GCr15
Experimental Investigation on Air Cooling of GCr15
Research of Grinding Revolving Curved Surface with Arc Envelope Grinding Method
Study on Chip Breaking Behavior of 3-D Complex Groove Insert in Machining Carbon Constructional Steel at High Cutting Speeds
An Experimental Study on Diamond Cutting of Optical Glass
Characterization of Diamond Spherical Shell Thick Film by DC Plasma CVD
Theoretical and Experimental Research on Tapping of GH4169 and TC4 with Modified-Tooth Taps
Theoretical Research on Tooth Profile Modification with Electroplated CBN Hard Honing Wheels
Experimental Investigation on Cutting Force and Tool Wear of Carbide Tools in Ti6Al4V Turning
Influence of Drill Geometry in Drilling Carbon Fiber Reinforced Plastics
Research on Heating Density Function of Milling Insert with 3D Complex Groove
Experiment Study of Combining Micro EDM with USM
Experimental Research on Microelectroforming with Ultrasonic Agitation
Research on the Force Characteristics in Ultrasonic Grinding Nano-Zirconia Ceramics
Material Removal Rate Characteristics in Ultrasonic Aided Lapping of Engineering Ceramics Based on Single-Point Scratch
Experimental Investigation on Ultrasonic Face Machining of Glass with Free Abrasives
Optics Manufacturing Using Magnetorheological Finishing
Chemical Mechanical Polishing of Transparent Nd:YAG Ceramics
Research on Chemical Mechanical Polishing for Silicon Nitride Ceramics
The Molding Study of Polyimide Polishing Film
Effects of Conditioning Parameters on Pad Performances
Fabrication of Cylindrical Tungsten Microelectrode by Electrical Machining
Study on Technology of Block Electro-Discharge Grinding with Lower Working Voltage for Fabricating Micro Electrode
Design of Freeform Surface Finish Using Synchronous Processes of Electrochemical Finishing and Burnishing
Electrical Discharge Machining (EDM) Phenomena of Insulating ZrO2 Ceramics with Assisting Electrode
Research on Micro Electrochemical Milling
Preparation and Performance of Ceramic Coatings Formed by Micro Arc Oxidation on Titanium Alloy
The Effects of Laser Texturing Parameters on Wear Properties of Rollers with Fractal Geometry
Affected Characteristics Analysis of the Pulsed Laser Forming of Metal Sheet
Experimental Investigation on the Nickel-Based Metal Components Fabricated by Laser Cladding
Theoretical and Experimental Study on Laser Compound Forming of Plate
Nano-SiC Modified Plasma Sprayed Ceramic Coatings Prepared by Laser Sintering
Study on Integrated Method of Medical Implant Manufacture Based on Rapid Prototyping Technology
Study on Inner Micro-Grooves of Heat Pipe Spinning Process and Multi-Tooth Mandrel
Laser Surface Coating-Texturing of Cold Roll with Hard Dimples
Dynamic Characteristics Analysis of Diamond Saw Blade with Multi-Hole Base and Different Segment Width
Specific Energies in Sawing with Diamond Segments and Grinding of a Diamond Segment
Fundamental Study on Diamond Spherical Shell Film for Polishing of Concave Spherical Surface
Technique Project and Theoretic Research on Surface Finishing to the Wheel Hub
Experimental Research on Aluminum Alloy Blade’s Surface Roughness of Integrate Rotor Based on Four-Axis High Speed Milling
Research on Micro Characteristics of Surface and Subsurface Layer in Two-Dimensional Ultrasonic Grinding Nano-Composite Ceramics
Study on Surface Performance of Carbon-Aluminum-Carbon Electrode of Super-Capacitor in Dry WEDM
Surface Roughness in High Feed Turning with Wiper Insert
Influence of Turning by Burnishing on Surface Integrity to Analyze Feasibility of Hybrid Process
Study on Dry WEDMed Surface Quality of Mould Steel
Study on Influencing of Technological Parameter with Tools Wear during Turning Fluorophlogopite Glass-Ceramics
Wear Characteristics of Micro-Diameter Cutter in High Speed Machining Micro Parts
Influences of SiC Particle Size and Content on the Mechanical Properties and Wear Resistance of the Composites with Al Matrix
Tool Wear in High-Speed Milling of Ti-6Al-4V Alloy
Study on Erosion Wear Mechanism of SiC/(W,Ti)C Gradient Ceramic Nozzle Material
Analysis of Optimal Clamping Schemes for Aero-Multi-Frame Monolithic Components
Model and Simulation of Slurry Velocity and Hydrodynamic Pressure in Abrasive Jet Finishing with Grinding Wheel as Restraint
Research on Dynamic Physical Simulation of HSC Comprehensive Characteristics
Study on Impact Disrepair Mathematic Model and Groove Optimization of Cutting Tools for Machining Carbon Structural Steel
Theoretical Model of Surface Roughness for Polishing Super Hard Materials with Abrasive Waterjet
A Study of Exit-Burr Formation Mechanism Using the Finite Element Method in Micro-Cutting of Aluminum Alloy
