Chapter
Crystal Structures and Thermal Properties of Bamboo Nanofiber Reinforced-Composite Friction Materials of Glass and Metal Wastes
Formation and Characterization of MMCs Alloy Al-5%Cu-4%Mg/SiC(p) by Thixoforming Process
Study on PbSn Composites Produced by Powder Metallurgy as Core Bullet Projectile
Electroless Plating of Al2O3 Particles Reinforced Composites
SrTiO3 Thin Films Deposition Using Pulsed Laser Deposition Technique
Crystallite Size Characterization of Mechanically Alloyed of (Ba,Sr) Hexaferrite and (Ba,Sr) Titanate Composite System
New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component
Nanosize Effects on Magnetic Properties and Peak Shifting of X-Ray Diffraction Pattern of BaFe12O19 Produced by Sol Gel Method
Quasi-Solid State DSSC Performance Enhancement by Bilayer Mesoporous TiO2 Structure Modification
Microstructure and Phase Analysis of La0.8Ba0.2TixMn(1-x)O3 System for Microwave Absorber Material (x = 0 – 0.7)
Crystallographic Properties of Aluminum-Doped Barium Zirconium Titanate Thin Films by Sol Gel Process
Lead-Free Oxide Thin Films for Gas Detection
Fabrication of Polymer Solar Cells on Flexible Substrate
Magnetic Behaviors of BaTiO3-BaFe12O19 Nanocomposite Prepared by Sol-Gel Process Based on Differences in Volume Fraction
Synthesis of Mesoporous Silica from Tetraethylorthosilicate by Using Sodium Ricinoleic as a Template and 3-Aminopropyltrimethoxysilane as Co-Structure Directing Agent with Volume Variation of Hydrochloric Acid 0.1 M
Optimizing the Nanostructural Characteristics of Chemical Bath Deposition Derived ZnO Nanorods by Post-Hydrothermal Treatments
Effect of CaO Dopant on the Dielectric Properties of NiO
Numerical Modeling of Ship Composite-Based on Aluminum Casting as Alternative Materials for Ship Building
High Coverage ZnO Nanorods on ITO Substrates via Modified Chemical Bath Deposition (CBD) Method at Low Temperature
Quantum Approximation for Josephson's Tunneling in Thx DUO2 Nano Material for 535 Tesla at Muon Cyclotron
Microstructural Characterisation and Microwave Absorption Characteristics of La(1-x)BaxFe0.25Mn0.5Ti0.25O3 (x = 0, 0.25, 0.75, 1)
Performance of Natural Carotenoids from Musa aromatica and Citrus medica var Lemon as Photosensitizers for Dye-Sensitized Solar Cells with TiO2 Nanoparticle
Synthesis and Characterization of Nanocrystalline TiO2 by Non-Aqueous Sol-Gel in Acidic Condition for Dye-Sensitized Solar Cells
Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite
Photocatalytic Degradation of C.I. Reactive Red 2 by Using TiO2-Coated PET Plastic under Solar Irradiation
Synthesis of SnO2 Nanostructure Thin Film and its Prospective as Gas Sensors
Preliminary Observation on Macro Texture of Nb3Sn Low Temperature Superconductor (LTS)
Characteristics of Heat Treated Al7Si-Mg-Zn - 5 wt.% SiC Squeeze Casted Composite with Variation of Mg Content for Tactical Vehicle Application
Reduction of Nickel Ion Release on a TiO2 Coated onto an Orthodontic Wire
Properties of Fe-Mn-C Alloy as Degradable Biomaterials Candidate for Coronary Stent
Synthesis and Characterization of Silica-Lavender Microencapsulation by Sol Gel-Emulsion Method for Anti Mosquito Textile
Sensitive Layer Thickness Dependence on Microcantilever Sensor Sensitivity
Biocompatibility Improvement of NiTi Orthodontic Wire from Various Coatings
Synthesis and Characterization of Bacterial Cellulose-Based Carbon Nanotube by Catalytic Graphitization
Synthesis and Characterization of TiO2 Nanoparticle Using Starch as a Template by Sol-Gel Method for the Application of UV Protection
Building Materials Composition Influence to Sound Transmission Loss (STL) Reduction
Contribution of Short Coconut Fiber to Pavement Skid Resistance
Chapter 2: Polymer and Ceramics
Classification of Ceramic Tiles by Identifying Defect on Ceramic Tile Surface Using Local Texture Feature
Structural Characterization of Mullite-Based Ceramic Material from Al2O3 and Silica Xerogel Converted from Sago Waste Ash
Correlation of Normal Incidence Sound Absorption Coefficient (NAC) and Random Incidence Sound Absorption Coefficient (RAC) of Polyester/Ramie Fibre Composite Materials
A Study on the Structure of Novel Polyurethanes Derived from γ-Valerolactone-Based Diol Precursors
Grain Growth in Millimeter Wave Sintered Alumina Ceramics
The Dinamic Cyclic Trend Phenomena of Cement-Fly Ash Smart Concrete Compressive Strength and Resistivity in Various Composition of Polymer Carbon Fiber
Preparation of the Edible Biocomposite Film Gelatin/Bacterial Cellulose Microcrystal (BCMC): Variation of Matrix Concentration, Filler, and Sonication Time
Synthesis of Poly(1-vinyl-1,2,4-triazole) and Preparation of Proton Conducting Membrane for High Temperature Operation
Characteristics of Environmental Friendly Labeled Plastic Shopping Bags in Indonesia
Chapter 3: Materials and Manufacturing Processes
SKD 61 Material Surface Treatment with Electric Discharge Machining Using Cu, CuCr & Graphite Electrodes and Dielectric Fluid Jatrophacurcas
Application of Shot Peening and Shot Blasting to Increase Hardness and Depth of Nitride Hardened Layer to the Modified H13 Steel as Die Casting Die Materials
Optimization of Multiple Performance Characteristics in the Wire EDM Process of AISI D2 Tool Steel Using Taguchi and Fuzzy Logic
Characterization of Al-7Si-Mg-Cu Turbine Impeller Produced by Investment Casting
Research on the Manufacturing of Steam Turbine Blade by Using Investment Casting Technology
Mechanical Properties and Microstructure of Welded Dissimilar Metals Using Buttering & Non-Buttering Layer
Comparison of Commercially Pure Titanium Surface Hardness Improvement by Plasma Nitrocarburizing and Ion Implantation
Effect of Phenolic Resin and Alignment to the Quality of Prototype Composite Railway Brake Blocks
Effects of Welding Parameters in Micro Friction Stir Lap Welding of Aluminum A1100
Preparation of Uranium Nitride from Uranium Metal through by Hydriding and Nitriding Process
Simulation of Metal Flow to Investigate the Application of Antilock Brake Mechanic System in Deep Drawing Process of Cup
Effect of Equal Channel Angular Pressing and Post Heating on Microstructure and Hardness of Cu-Zn 70/30
Materials Selection in Appropriate Technology Four Focuses in Design Thinking
Study about Surface Hardening on Local Disc Brakes with Direct Current Plasma Nitrocarburizing Apparatus
The Effect of Vertical Step Block Casting to Microstructure and Mechanical Properties in Producing Thin Wall Ductile Iron
Resolving Individual Solute Levels of AA6061 through Multiple Sub-Ambient Temperatures Thermoelectric Power Measurements
Effect of Rolling Direction to the Strength of a Thin-Walled Steel SHS Beam under Concentrated-Compressive Load and Bending Moment
Optimization Design of Airfoil Propellers of Modified NACA 4415 Using Computational Fluids Dynamics
Analysis of Micro-Channels Manufacturing of Acrylic Using Low Power CO2 Laser
Thickness and Fiber Content Optimization in VARTM Method for High Speed Craft
Vane-Turbine as an Energy Conversion in the Propeller Slipstream of Single Screw Ship
Application of Al2O3 Nanofluid on Sintered Copper-Powder Vapor Chamber for Electronic Cooling
Real-Time Monitoring System of Dieless Bellows Forming Using Machine Vision
Springback Prediction Compensation and Optimization for Front Side Member in Sheet Metal Forming Using FEM Simulation
Low Speed Electric Machine Used for Electric Generating from Savonius Windmill
Physics and Chemistry Test on Aluminum-Based Composite Materials as an Alternative Material for the Manufacture of Brake Drum
Oxidation Characteristics of Various Nickel Composite Coated on Ferritic Stainless Steel
Chapter 4: Corrosion and Degradation of Materials
Hot Corrosion of Aluminized 1020 Steel with NaCl Deposit
Improvement of Stress Corrosion Resistance in Aluminum Alloy 7075 through Retrogression and Re-Aging Modification
Behavior of CO2 Corrosion of API 5L X52 Steel in NaCl Solution under Turbulent Flow Condition
Effectiveness of Myrmecodia Pendans Extract as Eco-Friendly Corrosion Inhibitor for Material API 5L Grade B in 3,5% NaCl Solution
Influence of Intermetallic Inclusion to Brittle Fracture of Electric Motor Shaft AISI 1045 under Torsion Loading
High Temperature Oxidation Behavior of Co-Based Coating at 800o C as Alternative Coating Material for SOFC Interconnect
Contribution of Galvanizing Layer to Hydrogen Induced Cracking Failure of AISI 4140 Bolt for Padeye Fixing in Marine Environment
Corrosion Inhibitor Performance with Presence of FeCO3 Film in CO2 Corrosion Environment under Fluid Flow Effect
Corrosion of Concrete Using Portland Composite Cement and Rice Husk Ash under Simulated Acid Rain Environment
Chapter 5: Extraction of Materials
The Influence of Coal and Reduction Process Parameters in Producing Iron Nugget
Sulfuric Acid Leaching of Bangka Indonesia Ilmenite Ore and Ilmenite Decomposed by NaOH
Submerged Ultrafiltration for Minimizing Energy Process of Refinery Wastewater Treatment
Anatase TiO2 Enrichment from Bangka Ilmenite (FeTiO3) and its Photocatalytic Test on Degradation of Congo Red
Practical Isolation of Bullatacin from Annona muricata Leaves Extract Using an Open Column Chromatography Technique