Building and Simulation of the Digital Polishing Path of Mold Free-Curved Surface
Study on the Correlativity between Grinding Parameters and Surface Residual Stresses in Ceramic
Control and Analysis of Nonlinear Error for 5-Axis Machining of Hybrid Machine Tool
Fractal Characterization and Simulation of Surface Microtopography Machined with Abrasive Jet Precision Finishing with Grinding Wheel as Restraint
Studying the Expansion Uniformity of Intravascular Stents by the Effect of Laser Cutting Error
Gap Phenomena of Ultrasonic Vibration Assisted Electrical Discharge Machining in Gas
A Micro Milling Model Considering Metal Phases and Minimum Chip Thickness
Simulation of Surface Topography in Ball-End Milling Considering the Tool Deflection and Runout
Tool Cutting Force Modeling in High Speed Milling Using PSO-BP Neural Network
Investigation on Simulation for Grind-Hardening Temperature Field of Non-Quenched and Tempered Steel
Study on the Temperature Field of Cemented Carbide Substrate in Miniature EACVD System
The Research of Remote Monitoring and Intelligent Maintenance System for Large Asphalt Mixing Plant
Recognition for Spindle Speeds of Drill Press Based on Sound Signals Produced from Drilling
Precision Enhancement of Ucp710 5-Axis Machine Tool by Real Time Thermal Error Compensation
Study on Checking and Measurement of Double-Ball Bar for Thermal Error of CNC Machine Tools
The Influence of Thermocouples on the Measurement of Grinding Temperatures
Detection of the Tool Wear Condition Based on the Computer Image Processing
On-Machine Measurement for Touch-Trigger Probes and its Error Compensation
Prediction of Multiple Frequencies Chatter Stability in High-Speed Milling System
The Study of Five-Axis Graphic Simulation by Swept Volume Algorithm
A Cutting Process Parameter Optimization Expert System for Difficult-to-Cut Materials
Calculation and Optimization of Cutter Position for Flank Milling Spatial Cam Based on NURBS
A Study on Fractal Dimension of Grit Protrusion Topography of Diamond Grinding Wheel
A Terminal Sliding Mode Tracking Control Algorithm for Mobile Robots
Safety Prediction of High Speed Face Milling Cutter with Indexable Inserts
Study on the Wavelet Transform Based Monitor Signal Processing Method for Grinding Wheel Dull
Numerical Analysis on the Process of Laser Continuous Peen Forming of Metal Plate
Automatic Testing Equipment and Experiments Based on the Quantitative Shadow Method for Measuring Sub-Nanometer Deformations on Aspheric Surface
Study on Balance Precision of Ultra-High Speed CBN Grinding Wheel System
Analysis of the Effects of Multi-Clamps Fixture on Workpiece Location Errors
Study on Fuzzy Data Fusion for Real-Time Intelligent Recognition of Tool Wear State
Static and Dynamic Analysis of Carbon Nanotube Cantilever Based on Molecular Dynamics Simulation
Clamping Behaviour of Modern Jaw-Chuck with Centrifugal Force Compensation during High Speed Turning
Design and Simulation of Spring-Driven Lock-Unlock Mechanism for Spaceborne Flexible Appendages
On the Dynamics of Piezoelectric-Driven Stick-Slip Actuator
The Effect of Clamping Force on Static and Dynamic Characteristics of Spindle-Tooling System
Experimental Study of the Ultrahigh Speed Grinding Spindle System with a Squeeze Film Damper
Research on Dynamic Cutting Performance of High Speed Face Milling Cutter
Cutter Selection in the Milling of Thin-Web Components Considering the Machining Errors Control
Experimental Research on Machining Performance of Parallel Machine Tool
Design of Energy-Controllable Pulse Generator on Micro WEDM
Design of the Intelligent Turning Tool System with Adjustable Tool Geometry
Design of Rapid Powder Switch in Laser Cladding Rapid Manufacturing
Investigation on Strain Films in the Thin Film Resistance Strain Gauge
Development of the High Efficient Scanning Mechanism Using in Optical Space Remote Sensor
Research on Asymmetric and Negative Offset Mechanism of Large-Scale Steel Plate Rolling Shear
Development of Vision Guided Grinding System for Diamond Turning Tools
Study on the Distance between the Substrate and Hot Filament in the Development of Diamond Coated Cutting Tools
Research on Energy-Saving EDM Pulse Power Supply
Post-Processing Development of a New PTS-X Hybrid Kinematics Machine
Research on the Influence that Stop Position of Cerpet Tufting Machineto Yarn Tension and the Method of Elimination Stop Mark
Research on a Framework of Agent-Based Collaborative Job-Shop Scheduling
Advances in Machining & Manufacturing Technology IX
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
